Reviews High Temperature Heat Shrinkable

GFORTUN Black Polyolefin Dia 50mm Shrink Ratio 2 1 Heat Shrinking Tube Tubing Wrap 1M/3.3Ft for Electric Insulation

  • Before Shrinking Dia. 50mm / 2" After Shrinking Dia: 25mm / 1".
  • Package Content : 1M x Heat Shrinkable Tube.
Check Stock

XmucTech 120 Pcs 10#, 22-16 16-14 12-10 AWG Heat Shrink Ring Wire Connector Terminals Kit, Electrical Connectors - - Automotive Marine Ring Connectors

  • You gey 120 pcs: 40pcs 16-14 AWG(Blue), 40pcs 22-16 AWG(Red), 40pcs 12-10 AWG(Yellow).
  • Suitable wire: 0.5-1.5mm²/22-16 AWG (Red), 1.5-2.5mm²/16-14 AWG (Blue), 4-6mm²/12-10 AWG (Yellew).
  • The ring terminal is made of high-quality pure copper to ensure maximum current and minimum resistance. The thick heat shrinkable tube ensures that your wires can be tightly connected, and the combination of the two ensures that your use is safe and convenient.
  • The heat-activated adhesive in the heat shrinkable tube can provide a good environment for preventing wire corrosion and waterproofing, which can be reduced to 1/3 of the original size, and the wires can be tightly combined.
  • Heat shrink connectors work for any electrical application including marine, auto, home, audio, and trailer wiring.
Check Stock

XHF 164 FT 1/4\ Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black

  • [Safety and environmental protection] XHF 2：1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [Good shrinkage performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

uxcell 20pcs Battery Wrap PVC Heat Shrink Tubing 29.5mm Flat Width for 18650 Power Supplies 5m Length Blue

  • This PVC heat shrink tube is a great items for protecting and repairing the cover..
  • Shrinking Rate: 48%(cross section)and 5%(longitudinal).
  • Insulation, stable performance and fast shrinkage..
Check Stock

XHF 164 FT 1/16' Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black

  • [Safety and environmental protection] XHF 2：1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

3PCS HT-NTC100K Thermistor Sensor for Creality Ender 3 v2 Upgrade 3x15mm 3950 Compatible with E 3D V6 Volcano PT100 Ender-3-5 Pro CR10 3D Printer

  • 【Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor】Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
  • 【Widly Compatibility】Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
  • 【High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
  • 【Long Service Life】Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..
Check Stock

12PCS 6x3/8 Tinned Copper Ring Terminal Connectors 6 AWG Heavy Duty Battery Cable Ends Bare Copper Lugs with 12 PCS 3:1 Heat Shrink Tubing for Vehicle Boat Marine Use

  • In this kit,we offer 12pcs 6awg heavy-duty lugs with a 3/8 screw size ring,corresponding matching 3:1 red and black heat shrinkable tube..
  • The ring terminal connector made of high-quality copper content of 99.95%,good electrical conductivity.The 3:1 shrink tube is well made of high quality environmental material,thick and durable..
  • The wire lugs connector can be easily crimped or soldered,the heat shrink fit solid or stranded gauge wire,heat shrink provides tight and full seal,prevents leakage of any solder..
  • The ring terminal connector application areas:military/aerospace,household appliances,lighting electronics,automotive electronics,new energy,the 3:1 adhesive-lined heat shrinkable tubing black and red,can be applied in industry,environmental protection material..
  • If you receive a defective product or have any problems with the product,please feel free to contact us,We will provide you with satisfactory service at any time..
Check Stock

5-PCS Ender 3 Thermistor HT-NTC100K 3D Printer ntc 3950 100K Thermistor Sensor for Creality Ender 3 v2 Thermistor Upgrade Compatible with E3D V6 Volcano PT100 Ender-3-5 Pro CR10 hotend,

  • （Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor (1 meter each)）：Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
  • Compatibility：Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
  • Stability and Accuracy：Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
  • Long Service Life：Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..
Check Stock

Mini Heat Gun,350W 662℉ (350℃) Dual Temp Hot Air Gun Tool for Craft Embossing,Shrink Wrapping,Stripping Paint,Vinyl Wrap,Candle Making,Sublimation,Phone Repair & DIY,Epoxy Resin,6.56 FT Long cable

  • ☆ Variable Speed & Heat：Its simple pencil-like design features dualhigh (662F/350℃) and low (392F/200℃) temperature settings with a concentration nozzle to meet the needs of a variety of projects.The heat vents of mini heat gun tail can decreased the internal high temp and extend the life.
  • ☆ Versatile Application：Small craft heat gun for resin,embossing powders,shrink wrap,vinyl wrap,decals,jewelry making,candle making,sublimation tumblers,ceramics,bubble busting.
  • ☆ Efficient and durable：Fast heating！6.56 FT Long cable！Make your work efficient and convenient.The mini heat gun made of high quality ABS plastic outside and stainless steel inside,lightweight,simple and durable.
  • ☆ Centralized Heating：The mini hot air gun is especially ideal for getting into hard-to-reach places and concentrating high heat on the tight area.Retractable bracket lets this heat shrink gun stand on the table stably and use it hands-free.
  • ☆ What You Will Get：1 x 350W mini heat gun,1 x Reflector Nozzle,1 x User Manual,40 x Heat-Shrinkable Tubes,If for any reason you're dissatisfied,contact our customer care team and we'll make things right.
Check Stock