Hifonics BXX4000.1D Brutus Class D 4000W RMS 1 Ohm Mono Car Subwoofer Amplifier
- 4000W RMS 1 Ohm Mono Car Subwoofer Amplifier.
Check StockSundown Fish Oil 1000 mg 200 Softgels
- SALT-4 4000D Monoblock 4000W RMS Amplifier.
Check StockOpto 22 SNAP-PAC-R2 - SNAP PAC R-series Rack-mounted Programmable Automation Controller, Analog/Digital/Serial I/O processing
- Rack-mounted industrial controller with I/O processor included.
- Two independent 10/100 Mbps Ethernet network interfaces.
- One RS-232 port with handshaking, suitable for modem communication using PPP.
- MicroSD card slot for removable data storage.
- Simple digital functions (no high-speed digital).
- Full-featured control and HMI software included with purchase.
Check StockSCBRHMI 4.3 Inch LCD HMI Serial Display Module with Program + Touch Screen for Equipment Control Panel STWC043WT-01 Suitable for Arduino Raspberry pi ESP 32 ESP8266 STM32
- TK8071iP Touch Screen Display HMI 7'' inch TFT 800 x 480 Touch Panel Color LCD with Ethernet Replace MT8070IH NEW.
Check StockSpree compatible replacement for Predator Generator 4000W 3200W 6.5 hp air filter set WITH SPARK PLUG,
- Predator Generator 4000W 3200W 6.5 hp air filter set WITH SPARK PLUG,.
Check Stock2) New LANZAR MAXP154D 15" 4000W Car Audio Subwoofers/Subs Power Woofers DVC
- New Lanzar MAXP15D 15" 4000W MAX PRO Car Subwoofers (Pair).
- 4000 Watt Total Power Handling (2000 Watt Each).
- Stamped Steel Basket w/Hex Key Input Terminal.
Check Stock
4000 Watt Pure Sine Wave Power Inverter 12V DC to 110V 120V Converter for Family RV Off Grid Solar System Car with Type-C Ports 4 AC Power Outlets Dual USB Ports LCD Display Wireless Remote Control
- ☀ [Advanced Pure Sine Wave] JARXIOKE inverter provides true 4000W continuous power and 8000W peak power. 12V to 110/120VAC pure sine wave technology saves more energy with high conversion efficiency (>90%) and low no-load losses..
- ☀【Easy to Control】 Easily control the on/off of the inverter within 100 meters. It is more convenient to use car and home power supply, and it is more convenient to control the inverter with light display. Monitor the actual working status (battery indicator light, sound alarm) Tips: (Before using the remote control to turn on the inverter, you must ensure that the switch of the inverter itself is off, and then use the remote control to turn on the inverter).
- ☀ [Protect your device] Perfect safety protection: overvoltage, low voltage, overload, short circuit, overheat, reverse polarity protection (fuse). Automatic restart function and GND leakage protection (lightning strike). Product liability rests with AIG..
- ☀[Extend Inverter Life] Isolated input/output design and soft-start technology, the large and durable aluminum alloy housing provides advanced anti-drop and anti-collision pr....
Check StockGCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network
- The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
- CAN industrial automation control system.
- The serial communication device is connected to CAN-bus.
Check StockDIYmalls 3.0 inch TFT LCD Display Module 3.3V Resistive Touch Screen 400x240 for Arduino UNO R3
- Nextion Enhanced NX8048K070_011C is a powerful 7.0'' HMI TFT capacitive touch display with a beautiful enlcosure, with 32MB Flash data storage space, 1024 byte EEPROM, 8192 byte RAM, and GPIO supported..
- Nextion 7 enhanced supports built-in RTC, GPIO, max 32G Micro TF/SD card (FAT32 file format).
- Micro USB 5V 2A power supply recommended..
- You need a USB to TTL adapter to plug nextion display into USB port..
- -If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock 
