Reviews Hole Boring Tool

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

VeYocilk Lathe Threading Carbide Inserts:10 Pcs 11IR A60 1/4 Carbide Inserts for Internal Threading Holders CNC Cutting CNC Turning Tool

  • High Efficiency: This turning tool holders kit for semi-finishing and finishing operations, can reduce the tool grinding cost and improve the cutting efficiency..
  • High Performance: Made of carbide and the coating material is TIN, it can be used for processing steel, the inserts has high hardness, low friction coefficient, good wear resistance and strong impact resistance..
  • Threading Boring Bars: The material of the boring bar is 40Cr steel, widely use, tightly impacted bolt, simple structure, often used for small hole machining..
  • Package Includes: 1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench..
  • Best Service: The carbide inserts and turning tools holder are packed in plastic containers, which is safe and easy to store. Any more question about this item, please feel free to email us..
Check Stock

Sandvik Coromant CoroDrill Carbide Drilling Insert, 4 Edge, 880 Style, GC1044 Grade, TiAlN Coating, 880-07 04 06H, 0.1575\ Thick, 0.0236\ Corner Radius (Pack of 10)

  • Benefits of this product family : ​Entering the workpiece with an assymetrical drill by default generates an unbalance. Step technology provide a step-by-step entry with lower cutting forces, and therefore enable a higher productivity as well as close hole tolerances..
  • Inserts and geometries, available for all materials and applications, provide high productivity and extended tool life..
  • With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..
  • ​Wiper geometry for best surface finish or higher feed possibilities.
  • Optimized chip channels for accelerated chip evacuation.
Check Stock

Gleaming Isles : Complete Series Box Set (Feel Good Reads Book 1)

  • Because Life is Too Short to Drive Boring Cars with Lifted 4x4 Off Road Rough Terrain Adventurer JL Spare Tire Cover Backup Camera Hole Black Size 32 Inch with Grommets.
  • EASY "NO TOOL" INSTALLATION - This Spare Tire Cover Is Easy To Install And Remove And No Tools Required. Heavy Duty Bungee Cord. Quick install for your trailer tire cover..
  • GOT A BACKUP CAMERA - Your going to need the JL tire cover with the camera hole cutout. Find a cool tire cover - dog tire covers, paw tire covers, girl tire covers, american flag tire covers..
  • CHECK YOUR SIZE On The Sidewall Of The Tire. Common sizes for Spare tire Covers with a Back Up Camera Hole are 245/75r17 32 inch, 255/70r18 32 inch, 285/70r17 33 inch.
  • MADE IN USA - This Spare Tire Covers are Printed in USA with American Pride. Our American Flag Tire Covers are Patriotic and show your spirit..
Check Stock

Sandvik Coromant, 880-07 04 06H-C-LM 1144, CoroDrill 880 Insert for Drilling, Carbide, Right Hand Cut, 1144 Grade, (Ti,Al) N+(Al,Cr)2O3 (Pack of 10)

  • Benefits of this product family : ​Entering the workpiece with an assymetrical drill by default generates an unbalance. Step technology provide a step-by-step entry with lower cutting forces, and therefore enable a higher productivity as well as close hole tolerances..
  • Inserts and geometries, available for all materials and applications, provide high productivity and extended tool life..
  • With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..
  • ​Wiper geometry for best surface finish or higher feed possibilities.
  • Optimized chip channels for accelerated chip evacuation.
Check Stock

Sandvik Coromant 880-D1200L20-03 Corodrill 880 Indexable Insert Drill, 880.L-03 (01) Tool Style Code, 0.787\ Shank, 20 mm Shank Diameter (Pack of 1)

  • INDEXABLE DRILL: Versatile, carbide insert drilling tool and inserts for excellent tool life and holemaking performance.
  • Patented STEP TECHNOLOGY to deliver excellent cutting force balance and indexable drilling productivity.
  • INSERT SIZE & POCKET POSITIONING: Size 880-01 insert size, Central and Periphery drilling inserts.
  • DRILL SHANK AND TYPE: Cylindrical with flat shank, coolant through the drill, metric design.
  • With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..
Check Stock

ERYTLLY Bulb Planter, Auger Spiral, Garden Planter Tool 3 x 17.5 inch,Rapid Umbrella Hole Digger for Planting Bulb Seedlings Bedding Tulips, and Digging Weeds Roots

  • ...dscapers’ choice for dramatically increased efficiency when plant hole digger planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, paint, or batches of mortar mix. Simplify drilling tasks such as digging weeds roots, taking soil samples, boring plant holes or erecting fences.
  • BUILT TO LAST BULB PLANTER: Dimensions of garden auger 5/8-inch (1.6 cm) steel shaft with non-slip hex drive.
  • 3-inch (7.6cm) diameter x 17.5-inch (61cm) length.
  • Durable 10-gauge flighting on a heavy duty 5/8-inch steel shaft with durable black powder coated.
  • EASY TO USE BULB PLANTER TOOL: Use a 5/8-inch or bulb planter tool on low (slow) speed, drill into soil or applicable landscape straight down 17.5 inches, and lift out of hole.
  • For cordless drills a 14V drill minimum is recommended.
  • Keep auger clean from soil and debris when not in use.
  • MACHINED POINT KEEPS IT STEADY：The Point on auger drill bit hits the ground first and keeps it steady when you are digging hard grounds. Bulb auger is also a minimal distance between the digging blade start and the point, so auger drill bit will start working on hard ground without having to push down. Planting auger not for us....
Check Stock

Sandvik Coromant (SANF) 880-01 02 W04H-P-LM 4334, CoroDrill 880 Insert for Drilling, Carbide, Right Hand Cut, 4334 Grade, Ti(C,N)+Al2O3+TiN, Wiper, Inveio Coating Technology (Pack of 10)

  • Benefits of this product family : ​Entering the workpiece with an assymetrical drill by default generates an unbalance. Step technology provide a step-by-step entry with lower cutting forces, and therefore enable a higher productivity as well as close hole tolerances..
  • Inserts and geometries, available for all materials and applications, provide high productivity and extended tool life..
  • With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..
  • ​Wiper geometry for best surface finish or higher feed possibilities.
  • Optimized chip channels for accelerated chip evacuation.
Check Stock