Reviews High Power Laser

ATOMSTACK M50 50W Double Ultra-Fine Compressed Spot Laser Module W/Gyroscope 10W Optical Power Fixed-Focus Laser Engraving Speed Higher for Laser Cutting Engraving Machine CNC DIY Laser

  • 【Ultra-fine Compression Laser】0.08*0.15mm double compression spot light coupling technology makes engraving more powerful and precise..
  • 【Higher laser power, faster engraving speed】 The laser power is 10W, an upgraded version of high-quality fixed-focus laser, without focusing. The....
  • 【New Eye Protection Design】Laser protective cover: The laser is equipped with a protective cover to protect the eyes of the user without the need....
  • 【Easy to Use】The laser has a built-in horizontal gyroscope anti-tip protection device, and it stops working when the tilt angle is 20°..
  • 【Wide compatibility】It can be used for laser cutting machine, laser engraving machine, CNC, DIY laser. M50 is only suitable for 12V voltage. If it....
Check Stock

HILDA 4x360°Laser Level Self Leveling with Alarm,16 Lines Green Line Laser,2x360° Vertical and 2x360° Horizontal laser tool, Rechargeable Li-ion battery,Level tool for Indoor and Outdoor Construction

  • ...is easier to be found than the red line.In addition,HILDA green laser level has 10 grades about the thickness of line,you could choose it all by yourself.Finally,the green lines provide a working distance of up to 100 feet and meets indoor and outdoor projects totally..
  • 【Self Leveling & Manual Mode】①Switch the Power ON / OFF button，it's on the self leveling mode.This laser level can be tilted self-leveling within± 4°,the alarm will be activated If this range is exceeded.And the alarm wouldn't be turned off until we put it in a level place.②Press the power button “OUT”on the top for 3s to turn on the manual mode,then you could use it in any angle without alarm.Tip: the manual is in the packaging gap..
  • 【Power Methods & Type-C Port】The HILDA laser level has two charging ways.①When you need to work for a long time but the laser has run out of power, you could buy 2 backup batteries(This model could be easily found).Take out the exhausted batteries and charge them independently，then put the backup batteries in to continue working. It makes your work more efficient.②You can use type C to connect the level to the power supply and charge directly..
  • 【Waterproof＆Remote Control】The IP54 waterproof design to protect the level from wa....
Check Stock

Higoo Tactical Red Laser Dot Sight Scope + Powerful 500 Lumen LED Flashlight with 20mm Picatinny Rail Mount Combo for Rifle Shotgun

  • Compact 500 lumen Tactical Pistol Flashlight, very bright at 40 to 50 yards.
  • The Flashlight has 3 modes: Normal brightness, High brightness, Strobe..
  • The red laser has 20mm rail on its top and 20mm rail mount on its buttom, very easy to mount on weapon and get other optics be mounted on it..
  • The flashlight power by 1x CR2 power source(Included), the red laser power by 2 x LR44 power source(Include).
Check Stock

LE400PRO Laser Engraver, 50W High Accuracy Laser Engraving Machine with 400x400mm Large Working Area, 5.5-6W Laser Power Engraver and Cutter for Wood, Metal, Acrylic, Leather

  • ... 97%. The laser protective cover adopts a humanized magnetic design, which makes the assembly easier and more convenient..
  • : The focal length of the laser is a fixed value, no need to adjust the focus before engraving which traditional zoom lasers can not do! And the laser power of the fixed-focus laser is more stable. What's more, the design of using the knob to control the lifting of the device makes focusing more convenient and accurate..
  • : Full aluminum alloy modular can typically be assembled in 20 minutes. The structure makes the machine more solid, and improves the accuracy of engraving. Also equipped with a convenient power switch for easy power off at any time..
  • : The laser engraving machine can be compatible with LaserGRBL, LightBurn. LaserGRBL (free software) supports Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11. LightBurn (paid software) supports Windows, Mac OS. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc. In addition, we have a professional US technical team and support website to solve all your problems 7*24 hours..
Check Stock

Newlife Mobility New! Powerful 3x808nm+12x650nm, Cold Laser Vet Device:Home Therapy, to Heal and Reduce Pains Inflammation in HUMAN,Dogs,Cats,Horses , any Animals, power 510mw, 5200mah (White)

