Reviews Hi Load Coil Nails

Hotop 3600 Count Siding Nails, 15-Degree Wire Collated Coil Stainless Steel Ring Shank Nails, Full Round Head Hot-Dipped Galvanized Siding Nailer Attachment Replacement Parts (2 Inch)

  • Package includes: you will get 12 rolls of siding nails, each roll is 300 count, 3600 count in total, enough quantity to meet your daily use and replacement.
  • Size details: each count of the wire coil nail is 1 1/4 x 0.09 inch, suitable for most of 15-degree coil siding and fencing nailers, such as for model NV65AH2, NV65AH2M, PCN65, HBCN65P, 13365HHPT, C6R90BDG.
  • Corrosion protection: these wire collated siding nails are made of fiber cement material with hot dipped galvanized, which offer good corrosion protection in pressure treated lumber.
  • Structural features: these steel siding nails are designed in full round head and ring shank, nice for rough nailing of lathing and sheathing materials.
  • Replacement part: ring shank nails do well with power siding nailer and have large quantity.
  • Nailer attachments would be favorable choice to match your replacement needs.
  • Please check the parameter of your coil nailer before ordering.
Check Stock

Eagleggo Parts EP 876-174 Aftermarket Piston O-Ring for Hitachi NV45AB2, N5008AC, NT65A2, NT50A Nailers, Hitachi Replaces Part 876-174, 876174 Piston O-Rings - 10pcs/Pack

  • COMPATIBLE WITH: Fits Hitachi 876-174, 876174 Piston O-Rings..
  • This 876-174 o-ring is compatible with Hitachi N5010A, N5008AC / AC2 / ACP, NV45AB2, NT65A2, NT50A Nailers.
  • COMPATIBLE WITH: Fits Hitachi NT65A3 16-Gauge Finish Nailer NV45AB2 Side Load Coil Roofing Nailer NV45AB2(S) Bottom Load Coil Roofing Nailer NV45AE 1-3/4" Side Load Coil Roofing Nailer NV50A1 Light-Duty Coil Utility Nailer NV50AA Light-Duty Coil Utility Nailer N5008ACP 7/16" 1" - 2" x 16 Gauge Standard Crown Stapler N5010A 1/2" Standard Crown Stapler N5021A 15/16" Wide Crown Stapler N5024A 1" Wide Crown Stapler.
  • COMPATIBLE WITH: Fits Hitachi NV50AP2 Full Round Head, Coil, Wire Collation Pasti-Tacker Plus N3824A .5"-1.5" Wide Crown Stapler 16Ga N5008A1 Stapler N5008AC 2" 16Ga 1"-2"Standard Crown Construction Stapler NH451 "T" Nailer NT50A 18Ga Brad Nailer NT65A 16 Gage Brad Nailer NT65A2 2-1/2" 16Ga Finish Nailer NV45AA Heavy Duty Coil Nailer NV45AB 1-3/4" Heavy Duty, Roofing Coil Nailer VH501 Nailer N5008AC2 Stapler N5024A2 Stapler.
Check Stock

Hotop 3600 Count Siding Nails, 15-Degree Wire Collated Coil Stainless Steel Ring Shank Nails, Full Round Head Hot-Dipped Galvanized Siding Nailer Attachment Replacement Parts (1 1/2 Inch)

  • Package includes: you will get 12 rolls of siding nails, each roll is 300 count, 3600 count in total, enough quantity to meet your daily use and replacement.
  • Size details: each count of the wire coil nail is 1 1/2 x 0.09 inch, suitable for most of 15-degree coil siding and fencing nailers, such as for model NV65AH2, NV65AH2M, PCN65, HBCN65P, 13365HHPT, C6R90BDG.
  • Corrosion protection: these wire collated siding nails are made of fiber cement material with hot dipped galvanized, which offer good corrosion protection in pressure treated lumber.
  • Structural features: these steel siding nails are designed in full round head and ring shank, nice for rough nailing of lathing and sheathing materials.
  • Replacement part: ring shank nails do well with power siding nailer and have large quantity.
  • Nailer attachments would be favorable choice to match your replacement needs.
  • Please check the parameter of your coil nailer before ordering.
Check Stock

Coleman - 40 Amp 1 Pole 24v Coil Replacement Contactor C140A

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated....
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check Stock

MAX USA CORP Superframer CN890F2 Framing Coil Nailer up to 3-1/2"

  • Construction Applications: Designed for siding, cedar shingles, roof and wall sheathing, and wood fencing projects.
  • Compatible Nails: 15 degree plastic collated coil siding nails from 1-1/4" – 2-1/2", and 15 degree wire collated coil siding nails from 1-3/4" – 2-1/2" (0.09" – 0.113" diameter).
  • Built to Last: One piece hardened steel drive blade and anodized aluminum cylinder result in a durable pneumatic tool resistant to damage.
  • Contact Actuation Firing: Capable of bump firing for speed or single sequential firing for precision.
  • Fire Lock: Prevents accidental firing for safety when not being used.
Check Stock

New BackFire Dual Universal Automotive Exhaust Flame Thrower Fire Throwing Kit Muffler

  • Kits include street-strip 4-pin module and coil combination.
  • Custom Flame-Thrower coil cover, adjustable vacuum advance canister, hi-performance advance kit.
  • Wire harness and capacitor, and complete installation hardware.
  • Race Only tune-up kits include matching coil and module, wiring harness, vacuum lock out, advance weights, springs, bushings, cap, rotor, dust shield, and necessary hardware.
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • ...steel truss head screws (#10, 1/2") for immediate installation.
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”).
Check Stock

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

  • ... 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 200mm (7.87”) and thickness 5mm (0.2”)..
Check Stock

Set of 2 Terrafirma Front Coil Spring Spacers TF516 for Defender 90 Discovery and Range Rover Classic

  • Made from the highest quality steel, formed on accurate computer controlled mandrels, and precisely heat treated to ensure consistent manufacture..
  • Shot peened to relieve stress and scragged to ensure long spring life and prevent sag and are powder coated silver for long-lasting good looks..
  • Includes one (1) pair of TF015 heavy load front coil springs and one (1) pair of TF027V heavy load rear coil springs..
  • Replace Land Rover OE parts NRC4306 and ANR3477.
  • and fits the Defender 90 (1994 - 1997), Discovery 1 (1994 - 1999), and Range Rover Classic (1987 -....
  • Note: Heavy load coil springs are designed to provide 2 inches front lift on vehicles with 100kg of additional equipment and 2 inches of rear lift....
Check Stock