Reviews High torque Screws

Avhrit Impact Wrench with 2Pcs Batteries, 650Nm/479ft-lbs Impact Wrench 1/2, Cordless Compact Impact Wrench, Brushless Impact Driver Kit for Car Tires Home

  • 【650N.m High Torque】: AH650 impact wrench equipped with a powerful brushless motor delivers 650Nm(479 ft-lbs) of maximum torque 2600rpm speed, you can loosen or tighten many kinds of screws and nuts easily in just a few seconds..
  • 【2-Pieces 4.0Ah Rechargeable Li-ion Batteries & Fast Charger】: The electric impact wrench is equipped with 21V 4000mAh large capacity lithium-Ion battery with power indicator, easy to check how much power is left. Compare with a 2.0Ah/3.0Ah battery, our 4.0Ah li-ion supports superior longer run time, and 2x 4.0Ah batteries will ensure that your impact wrench is always ready to use. Fully charged in only 2 hour with the matched Avhrit fast charger..
  • 【Two Variable Speeds】: Our brushless impact driver 1/2-inch are equipped with two speeds (0-2200RPM/0-2600RPM) in high and low modes, you can switch to the appropriate mode as needed to improve efficiency and save battery power..
  • 【Versatile Applications】: This 1/2 impact gun are specially designed to easily remove and tighten all kinds of screws and nuts without any brute force, such as removing car tires, furniture assembly, scaffolding installation, garage use, DIY project use, etc. It greatly improves the work efficiency..
  • 【Reverse Auto Stop Mode】: In reverse m....
Check Stock

PB Swiss Tools PB 8510R-100 Set Twister - 100 mm shaft

  • Includes Slotted/Flat 2-5, Phillips 1-3, Pozidriv 1-3, Hex Key 2.5-6mm, Torx (Star) T10-T30 screws..
  • The skin-friendly Santoprene handle transfers high torque onto the screws effortlessly..
  • Ergonomic ratchet handle with easy to use one-handed functions..
  • Every PB Swiss Tools product comes with an unlimited lifetime guarantee..
Check Stock

SHALL 222-Piece Pink Drill Driver and Home Tool Set, 12V Electric Drill Combo Kit, 3/8" Keyless Chuck, 12" Wide Mouth Open Tool Bag, for Drilling Wood/Metal, Women DIY Projects

  • ...e bag, 8" water pump plier, 6" slip-joint plier, 6" needle nose plier, 8" adjustable wrench, 6" mini hack saw & 5 saw blades, 8oz fiberglass claw hammer, 8" household scissor, 9" magnetic torpedo level, 10ft self-locking tape measure, 0.7" (18mm) utility knife & 10 blades, 50 cable zip ties, 5 spring clamps, 100pcs screws assortments.
  • 18+1 Clutch & 2 Variable Speeds: Max torque is 221inlb/25Nm, 25% powerful than other 12V cordless brush motor drills. Flexible, adjust the torque level for different types of project (1-4: driving small screws, 5-9: driving screws into soft material, 10-13: driving screws into hard material, 14-16: driving screws into hard wood, 17-18: driving larger screws, +1: for heavy drilling), two speeds are easy to set for driving at low speeds (0 – 350 RPM) or high speeds ( 0 – 1,350 RPM).
  • 2.0 Ah Li-ion Battery: Larger capacity compared with other 12V cordless drills’ 1.5Ah battery, offering more working time and reducing charging frequency. Battery can be fully charged within 1.5 hours and load working times is 70mins. Safe and reliable, continuously charged for 24 hours without high temperature or explosion situation.
  • 3/8” Keyless Chuck & Forward/Reserve Control: Universal, fitting most 3/8” drills with 24 UNF thread mo....
Check Stock

Senco DURASPIN DS225-18V 2\ 5000 RPM Cordless Auto-Feed Screw Driver 10A0001N

  • Drives #6 - #12 (#6 - #8 recommended) 1” to 2” length collated screws.
  • 5000 RPM high-torque brushless motor increases performance and battery life.
  • Removable feed system quickly detaches from the body to expose the bit for easy reversing of screws.
  • Patented corner-fit feed system Improves line of sight and provides better access to corners.
  • Feed-on-return drive system puts screws in-line with the bit before you drive for increased speed and consistency.
Check Stock

SEYVUM C11 Cordless Drill Set, [Compact] [Powerful Brushless Motor], 12V Electric Drill 350 In-lb Torque, Power Drill with Tool Bag, 1H Fast Charger, Lightweight, Electric Screwdriver Drill Bits(Blue)

  • ...0rpm, and the maximum torque is 350in-Lbs. Also, the brushless motor runs cooler and more efficiently for longer life. Brushless drill delivers up to 35% more runtime over brushed.
  • 350 IN-LBS & METICULOUS AND THOROUGH - An 20+1 position clutch prevents the stripping of screws and delivers 350 in-Lbs (40N.M) of max torque. Power drill's multi-position clutch will deliver precise power where you need it. When faced with a change of density in materials. Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • 2 VARIABLE SPEED ADJUSTMENT - The electric drill is designed with variable 2-speed settings (0-450 rpm and 0-1500 rpm) for multiple purposes. The drill trigger controls the speed. Being able to vary the speed makes it easier to start holes, drive screws, and drill wood, metal, plastic. The reversibility option can help reverse drills out of holes and remove screws.
  • COMPACT & LIGHTWEIGHT - The body of the drill driver is more compact, only 5.5in long from the drill bit to the end. Can work easily in tight areas. The drill weighs only 1.7 pound and is als....
Check Stock

