Reviews Hole Tool

Luckyway 10-Piece Screw Extractor and Left Hand Drill Bit Set, Bolt Extractors, for Removing Broken Studs, Bolts, Socket Screws, and Fittings

  • ..., handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit..
  • HOW TO USE - A broken bolt or screw may be removed from a hole with a Screw Extractor. First, drill a hole in the broken bolt. The correct drill size to use is stamped on each Screw Extractor. Insert Screw Extractor in the hole and, with a Tap Wrench, turn counterclockwise. The Screw Extractor acts like a corkscrew. It grips into the sides of the drilled hole and removes the broken part on its own threads without damaging the threaded hole..
Check Stock

DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch)

  • DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel.
  • DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel.
  • All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes.
  • All quick change mandrels utillize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications..
Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
  • IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
Check Stock

SPEEDWOX Ceiling Grid Punch Pliers 10 Inches Grid Hole Punch for Rivets Multifunctional Puncher Pliers for Metal Sheet

  • 【APPLICATIONS】The hole puncher will make a very clean hole, cut easy and don't have squeeze very hard to puncture through. This tool is a real time saver when there is a need to install pop rivets in the dropped ceiling grid structure. The pliers is widely used for the opening of thin metal sheet in the decoration, hardware processing and other industries..
  • 【DESIGN】The replaceable hardened die tip will remain super sharp throughout your project. It can put perfect hole in two pieces of ceiling grid in seconds. The little rubber tip prevents any scratches on the metal grid. This tool is well constructed and will last a long time..
  • 【MATERIAL】Chromium vanadium alloy steel is very sturdy and heavy duty. The hole punch in the metal without much effort. This tool is well constructed and will last a long time. The antirust oil may be appeared on the tools, it will not affect the function, just wipe it clean with a duster cloth..
  • 【COMFORTABLE HANDLE】Non-slip ergonomic handles for single-hand operation which can greatly reduce fatigue after long time work..
  • 【CUSTOMER SUPPORT】 We value every single customer feedback, always friendly customer service behind SPEEDWOX products, 100% MONEY BACK guarantee..
Check Stock

Leather Working Tool, Leather Hole Punch, Half Round End Punch Leather, Leather Punch Shapes, DIY Embossing Punching Cutting Grinding Tool, Hole Hollow Punch Cutter, 18pcs

  • [Punching Tool]: This leather craft embossing punch can help you punch holes in the leather to obtain the desired shape.
  • [18PCS]: There are 18 This leather craft punching tool in total, which can be used for a long time.
  • [High-quality Steel]: This leather hole punch is made of high-quality steel with good durability.
  • [Portable Size]: The size of This diy embossing punching cutting grinding tool is very suitable for carrying, you can use it at any time.
  • [Application]: This hole hollow punch cutter is mainly used for leather craft embossing punching tool, DIY leather punching, cutting tool polishing.
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Leather Hole Punch & Belt Hole Puncher Easily Punches Perfect Round Holes. Bonus Ruler & Awl Tool. Leather Punch Tool for Watch or Bag Strap, Fabric, Eyelet - Precision Crafting & Professional Results

  • RESIZE YOUR BELT EASILY – You only get one chance to make a hole which is why this set comes with a see-through ruler and awl tool to measure & mark your hole position and easy-to-follow instructions so you don’t make mistakes..
  • SUPER CLEAN HOLE AND NO FRAYING – With sharp manganese steel blades that slice through leather, this heavy duty single hole punch is professional quality and built to be strong and precise so it stands up to years of neat hole punching..
  • EASY TO USE – The gently cushioned, double-lever handles take the strain out of hole punching which is great if you have a weaker grip and ideal for repetitive craft work and punches 6 popular hole sizes – 2mm, 2.5mm, 3mm, 3.5mm, 4mm & 4.5mm.
  • CREATE GREAT LEATHER PROJECTS – It’s a no brainer for serious craft enthusiasts, DIY, bags, grommets & eyelets, dog collars, saddles & reins, sandals & shoes, store & id cards and so many other fun leather works..
  • NOT JUST FOR LEATHER – The Pro Hole Punch works with a huge variety of materials including paper, card, felt, tarpaulin, vinyl, paper, canvas, soft plastic, silicone and rubber so you don’t need a separate tool for those materials..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

FiberShack - 3 Hole Fiber Stripper with 6' TPR Handle - Fiber Optic Stripper includes 1.5mm Hex Key for Fine Adjustments of Fiber Striper

  • INDUSTRY PROVEN DESIGN: Our Fiber Cable Stripping tool is field tested to deliver consistent performance. Ideal for use with both FTTH and industrial FTTX, FTTB & FTTP systems..
  • ADJUST WITH EASE : Precision tune your Fiber Cutter tool with a 1.5mm Allen Key included. Our Fiber Cable Cutter hex key ensures more accurate cable cuts than a conventional fiber optic tool.
  • QUALITY DESIGN - Every fiber optic cable stripping tool has a Thermoplastic handle and is tested after production to ensure a consistent high quality cut out of the box.
  • CUT DEPTH RANGES: Hole 1 - 1.6 > 3 mm fiber jacket cuts down to the 600 - 900 micron buffer coating. Hole 2: strips the 600-900 micron buffer coating down to the 250 micron coating. Hole 3: cleanly strips the 250 micron cable down to the glass fiber..
  • TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We always found it difficult to source raw materials for jobs at short notice, and at a good price. So we started to source our own fiber products for HDTV, SDI, and Analog MATV systems. This need has created our brand, Fibershack, your mission critical supplier for all Fiber Optic needs..
Check Stock