Reviews High speed Machining Tool

Center Drill Bits Kit 1.5/2/2.5/3/4mm Center Drill Bit 5pcs High Speed Steel Center Drill Bits 60 Degree Center Drill Bit for Hole Processing

  • [Prefabricated Precise Positioning]: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • [Light Cutting and Good Chip Removal]: It has the advantages of light cutting and good chip removal.
  • When machining a center hole with a diameter of 2-10mm, this center drill is usually used.
  • [5 Center Drill Bits]: This 60 degree center drill bit has 5 center drill bits, which can be used to drill holes of different sizes.
  • [Made of High-speed Steel]: This center drill bit is made of high-speed steel, with high hardness and good wear resistance.
  • [Widely Used]: This center countersink drill bit can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

PENSON & CO. 5/8

  • Clamp a wide range of workpieces securely to the table while machining, milling or drilling.
  • Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened..
  • Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets.
  • This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine.
  • Include a variety of flange nuts, tee nuts, step blocks, coupling nuts, studs and hold down bars to fit almost any machine clamping need.Description58Pc Deluxe Steel Clamping Kit 5/8" T-Slot 1/2"-13 Stud-Size for Bridgeport Mill.
  • Compatible with all Bridgeport and Bridgeport type machines.
  • Well-organized set with each tool having it's slot.
Check Stock

uxcell 3mm Chucking Reamer, Tungsten Carbide Lathe Machine Reamer H7 4 Straight Flutes, 100mm Length Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal

  • Specifications: Cutting dia.: 3.4mm / 0.13".
  • accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Upgrade Version Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill

  • The nebulizer gas and coolant is adjustable, easy to use on different processing conditions.
  • Gas processing chips are blown away, working safer.
  • A lot of water problem solving tools, easier to clean up.
  • Widely Used - In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2..
  • Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
  • Even the super-hard alloy precision machining the workpiece can achieve a smooth surface.
Check Stock

Pneumatic Clamp 1/8\ Intake Interface High Strength Pneumatic Hold Fixture for Welding

  • The operation is simple, and it is easy to realize automatic control, and the clamping type work can be performed without using artificial force..
  • It can stably ensure the machining accuracy of the workpiece. When the workpiece is clamped with pneumatic clamps, the positional accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture, which is not affected by t.
  • It can expand the scope of use of machine tools and realize multi-function of one machine. The use of special pneumatic clamps can change the purpose of the original machine tool and expand the scope of use of the machine tool to realize multi-function o.
  • The pneumatic reaction speed is fast and the testability is high, so the test time is shortened and the production efficiency is improved in the production process..
  • It can reduce the auxiliary working hours, improve the labor productivity, and clamp the workpiece with the pneumatic clamp. The workpiece can be quickly positioned and clamped without the need of alignment, which significantly reduces the auxiliary work.
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 8pcs

  • Overall length: 95mm / 3.74". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
  • Application: Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

KEO 55705 Solid Carbide Single-End Countersink, TiALN Coated, Single Flute, 60 Degree Point Angle, Round Shank, 3/8\ Shank Diameter, 5/8\ Body Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining").
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock