Makita E-00072 14\ Guide Bar, 3/8” LP.043”

  • ... new, making your work more time-saving and labor-saving!.
  • 【Intimate & Perfect Design】 - In order to suit different types of different hole chains, chain saw sharpener are designed with 2 holes for fixed sharpening, one hole fixed and the other moving back and forth, very flexible. Check in advance your chainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it..
  • 【Easy To Use】 - It is as easy to use as a pencil sharpener.
  • just set the clamp to the rod, position the pawl on the tooth, insert the burr into the guide sleeve, and turn the handle.Use it to precisely sharpen the chain of a chain saw to sharpen the chain and make gardening work smoother. Made of high-quality alloy material, it is durable and more sturdy..
  • 【Easy to Install】 - The chain saw sharpening tool is installed in the sharpener and can be installed and used at any time so that your chain can be sharpened in a short time. Keep oil on the chain and rails to reduce friction and extend service life..
  • 【Perfect Choice】 - Every time you grind a tooth, you only need to pull the chain.The precise sharpening can ensure that every tooth is repaired!Standard 30° sharpened front ....
Check Stock

ASNOMY 12Pcs TCT Hole Saw Kit for Hard Metal, 5/8\ to 2-1/8”Inch Tungsten Carbide Tipped Metal Hole Saw Set, Heavy Duty Hole Cutter for Stainless Steel, Iron

  • ...its high hardness, rust proof, sturdy and durable;.
  • 【Size】Cutting diameter:5/8"(16mm),3/4"(19mm), 7/8"(22mm), 1"(25.5mm),1-1/8"(29mm), 1-1/4"(32mm), 1-3/8"(35mm), 1-3/4"(45mm), 2"(51mm), 2-1/8"(54mm), Cutting Length: 25mm(1Inch), Shank Dia.: 10mm(2/5 Inch) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Widely Application】This hole saw kit quickly and accurately cuts metal materials up to 1" (25mm) thick. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal;Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 10pc T.C.T Hole Saw set and 2pcs Extra Titanium-Plated Pilot Drill bit, 10pcs hex wrenches, All hole saws are packaged in individual boxes, and each bit is also oiled (Prevent rust), which is definitely a perfect gift for you and your family..
Check Stock

Disston E0215000 Blu-MOL RemGrit Hole Saw Accessories Dust Bowl & GoSports 6\ Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards

  • Product 1: Accessories Are Available For All Remgrit Hole Saws.
  • Product 1: Item Package Dimension: 5.25" L X 11.5" W X 11.5" H.
  • Product 2: CONSTRUCTION GRADE: Heat treated carbon steel alloy 6 inch hole saw blade, non binding clean edge design.
  • Product 2: PROFESSIONAL CUTTING: Hole saw cuts smooth and even 6 inch diameter holes through wood, drywall, plaster and thin metal.
  • Product 2: PROJECT TOOL: Built tough for repeat use and handy for working on corn hole boards, air ducts, ceiling lights, speakers and more.
  • Product 2: DIY READY: Includes everything you need to do it yourself, mandrel and drill bit work with any 3/8 inch drills & up.
Check Stock

shuoguoleilei Chainsaw Sharpener, Chainsaw Sharpening Kit Chain Saw Blade Sharpener Fast Sharpening Stone Grinder Tools Bar Mounted Fit for 14 16 18 20 Inches with 5 Whetston (Black)

  • QUALITY MATERIALS: Made of premium ABS plasticthis lightweight and durable chain saw blade is suitable for most Single hole, double hole, no hole, chains on the market..
  • LIGHTWEIGHT AND PORTABLE: This chain saw blade sharpener is lightweight and portable, size:8.26" ×5.51" ×1.18", weighting for 300g with a portable case and the chain saw sharpening tool is easy to use outdoors..
  • EASY TO USE: Just attach the chainsaw on the two holes of the sharpener. Then close and lock the sharpener. Finally, gengly squeeze the chainsaw. Your chain saw will become sharp after 3-5 seconds..
  • UNIVERSALITY: Fits most 14/16/18/20 inch chainsaws and petrol saws are available, Wide range of applications. There are 2 pins on the chainsaw sharpener for fixing the chainsaw bar. The second pin is adjustable. The distance between these 2 pin (holes) is about 0.7-1.3inch..
  • PACKAGE: You will get 1 chainsaw sharpener, 5 Whetston and 1 portable case suitable for taking outdoor. If you have any other questions about the chain saw sharpening kit, please contact with us..
Check Stock

