Reviews High Pressure Thread Cap

Labconco 7576210 Large Serum Bottle Split Stopper, 20mm Size (Pack of 100)

  • White smooth polypropylene disc top caps/ Neck diameter 24mm with thread type 410 (24/410) with .270 Orifices.
  • Press down the indent area to expose orifice for easy dispensing/ Apply light pressure to the open end of the cap to close it.
  • The versatile cap is great for dispensing many different products from condiments to cleaning, beauty, & hair products.
Check Stock

X AUTOHAUX Residual Pressure Valve Drum Brake 10LB Residual Valve Kit Red

  • 【Function】The 10 pounds residual pressure is used to hold pressure against the springs in the drum.This allows the drum brake to engage faster and....
  • 【Size】76x19mm / 2.99"x0.75". Made of Metal. Duty Automotive Grade Chrome Retainer and Black Thermoplastic Cap.
  • 【Easy Install】Easy Install, no complicated steps and no complicated tools required..
  • 【Fitment】Fit for the end of the valve has a pipe thread that accepts the common 3/8-24 inverted flare Male Fittings..
  • 【Package Includes】1pcs residual pressure valve.
Check Stock

[2023 Upgraded] Pressure Regulator 25 PSI, 3/4" FHT × 3/4“ MHT, Pressure Reducer Low Flow Valve, Great for Drip Irrigation System (2 Pack)

  • Moistenland 25 PSI preset pressure regulators (hose thread) are used to reduce and regulate the incoming pressure of a household’s water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI..
  • High-strength ABS construction for durability, available with 3/4” female hose thread to fit all standard hose or pipe thread connections.
  • Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). It may be connected to an automated timer, backflow preventer, or filter, if desired..
  • This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA..
Check Stock

High Pressure Radiator Cap with Temperature Gauge, 1.8 Bar Radiator Cap 25.6psi Compatible with Honda, Kawasaki, Suzuki, Yamaha, Polaris Ranger, Husqvarna Dirt Bike, KTM, More Motorcycle ATV Models

  • REPLACEMENT 1.8 HIGH PRESSURE RADIATOR CAP : Accurate read out in Celsius and Fahrenheit - This high-pressure radiator cap will give you real-time temperature monitoring with accurate readings in both Celsius and Fahrenheit (32-400). It has a bright color gradient meter that provides high visibility to assist you in understanding what the temperature of your engine means, and can help prevent costly engine overheating..
  • COMPATIBLE WITH THESE VEHICLES : Honda CR125R, CRF250R, CRF250X, CRF450R, XR650R | kawasaki KLR650, KX250, KX250F, KX450, KX450F, KX65 | Suzuki DR-Z400, DR-Z400S, DR-Z400SM, RM250, RMZ250, SV650 | Yamaha Banshee 350, Rhino 450 660 700, WR400F, WR450F, YZ400F, YZ450F, YZ450Z | Polaris Ranger, Does Not Fit RZR Models | KTM 250, 300, 350, 450, 500 & more vehicles 1.8 bar high pressure radiator cap. Please check the detailed description before purchase. Thank you!.
  • REPLACES PART # : 1.8 high pressure radiator cap. This 1.8 High Pressure Radiator Cap with Temperature Gauge makes it easy to keep an eye on your machine's temperature. Our innovative design gives you the benefits of a standard radiator with temperature monitoring on your 2 or 4 strok....
Check Stock

ZZJMCH 2 Pack 37mm Center Pinch Front Lens Cap Compatible with Olympus Canon Nikon and Other Brand of Lenses with 37mm Filter Thread, Replaces Olympus LC-37B Front Lens Cap

  • Compatible with any lenses with 37mm lens thread size, Please note your camera’s lens thread size will be marked somewhere on the lens barrel, such like Olympus 14-42mm II Lens,Olympus M.Zuiko Digital ED 45mm f/1.8 Lens,Lumix G Vario 12-32mm f/3.5-5.6 ASPH. Lens,Lumix G X Vario PZ 14-42mm f/3.5-5.6 ASPH Power O.I.S. Lens,etc..
  • Replaces Olympus LC-37B front lens cap or 37mm lens cap from other brands.CHECK YOUR LENS DIAMETER BEFORE PURCHASE.Your camera’s lens thread size will usually be marked on the lens barrel /UV lens filter barrel or printed underneath your lens cap. Ø37 = 37mm lens thread size..
  • This cap protects lens front from dust, moisture, direct sunlight and scratches.and also protects from scratches during storage and walking around. Easy to use: Simply pinch the center to quickly attach to the front of your camera lens, as to the lens cap keeper, attached with the 3M adhesive pad or loop through the cap attachment hole..
  • Inlcudes 2 High quality plastic center pinch lens cap + 4 Universal elastic lens cap keeper..
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans, female thread size as shown, please measure your gas cans spout mouth size before purchasing. The new upgraded coarse threaded can spout cap reduces the height of the thread cap to ensure that the cap can be completely sealed..
  • High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coa....
Check Stock

Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs

  • High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
  • Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
  • Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
  • Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Check Stock

Sanoolir 4500 PSI HP Version with 800 Output Pressure，Paintball Air Tank Regulator & Valve Guage

  • Max up to 4500psi high pressure gauge input, 800psi regulated output.Comes with Plastic Thread Cap..
  • Fits most of air tanks with inlet threads 5/8″-18UNF, the outlet threads size is G1/2-14NGO..
  • Premium quality regulator comes with a 3k and 5k burst disk.
  • Comes with standard 8mm quick disconnect male foster fitting adapter for filling..
  • The regulator is high air flow rate, light weight, easily operation and re-buildable, applicable medium with Air/CO2..
Check Stock

ChromLives Camera 52mm Lens Cap Center Pinch with Lens Cap Leash Hole Bundle Compatible with DSLR Cameras Nikon Sony Canon & Other DSLR Cameras UV Lens 52mm

  • The ChromLives camera lens cap is a great photography rig to protect the front portions of your camera camcorder lens from water, dust, and scratches..
  • 52MM LENS CAP- This is 52mm lens cap with lens cap leash Hole for ALL Lenses with a 52mm Filter Thread Front manual or autofocus, digital or film.Also attaches to filters, adapters, and lenses with or without hoods. CHECK YOUR LENS DIAMETER BEFORE PURCHASE. Your camera's lens thread size will usually be marked on the lens barrel /UV lens filter barrel or printed underneath your lens cap. Ø52 = 52mm lens thread size..
  • LENS CAP LEASH HOLE- A hole on lens cap for lens cap leash to prevent losses while still keeps the lens 100% sealed when mounted..
  • PINCH DESIGN- Easy to use. Center pinch design allows easy attachment and removal, even with a lens hood in place..
  • Made of high impact plastic for extra durability. Package includes 1*52mm Lens cap,1* Lens cap keeper line.（Please measure your camera len size before order.）.
Check Stock