Reviews High Capacity Force Tester

AUTOOL Power Circuit Probe Kit 6-24V Automotive Circuit Tester with Auto Electrical System Testing Functions (Digital Voltage Tester/Multimeter/Short Finder/Battery Tester/Power or Ground Supply)

  • 【Why Need It】The circuit breaker finder is mainly used to test the on-off condition of the automobile electrical system under the 6-24v DC voltage. When the fuse is blown due to a short circuit, using this circuit tester can help you quickly and accurately find the faulty wire and its fault point..
  • 【Multi Functional】Automotive electric system is test for continuity. Test for polarity of a voltage. Check switches, relays and the on-off of diodes, fuses and circuits . Test for polarity of electric cables and plugs. Track and locate short circuits. Test for bad ground contacts.Do not use on AC voltage..
  • 【Easy To Use】The power circuit probe can be used to test and activate components in or out of the vehicle electrical system. Press button to “Positive”side with LED lighting RED. Conact the probe tip to positive terminal of tested component to active the component. If LED turns to GREEN with buzzer, stop testing and check the component if defective or not, or rating current of component is higher than that of this tester..
  • 【Widely Applicable】The car circuit tester is suitable for the diagnosis of all 6V to 24V automotive electrical systems and can work well on cars, trucks, boats, trailers, motorcycles, and airplanes. The portable and er....
Check Stock

LeTkingok EBC-A40L Large Current Lithium Battery Charge Dischage Capacity Tester, 5V 40A Fe Battery Cyclic Tester (EBC-A40L)

  • EBC-A40L is a high-current battery charge and discharge capacity tester for 5V battery and performance testing, through the online software with more extensions..
  • The EBC-A40L tester is designed to charge and discharge batteries within 5V at a large current,the maximum current it supports is 40A in charging and 40A in discharging..
  • Connecting pattern: Testing connector and PC connection(The EBC-A40L tester can connect with a computer through a designated USB-TTL cable).
  • Setting examples: Discharge setting (discharge the Lithium battery from 3.7V to 2.8V at 5A).
  • Charge setting (charge the Lithium battery from 3.7V to 4.2V at 2.5A, cut-off current is 0.11A).
  • Setting examples: Auto test setting (charge the 3.7V Lithium battery at 2.5A and discharge it at 5A, waiting time is 5 minutes).
Check Stock

D-FantiX Digital Battery Tester for AAA AA C D 9V 1.5V Household Battery Checker Tester for Small Batteries Button Cell Model BT-168D

  • SMALL & PORTABLE - Simple but effective small aa aaa battery tester checker(BT-168D), compact size and lightweight,easy to carry.
  • TESTING DEFFERENT BATTERY TYPES - The battery checker tester works with standard and rechargeable household batteries. Battery tester for AA, AAA, C,....
  • REQUIRE NO BATTERY TO OPERATE - Easy-to-read , digit indicates power level. No batteries required.It is activated by the battery being checked.
  • PERFECT FOR HOME USE - Great small tool can tell you if your battery is good, low, or needs to be replaced.A must buy for anyone who uses regular or....
  • SAVE BATTERIES - You can simply test battery voltage to determine whether the capacity of the battery is low or high. It won't directly detect the....
Check Stock

KONNWEI KW208 12V Car Battery Tester 100-2000 CCA Load Tester Automotive Alternator Tester Digital Auto Battery Analyzer Charging Cranking System Tester for Car Truck Marine Motorcycle SUV Boat

  • ...lp you know their status in advance before it dies. KW208 battery tester support cranking and charging system test also alternator and starter test..
  • 【Display Overall Batteries Data】KW208 12V Battery Load Tester gives you the basic battery parameters such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. Additionally, battery cca tester will also show you professional advice whether to replace or charge the battery..
  • 【 >99.5% Accuracy】Thanks to KW208’s powerful and smart chip, it provides more than 99.5% precise testing reports within milliseconds(testing results refer to US Midtronics), greatly improved the testing speed compared to other battery testers..
  • 【Plug and Play】 KW208 Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and ready to test and analyze battery. It’s that easy!.
  • 【Starter& Alternator Tester】KW208 not only a great battery load tester that tests batteries cranking & charging system but also can test alternator's charging and starter's cranking conditions. And it can switch up to 8 languages for different needs..
Check Stock

OTDR Tester 1310/1550nm 22/20dB 60km Multi-Function Fiber Optic Tester Tool with OTDR VFL OPM and OLS Functions with SC FC ST LC Adaptors

  • High Precision 4 in 1 Smart Single Mode OTDR Tester -- OTDR: 0-60KM.
  • OLS: 1310/1550nm. Dead Zone of Reflection Event: 2m.....
  • User-friendly UI and 4-inch Touch Screen Design – this OTDR tester adopts One Key Operation concept with user-friendly UI design, together with....
  • Large Battery Capacity -- 7.4v Li-ion Battery 4,400mAh, around 5,000 times of measurements, ensures long working time and suitable for long time field....
  • Test Data Processing -- you can upload data to PC via USB port, further analysis or processing can be done via management software. Or you can save it....
  • Wider Application – with SC FC ST LC adaptors provided in the packing, this OTDR tester is suitable for engineer construction and maintenance fault....
Check Stock