  • As power is big (1055wM), we suggest to use it 10mins/time, 2–3times/day (saving time than Others) .Newest! Laser Vet Device for Pets: A Home Laser Therapy, Accelerates Healing and Reduces Pain and Inflammation in Dogs, Cats, Horses and Other Animals , 3*808nm +12*650nm, As power is too big, so we suggest to use it 10mins/day, 2–3times/day. saving 2/3 time than other devices (others using 30mins/time) Best Choice,Laser of 808nm is specially be effective for pain..
  • NO drugs, laser therapy device for pain relief, Best Choice: Three 3*808nm +12*650nm, Long time battery 5200 mAh, portable, easy operate. Laser Therapy kit including 1 laser therapy, 1 protect-glasses, 1gift box, 1 charger and instructions.
  • Three CENTRAL 808NM LASER DIODES ARE INVISIBLE. Its not that red and smaller than 650nm lasers around them. Because the 808 nm laser is a very weak beam, it is not as bright as the 650 nm laser, so the naked eye is difficult to observe clearly. So you probably don’t think it’s activated yet, actually it’s already working. Total Physical Therapy: The low level laser therapy technology is totally physical, , non-invasive and no any side-effect. Far More Effective Than Others..
  • SAFE healing Cold Laser wavelengths. The cold Laser is effective for heal....
Check Stock

ANNCED 9MM Bore Sight Cal Laser Sight Red Dot Boresighter with Three Sets of Batteries (9MM)

  • FITS VARIOUS GUN TYPES: This red dot laser boresighter is made for sighting your rifles, shotguns, and handguns without having to fire a single shot. You can even dial in your sights indoors..
  • CALIBER ADAPTERS: Simply choose the correct caliber adapter and place the laser unit in the muzzle to fit a wide range of firearms from .22 to .50 caliber..
  • PRECISE ACCURACY: The sight will emit a perfectly straight red laser beam, providing a precise reference for zeroing in on your target..
  • MUZZLE SAFEGUARD: Unlike most in-muzzle boresighters, this unit remains protruded from the firearm barrel to prevent accidents. Use after your gun cleaning kit for best maintenance practices..
  • HIGH POWER LASER LIGHT: Class IIIa laser beam for high visibility with maximum power output less than 5mW. For affordable quality gun tools and tactical accessories, always choose Pinty..
Check Stock

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
  • Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
  • Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
  • This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
  • Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..
Check Stock

ACTIONUNIOn Airsoft PEQ-15 Pro UHP Visible Green Laser + Visible Red Laser + White LED Flashlight (Tan)

  • PEQ-15 Pro special version for airsoft fans who are without NVG, this item is a visible UHP green laser+red laser+ white LED flashlight combo.
  • Use a brighter UHP green laser instead of the IR laser that needs to work under NVG. The upgraded appearance of the aluminum extended electric box and the upgraded UHP silicon power button for the engraving version make the PEQ-15 Pro looks more tactical and exquisite.
  • The UHP visible green laser is super bright, can even be used outdoors at noon. The visible red laser is designed for indoor activities to prevent halos on the target.
  • PEQ lasers are both adjustable to hold zero, laser output power less than 5mW, Class IIIA.
  • LED flashlight brightness up to 270 lumens.
  • Made of high-strength nylon plastic material, fits standard 20 mm Picatinny rails.
  • Comes with a pressure switch, runs with 2pcs cr123a batteries or 2pcs 16340 batteries (NOT INCLUDE BATTERY).
Check Stock

Twotrees TT-2.5W Laser Engraver,Input Power 7500 mW Engraving Machine, 60% Pre-Assembled,DIY Laser Marking,CNC Laser Engraver Kit Laser Engraving Cutting Machine,Working Size:300x400mm(2.5W Laser)

  • 2500mW high intensity laser head, 7.5W Output Power, can engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper,etcre motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【60% Pre-installed】Fast assembly, save more time. Open structure motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
  • 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn)..
  • The driver and nano on the motherboard are detachable, can be replaced by other chips or modules.Easy to assemble design,It only connect it to the computer, you can print any pictures your like..
  • Package includes: 1pcs Laser Engraver DIY Kit Parts ,1pcs Power supply, 1pcs USB cable ,1pcs Safety glasses..
Check Stock