Reviews High Temperature 3d Printer Nozzle

3D Printer Nozzle Cleaning Kit - 13 Pieces 3D Print Tools 0.4mm Pin and Tweezers with Stainless Steel Wire Brush

  • Function: 3D printer accessories is perfect for removing the blockage with high precision and is also suitable for the general maintenance of the....
  • Compatibility: These 3D printer tool kit are compatible with most popular 3D printers, fit most 3D printers nozzles.
  • Uses: 1. Before use the 3D printer cleaning kit, it is recommended to heat the nozzle to 200 degrees or above (pay attention to prevent scalding).
  • Material: High quality stainless steel, the pin tip is smooth and sharp with high strength and toughness, suitable for mild maintenance of nozzle and....
  • Package contents: you will receive 10 pieces of stainless steel nozzle cleaning pins, 1 storage box, 1 copper wire cleaning brush, 2 pieces of....
Check Stock

AMOLEN PLA 3D Printer Filament, 1.75mm, Tri Color Changing with Temperature, Pine Green to Brown to Yellow,1KG

  • ✔TEMPERATURE COLOR CHANGE - Under 30ºC it looks pine green and above that it starts getting brown, and when the temperature is above 45ºC, it starts getting yellow. Please note that this type of filaments should avoid long-time direct sunlight exposure. The longer the exposure time, the faster the color fade..
  • ✔SMOOTHLY PRINT - AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping..
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔HIGH PERFORMANCE - Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Gray - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

PLA Filament 1.75mm, Dovov 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1kg Spool

  • ...】30-40 times laser scan per second during production, ensure these PLA filaments of 1.75 mm diameter,Dimensional Accuracy +/- 0.02 mm.1kg spool (2.2lbs).
  • 【High Compatibility】The standard 1.75mm PLA printer filament is suitable for both 3D printers and 3D printing pens. pla filament recommended extrusion/nozzle temperature is 190-230 °(374°F-446°F).
  • 【No Winding & No Plugging】 Fully automated production, strict manual inspection, to ensure the PLA wire is neat and easy to feed.perfect roundness and tight diameter tolerance, does not overlap or tangle. Melt well..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Dark Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any R....
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

Comgrow 3D Printer PLA Filament 1KG 1.75mm Spool Black Color

  • 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight. Please pass one end of the filament into the fixing hole to avoid being entangled after use..
  • High quality PLA filament for your 3D printer..
  • Compatible with any 3D printer that use 1.75mm diameter filament..
  • Recommended Extrusion / Nozzle Temperature 180¡ãC - 215¡ãC..
Check Stock