Reviews Hole Saw Kit For Metal

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • Professional high speed steel M42 (not M3) with cobalt 8% cutting teeth hardened to control the efficient and durable and reliable use on workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill ....
Check Stock

PLG2SUPT Recessed Light Hole Saw Kit 6-3/8,5-3/8,4-3/8,3-1/8 Inch Carbide Grit for 6”,5”,4”,3” Light Cutting Drywall, Ceiling Tile

  • This recessed light Carbide grit hole saw cutter Install kit includes: 3-1/8”(79mm), 4-3/8”(111mm), 5-3/8”(137mm), 6-3/8"(162mm) hole saw bit, 1 of 0.43”(11mm) hex shank large arbor, 2 of 3.5" (89mm) pilot HSS drill bits.
  • The carbide grit edge hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • The hole saw teeth is specially designing. It’s more sharp and more fast than tradition one. 4 pack hole saws are good match. It’s for professional choice..
Check Stock

8Pcs Concrete Hole Saw Kits with 40mm 65mm 80mm 100mm 125mm 5pcs Carbide Steel Wall Hole Saws, 110mm Connecting Rod with SDS Plus Shank, 2 pc Center Drill Bits for Brick Cement Stone Wall

  • This hole saw cutter kit are made of high quality carbide tipped metal, hard and durable.
  • The connecting rod is 110mm long and with SDS plus shank..
  • This hole saw cutter kit can be used in drilling walls, stones, installing air conditioners, range hoods, pipeline opening, etc..
  • You will get 8pcs items, 5pcs hole saw cutters, 1pc 110mm connecting rod and 2pcs 110mm center drill bit..
  • The concrete hole saw kit is very easy to install and operate..
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

ASNOMY 12Pcs M42 HSS Bi-Metal Hole Saw Set, 11/16 inches - 3 inches Large Size Hole Opener Hole Saw Cutter Tool for Drilling Cornhole Board, Plastic, Pipe, Wood, Fiberboard, Soft Metal

  • 12PCS Bi-Metal Hole Saw Kit: Include 11/16″(18mm) , 13/16″(20mm), 15/16"(24mm), 1-1/8"(28mm), 1-3/16"(30mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(45mm), 2"(50mm),2-3/16"(55mm),2-9/16"(65mm), 3"(75)mm,a variety of sizes can meet your different needs,the cutting depth is 1-3/16"(30mm). Each hole saw has a arbor with drill bit..
  • Top Quality: This Hole saw set made from M42 HSS and Bi-Metal,make it have higher hardness (≥64HRC) and higher toughness than standard hole saw, better cutting performance, so that it can cut ceiling tiles and gypsum board smoothly.
  • Cutting is more efficient and clean: The hole cutter made of heavy-duty bimetal and unique sharp HSS has sharper teeth, and has four chip evacuation holes, which has more powerful chip evacuation capability. Make it possible to quickly remove the cutting material, and the cutting edge is smoother.
  • Wide Application: This 4 hole Saw blade perfect for drilling metal sheet, drywall, plastic pipe, wood, PVC, fiberboard, grommet hole, recessed light and can light hole Drilling..
  • Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP..
Check Stock

HSS Hole Saw Kits for Metal, Rocaris 23 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 16~100mm

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and chip evacuation smoother.It can extend the service life..
  • 【Top Quality】Made of High Speed Steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient than flat tooth drilling..
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
Check Stock

tonchean 23PCS Carbide Hole Saw Kit 5/8 to 4 Inch Metal Hole Saw Cutting Set Hole Cutter TCT Metal Drill Bit Opener Cutter Tool for Hard Metal Stainless Steel Iron Wood Plastic

  • 【MATERIAL】Metal hole saw set is made of high quality tungsten carbide steel. Sharp knife edge with undetachable twist drill bit. High hardness makes it durable..
  • 【FEATURES】 Hole Saw Bits cut precise holes in stainless steel plate, mild steel, alloy steel, iron, copper, aluminum, castings, plastic and brass. And the hole saw cutting kits are available for lots of different sizes to meet most of your needs..
  • 【APPLICATION】The hole saw kit is suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【TIPS】When processing stainless steel, please keep the drilling rig running evenly at a low speed, or punch the center hole in advance, which can better extend the service life of the product..
  • 【DIAMETER】Metal hole saw incluedes total 23 diamters from 16 to 100 mm.Including 16 mm/0.63'', 18 mm/0.71'', 20 mm/0.79'', 22 mm/0.87'', 25 mm/0.98'', 26 mm/1.02'', 28 mm/1.1'', 30 mm/1.18'', 32 mm/1.26'', 35 mm/1.38'', 38 mm/1.5'', 40 mm/1.57'', 45 mm/1.77'', 48 mm/1.89'', 50 mm/1.97'', 53 mm/2.09'', 55 mm/2.17'', 60 mm/2.36'', 65 mm/2.56'', 70 mm/2.76'', 75 mm/2.95'', 80 mm/3.15'', 100 mm/4''..
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • 【Bi-Metal 6-3/8-Inch Hole Saw】The 6 3/8in hole saw made of HSS carbon steel & Bi-metal steel, heavy-duty steel construction and carbide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
  • 【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gy....
Check Stock

12Pcs Concrete Hole Saw Kits, 35mm 40mm 50mm 65mm 80mm 110mm 6pcs SDS Plus Shank Masonry Hole Saw Cutters, 110mm and 350mm Connecting Rod, 4 Center Drill Bits

  • The hole saw cutter kit are made of high quality carbide tipped metal for long time use..
  • Connecting rod length: 1* SDS PLUS 350mm, 1* SDS PLUS 110mm..
  • Hole saw cutters drilling diameter: 35mm, 40mm, 50mm, 65mm, 80mm, 110mm..
  • Concrete hole saw kit is widely used for drilling walls, stones, bricks or installing air conditioners, range hoods, pipeline opening, etc..
Check Stock