Reviews High output Leds

ChargeIt by Jay Round Charger Plate, Red, 13"

  • DSP functions include: 7 PEQ bands, LPF, phase, subsonic filter, limiter, mains delay, and HPF.
  • Single-knob control panel with high-contrast LCD display and status LEDs.
  • Fast, intuitive PC-based GUI software enables full access to the DSP functions.
  • Efficient Class D output topology ensures high-impact low frequency performance.
  • Includes both balanced and unbalance line level inputs and outputs.
Check Stock

LED Candlelight Fake Fire Flames Prop Led Strip Kit for Theatrical Special Effects Battery Operated

  • Double sided 6 LEDs per side 12 LEDs total flame effects Lighting Wick Strip, LED candle flame simulation for theatrical hand held candlesticks and candelabra props, lanterns and torches. The candle flame spectrum light is well matched to true candle light spectrum giving a warm glow..
  • Static (non-flickering) continuous flame spectrum light source battery operated. Great for special effects projects needing candlelight simulation.
  • Dual voltage LED strip operates from 12V or 9V, battery holder for 8 AA cells and 9V battery clip included in kit (batteries not included). The strip is rated at 2.3 watts nominal at 12 volts DC with 46 lumens light output and 1-watt nominal at 9 volts DC with 26 lumens light output..
  • Cuttable LED strip every 2 LEDs per side for reduced wick length and reduced light output, allows usage ranging from theatrical hand candles to lantern and torch stage props..
  • This kit contains 1 LED Lighting Wick Strips, 1 pc 9-volt battery clips, 1pc 8 AA cell battery holders. Overall length of the strip and cable end to end is 24 inches nominal. The cable is terminated with a DC barrel connector of the 2.1mm x 5.5mm size..
Check Stock

OONO ATX 24/20-Pin DC Power Supply Breakout Module with 2.1A USB Port

  • 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header..
  • Stand-By and Power-ON indicator LEDs. With latching button switch to control power output ON/OFF, it also supports external latching switch control power output ON/OFF(when using an external switch, the switch state on the module must be set to OFF).
  • With USB 5V power output, can support 2.1Amp output current for Apple products..
  • High quality screw terminal block for power output. +3.3V +5V +12V can support current maximum 24 Amp(continuous output 12 Amp), -12V can support current maximum 1 Amp..
  • ABS plastic enclosure, you can use screw mount to wood board or wall, of course, can also be placed on the desktop..
Check Stock

Planet Bike Superflash Stealth Bike Tail Light

  • High output surface mounted LED plus 2 5mm LEDs provide steady & Superflash modes.
  • Run times: 60 hrs (steady – 7 lm) and up to 100 hrs (Superflash - 7 lm).
  • Rear bicycle light with eye-catching red flash pattern.
  • Offers 1/2-watt Blaze red LED and 2 eXtreme LEDs.
  • Lightweight, ultra-compact, weatherproof housing.
  • Attaches to almost any bike via bike mounts and clip mount.
Check Stock

HELLA 357106002 ValueFit 4 Square 2.0 LED Close Range Worklight , Black

  • Super bright worklight with high-quality LEDs emits bright white light into the working area.
  • The structured lenses directs the light beams in the close range area arround the vehicle amd offers a homogenous illumination and daylight conditions also by night.
  • The powder coated aluminium diecast housing enables the thermal flow and gets the heat from the LEDs to the surface of the lamp. Lower temperatures --> longer lifetime.
  • The 16 powerful LEDs generate 2000 measured lumen light output which is a perfect replacement of old Xenon worklights.
  • IP67 Rating: The worklight is 100% water and dust proof, even under extreme weather conditions. Tested according HELLA specification.
  • Dimensions: 4.3 x 5.5 x 1.9 inch, this super thin worklight is a perfect fit for installation with limited space. The lamp comes with 500mm (1.6 feet) open wires.
Check Stock

Dayton Audio SPA250DSP 250W Subwoofer Plate Amplifier with DSP

  • DSP functions include: 7 PEQ bands, LPF, phase, subsonic filter, limiter, mains delay, and HPF.
  • Single-knob control panel with high-contrast LCD display and status LEDs.
  • Fast, intuitive PC-based GUI software enables full access to the DSP functions.
  • Efficient Class D output topology ensures high-impact low frequency performance.
  • Includes both balanced and unbalance line level inputs and outputs.
Check Stock

Dayton Audio SPA500DSP 500W Subwoofer Plate Amplifier with DSP

  • DSP functions include: 7 PEQ bands, LPF, phase, subsonic filter, limiter, mains delay, and HPF.
  • Single-knob control panel with high-contrast LCD display and status LEDs.
  • Fast, intuitive PC-based GUI software enables full access to the DSP functions.
  • Efficient Class D output topology ensures high-impact low frequency performance.
  • Includes both balanced and unbalance line level inputs and outputs.
Check Stock

UpBright 12V AC/DC Adapter Compatible with Stanley Fatmax SL10LEDS SL 10 LEDs SL 10LEDS SL10LED5 5L10LED5 5L10LEDS SL10LEDSL Lithium-Ion LED Spotlight Flashlight 12VDC Power Supply Battery Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
  • UpBright New 12V Global AC / DC Adapter Compatible with Stanley Fatmax SL10LEDS SL 10 LEDS SL 10LEDS SL10LED5 5L10LED5 5L10LEDS SL10LEDSL Lithium-Ion....
  • (Come with a Smart Plug Tip pigtail for different versions for greater compatibility.).
Check Stock

Dayton Audio SPA100-D 100 Watt Class-D Subwoofer Plate Amplifier

  • DSP functions include: 7 PEQ bands, LPF, phase, subsonic filter, limiter, mains delay, and HPF.
  • Single-knob control panel with high-contrast LCD display and status LEDs.
  • Fast, intuitive PC-based GUI software enables full access to the DSP functions.
  • Efficient Class D output topology ensures high-impact low frequency performance.
  • Includes both balanced and unbalance line level inputs and outputs.
Check Stock