MZD8391 Analogue Battery Tester, Battery Checker for AA AAA C D 9V 1.5V Button Cell Household Batteries (No Battery Required for Operation)

  • Multi Purpose Use - can be used to test different type of household batteries like AA, AAA, C, D, 1.5V,9V and button type.
  • Require on Battery - activated by the battery being checked, no battery needed for operation.
  • Simple but Effective - compact size and lightweight, portable effective battery tester, a must buy for anyone who uses regular or rechargeable batteries on a regular basis.
  • Easy to Use - identify battery status simply by the analog display needle, "good" (green), "low" (yellow), and "replace/recharge" (red).
  • NOTE : 1. You can simply test battery voltage to determine whether the capacity of the battery is low or high. It won't directly detect the battery capacity precisely 2. Don't forget: The Battery Tester is activated by the battery being checked. Keep test times as short as possible to avoid unnecessary battery drain..
Check Stock

Ultrasonic Fuel Injector Cleaner Machine & Fuel Tester 4 Cylinders 110V, CATUDIY Fuel Injector Cleaner Tool for Diesel Fuel System Cleaner Diagnostic Tester for Motorcycle Automotive Gasoline Test Kit

  • ...tects the fuel injectors of various automobiles and motorcycles.
  • 【Heated & Reusable & Effective】The fuel injector tester improves a lot of cleaning effect by heating reusable and recyclable cleaning fluid, which is money saving and eco-friendly. With 1.3L large capacity ultra cleaning tank, to perform ultrasonic cleaning on single / multiple injectors simultaneously, the auto cleaner can eliminate thoroughly blockages on the injector accessories and internal parts.
  • 【Portable & Humanized Design】The mini ultrasonic cleaner only weighs 8kg, easy to carry. Equipped with LED display, pressure gauge, glass tubes, testing liquid level gauge and multifunctional control panel, the injector pulse tester allows easy operation through its clear menu, and real-time monitoring of fuel injector detection and fuel dynamic value.
  • 【Wide Application】The diagnostic tester for vehicles supports cleaning most of petrol cars and motorcycles injectors and diesel injector in the market, but testing not for diesel injector. Applicable voltage 110V or 220V.
Check Stock

Hand Dynamometer Grip Strength Trainer - Electronic Hand Grip Strength Tester Grip Strengthener Hand Exerciser Meter Digital Hand Physical Therapy Equipment Training Gauge 265 Lbs / 120 Kgs Measurement for Sport Home School Clinic Use

  • 【Accurate and Precise measurement of Grip Strength from 0 to 265lbs(120kgs)】-【Higher capacity】-Equipped with high precision strain gauge sensor, the hand dynamometer gives you accurate momentary digital reading of gripping power. Measuring Capacity: 265lbs / 120kgs.
  • Division: 0.2lbs / 0.1kgs This is a perfect Hand Dynamometer for physical therapists, occupational therapists, athletic trainers, chiropractors, and general practitioners..
  • 【Efficient Device and Easy to Use】-The display on the handle is simple to read, and the design of this Grip Strength Tester is lightweight. The length of the handles can be adjusted to accommodate different size hands. This Grip Strength Trainer Meter is so much more convenient than the old school manual ones that are hard to read and uncomfortable to use..
  • 【Sturdy and Long-lasting】This Hand Dynamometer is made of high quality materials, which makes it sturdy and long-lasting. If you have been working on improving things with some pull up bars and pulley based exercises, This grip gauge is an excellent metric to use for determining improvement..
Check Stock

Digital Battery Tester Battery Load Tester Li-ion Battery Charge Capacity Tester LCD Battery Charger Checker Analyzer Tester Battery Capacity Performance Tester Device Mobile Power Head Test

  • 【BATTERY CAPACITY TESTER】EBC-A10H is an electronic load with charging function. It is suitable for charging and discharging capacitance test of various batteries, mobile power discharge test, charging head power performance test, support for connecting to computers, and more extended functions through online software..
  • 【AUTOMATIC CHARGING & DISCHERGE】Charging method is standard charging, support nickel hydrogen, nickel chromium, lithium, iron lithium, lead acid. Support automatic charging - discharge - charging mode for testing battery capacity. LCD display: voltage, current, capacity, time, power, energy test data..
  • 【VOLTAGE & CURRENT & CAPACITY TEST】Voltage test: 0.002V-4.5V (low voltage), accuracy is 0.003V, error ± 0.5%.
  • 4.5V-30V (high voltage), accuracy to 0.01V, error ± 0.5%. Current test: 0.05-10.000A, accuracy 0.005A, error ±0.5%. Capacity test: 10Ah, resolution is 0.001Ah.
  • Above 100Ah, resolution 0.1Ah. (Connection method: four-wire detection, separate wiring of voltage and current channels to ensure measurement accuracy.).
  • 【COMPUTER ONLINE】dedicated USB to TTL serial port (Mini USB interface, non-ordinary USB cable) computer control, curve drawing, calibration benchmark test, firmware upgrad....
Check Stock