Lynx 5' Two Man Crosscut Saw

  • These are the Original Handles, with Hardware, for the Lynx Two Man Cross Cut Saws..
  • Should work for just about any two man saw as long as there is an existing hole in the saw blade at the intended attachment location..
  • Easy to attach and detach. Slide the end of the blade into the handle’s bolt slot, insert the pin through the hole, line up the profile hardware on both sides of the handle and tighten the wing nut..
  • Overall handle length about 14”. Diameter of the handle is about 1-1/4”..
Check Stock

10 PCS 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Hole Saw Set: Package includes 10 pcs Desk Wire Cord Cable Grommets, 1pcs 2 inch M42 Bi-Metal hole saw, 1pcs 7/16 inch hex drilling shaft, 3pcs drill bit, and 1pcs M4 Hex wrench..
  • Hole Saw Drill Bit: The hole saw drill bit is made of M42 high-speed steel saw blade for better performance in durability and toughness, the cutter head is pointed and can open holes efficiently..
  • Desk Cable Grommets: Made of quality plastic, good comprehensive performance, wear-resistant, corrosion-resistant, durable to use. Removable cover, with an opening hole sleeve, which can open the hole and clip-on top cover, so if you have a lot of cords, you can use the desk grommet without cover..
  • Easy to Install: Just assemble the hole saw with the included hex wrench and drill the hole where needed, punching a hole first, then place the main part of the grommet directly into the hole, the overall size of grommets measures 2.5 x 0.77 inch (Dia. x H), fitted with the mounting hole diameter is 50 mm/ 2 inch..
  • Wide Application: Desk cord grommet can effective cable and wire management, neatly organize the wires from computer desks, PC peripheral, office equipment, entertainment systems in home, office and school..
Check Stock

ASNOMY 7PCS TCT Hole Saw Kit for Metal, 16-30mm Tungsten Carbide Tipped Hole Saw Hole Cutter Drill Bit with Titanium-Plated Pilot Drill bit for Hard Metal, Stainless Steel, Iron, Wood, Plastic

  • ...ters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable;.
  • 【Size】Cutting diameter:5/8"(16mm),23/32"(18.5mm), 25/32"(20mm), 1"(25mm),1-3/16"(30mm), Cutting Length: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal;Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 5pc T.C.T Hole Saw set and 2pcs Extra Titanium-Plated Pilot Drill bit, 2pcs hex wrenches, each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust), which is definitely a perfect gift fo....
Check Stock

Chainsaw Sharpener with 4Pcs Whetstons Chain Saw Blade Teeth Sharpener Bar Mounted Chainsaw Sharpener Universal Fast-Sharpening Stone Grinder Tools for 14/16/18/20 Inch One/Two Holes Chain Saw Bar

  • 【Quality Materials & General】 - Made of premium ABS plastic, this lightweight and durable chain saw blade is suitable for most 14" / 16" / 18" / 20" chains on the market. There are 2 pins on the chainsaw sharpener for fixing the chainsaw bar. The second pin is adjustable. The distance between these 2 pin (holes) is about 0.7-1.3inch (Note: not compatible with ECHO 16 chain saw). (Note: not compatible with ECHO 16 chain saw).
  • Easy Operation: open, attach on the 2 holes, close and push the lock, then gently squeeze down until the saw touches the whetstone. In order to suit different types of chains, chain saw sharpener are designed with 2 holes for fixed sharpening, one hole fixed and the other moving back and forth, very flexible. Check in advance your chainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it..
  • Safe and Fast: This chainsaw sharpening kit is easy to use and protect your hands from harm.Your hands don't need to touch the whetstone, just squeeze the chain saw, the chainsaw can be sharpened in seconds..
  • Lightweight: The new chainsaw teeth sharpener provides a simple and fast method of sharpening the saw chain.It can be used at ....
Check Stock

40mm HSS Tungsten Carbide Hole Saw, TCT Cutter Drill Bit for Metal Stainless Steel Wood Aluminum

  • ❶SIZE: 40mm(1-9/16”) hole saw diameter, 86mm(3.38”) length, 10mm(0.39”) shank..
  • ❷RESISTANT and DURABLE: hole saw is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance..
  • ❸PRECISE and EFFICIENT: tungsten carbide teeth of the hole saw is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass..
  • ❹WIDE RANGE of APPLICATIONS: hole saw kits are suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine..
  • ❺ALL IN ONE DESIGN: drill bit, spring, wrench are included, no need to buy extra accessories..
Check Stock