Nightforce Optics X-Treme Duty Ultralite Compact Magmount Scope Mounting System, 1.5in, 34mm Rings, 20 MOA Taper, Black, A362

  • XTRM DUTY COMPACT MAGMOUNT - Nightforce Compact Magmount is a tough, reliable mounting system that doesn't add substantial weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
  • UNIQUE DESIGN - This scope mount features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. This unique design and construction provides the performance of steel at half the weight.
  • PRECISE TOLERANCES - Precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
  • SPECIFICATIONS - This X-Treme Duty Ultralight Compact Magmount scope mounting system is 1.5" high, fits 34mm scope tubes, and features a 20 MOA taper.
  • NOTE - Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
Check Stock

IDEAL Electrical 35-936 Torque Screwdriver Kit [7 Pieces] – 0 to 36 Lb. Adjustable Torque Screw Driver w/ Phillips, Flat, Square Bits. Driver Bit Set

  • Electrical Screwdriver: an assortment of screwdriver and driver bits, this 7-pcs. screwdriver set is commonly used by electricians and maintenance engineers to tighten cross- and slotted-head screws.
  • Durable Construction: carefully engineered with hard-wearing materials, the torque driver is immune to abrasion and wear over a prolonged usage and stays resistant to corrosion as well.
  • Adjustable Torque: the bit driver has user-settable torque from 0 to 36 lb. It can be changed using the unique torque limiting clutch which disengages once the preset torque is achieved, preventing overtightening and possible damage.
  • Protective Cap: the nut driver bit set is equipped with a protective vinyl cap which not only keeps the handle protected. but also shades the torque key slot that is used to get accurate control torque adjustments.
  • Product Specification: the 7-in-1 driver bit set comes with #1 and #2 Phillips bits, #1 and #2 Square bits, and 1/4 in. and 3/16 in. Slotted/Flat bits.
Check Stock

Car Music Drill Bass Beat (New York Drill Instrumental)

  • ✔【Powerful Torque】The electric impact wrench equipped with a brushless motor has a maximum torque of 380nm (280ft-lbs), which can help you easily unscrew all kinds of screws and nuts,including disassembly of car tires, furniture assembly, scaffolding installation, garage use, diy project use, etc. Greatly improving work efficiency..
  • ✔【2pc 21v Battery】:The battery powered wrench comes with two batteries and a compatible charger, the strong endurance can ensure you work for a long time without worrying about losing power during work. A battery can be worked for 3.5 hours in normal operation, and it only takes 2.5 hours to fully charged..
  • ✔【What You Get】:The cordless impact wrench include 1pc impact wrench,2pcs battery packs and fast charger,6pcs impact sockets (14mm/17mm/18mm/19mm/21mm/22mm),8Pcs drills and 6pcs screws,1pc driver adapter,portable strap,and tool box.An electric wrench can be used for drills, screwdrivers and other functions at the same time to meet all your needs..
  • ✔【2-Speed Control】:Cordless impact wrench'step-less variable control can be carried through the on/off switch to control th....
Check Stock

PKEY Electric Screwdriver, Cordless Screwdriver with 32 Magnetic Bits & 4 LED Lights, Torque Adjustment, Rechargeable 2000mAh Battery, Repair Tool Kit for Door Locks, Printers, Computer, Bicycle

  • ... mode to manual mode easily (electric torque: 0.25N.m~0.35N.m.
  • manual torque: 2N.m), which improves your work efficiency and saves time..
  • [Dual Mode & Magnetic Design] The mini electric screwdriver has forward and backward buttons, allowing you to tighten or loosen the screws easily. This electric screwdriver has a magnetic design in the chuck to help you install the bits quickly. The magnetizer is convenient for picking up small screws, and you can also do precision work on a magnetic worktable to prevent screw loss..
  • [55 Multipurpose Bits] The electric precision screwdriver includes 50 pcs of 28mm bits and 5 pcs of 45mm extended bits to solve the removal, installation, and repair of precision devices. With the extension rod, narrow and long screw holes can be handled easily. H4*28mm: PH(000-000-00-0-1-2) SL(1.0-1.5-2.0-2.5-3.0) T(6-7-8-9-10-15-20) (2-3-4-5) Y(0.6-1.0-2.0-2.5-3.0) H (0.7-0.9-1.3-1.5-2.0-2.5-3.0-3.5-4.0) P (2-5-6) ▲(2.0-2.3-2.5-3.0) U(2.0-2.6-3.0) S(0-1-2) H4*45mm: PH (0-2) H(2.0-2.5) SL2.5..
  • [Type-C Quick Charge] Equipped with a powerful 260mAh battery, the Mini electric screwdriver can be used for a....
Check Stock