Reviews Hole Enlarging Reamer

BestNest Classic Three-Woodpecker House

This home provides a wonderful roost to specific woodpeckers.
2.5" diameter entry hole is perfect for red-headed, hairy, or red-bellied woodpeckers.
Metal guard around the entry prevents them from enlarging it.
All wood construction remains lovely and durable.

This home provides a wonderful roost to specific woodpeckers.
2.5" diameter entry hole is perfect for red-headed, hairy, or red-bellied woodpeckers.
Metal guard around the entry prevents them from enlarging it.
All wood construction remains lovely and durable.

Use on Hardened steel, fired ceramics and other hard materials.
Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit.

The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels.
The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort.
Reamer T handle for easy reaming.The removable handle facilitates compact storage..
Material of Taper Reamers: high carbon steel heat treatment, longer service life.
Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13mm) size and 1/5" -5/8 "(5mm -16mm) size.

Set of 2 homes provides wonderful roosting spots to specific woodpeckers.
2.5" diameter entry hole on each is perfect for red-headed, hairy, or red-bellied woodpeckers.
Metal guard around the entry holes prevent other animals from enlarging them.
All wood construction remains lovely and durable.

...w it firmly into the newly tapped head.
Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
PERFECT SIZE: 14mm reamer with 12 points.
Use with 3/8-inch drive ratchet or wrench.
Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
Measure your plug diameter, thread, and pitch to see if this kit is compatible.
PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.

The product is 1/8 Inch Diameter, Tungsten Carbide Cutter.
Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
Secure objects to a stable surface while working.
Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure.
Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics.

High Quality - Made of premium 45# Steel, it is durable, stable and high strength. And the cutting edges is sharp for expanding the hole..
Function - It is an ideal way for reaming the hole in metal sheets and plastic without effort, which is not easy to drill..
Design - With removable T-handle, it can save you the power to reaming and control..
Specification - This reamer can expand hole of size from 1/8" to 1/2"..
100% Satisfied Service - Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!.

Non Slip: Using aluminum alloy handle, knurled cover treatment, non slip design, comfortable grip, easy to operate, light and durable punching reamer..
Wear Resistant: The steel reamer bit is stable and durable after heat treatment and machining, with high strength, wear resistance, good performance and long service life..
Widely Used: Ideal tool for RC model cars for drilling and trimming RC bodies. Suitable for different kinds of RC helicopters, airplanes, cars, boats, tanks, etc..
Ergonomic Design: The handle is ergonomically designed for a comfortable grip. Scissors for trimming RC car shell, compact and lightweight, the curved design of the tip makes you more effortless when using it..
Hole Saw Size: It can be drilled with a diameter of 0-14mm, with good toughness, no deformation, no scratches on the car shell, and a tight fit, saving your time and energy..