Reviews High Current Power Inductors

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
129 square inches of sound radiating surface on both the front and back.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-300 watts per channel.
Dimensions: 52.1" high, 9" wide, 16.3" deep.

【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
【Feature】 this Choke Inductor Has Special Guide Pin Structure.
Not easy to produce open circuit phenomenon..
【Specification】 1uh to 220uh 1MH to 20MH.
The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.

Small vertical inductors occupy less space..
The inductor coil is protected with PVC or UL tube to ensure stable performance.
This choke inductor has special guide pin structure.
Not easy to produce open circuit phenomenon.
The choke coil inductors are of small distributed capacitance and high self-resonance frequency.
Include：10uh, 1uh, 33uh, 2.7mh, 100uh, 4.7uh, 150uh, 10mh, 1mh, 220uh, 15uh, 20mh 15model, Packed in A plastic storage case.

... JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Dr....

★ SWITCH POWER SUPPLY: Input:110V/220V ±1% （100-140V,180-260V）.
★ RAW MATERRIALS: Pure copper inductors, dual-capacity electrolytic capacitors, guarantee of high-quality power supply.
★ WIDELY USE: Wide input voltage range, steady and precise output voltage. Great for Industrial automation, LED display, Communications , Computer Project, home appliance etc..
★ PROTECTION: Shortage Protection, Overload Protection, Over-voltage Protection of 115%-135%, Action output cut-off Reset:Auto Reset or fuse..

It integrates high performance IRS2092 supporting dual channel audio amplification. Both of channels.
Both of channels are capable of outputting nominal power simultaneously and continuously. It’s suitable for amplifier enthusiasts or hobbyists to finish a complete amplifier system..
high performance inductors are used to gain the perfect timber, finally realize high S/N ratio, low THD+N, wide frequency response range etc..
Applications: Home theater receiver Car audio Background music systems Musical instrument amplifiers Prototype for recording studios, Post-production, Live sound and Hi-Fi applications PA system.

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.

Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
sleep easy at night knowing your 4ch car audio amplifier is protected.
Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4ch car amplifier delivers the power you need to destroy the competition in the SPL lanes.
LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the amplifier for car speakers runs cool for even the most demanding playlists.
4 channel amplifier car audio rated 75W @ 4-ohm x 4-ch (14.4v).