Reviews Hf Antenna

Balun One Nine v2 - Small Low-Cost 9 1 1 9 Balun with Input Protection & Enclosure for HF & Shortwave Great for Software Defined Radio RTL-SDR & SDRPlay Ham It Up and Other Capable Radios

Very small 9:1 balun meant for attaching long wire and dipole HF antennas to your HF capable SDR, radio or Ham It Up upconverter.
Assembled into a custom aluminum enclosure and includes 3 antenna connector adapters and a male SMA to male SMA barrel connector.
At 38mm x 25.0mm in total size, this balun is a bit larger than our popular Balun One Nine v1, but also has better HF performance and can be used to....
Very low insertion loss with a maximum input power of +24dBm. Designed primarily for HF amateur bands, but specifications are accurate to frequencies....

【MX72 Antenna Duplexer,】The MX72N duplexer is a series of inductance coils and capacitors that acts as a band-pass filter.Used in different frequency, can not transmit at the same time.The MX72N duplexer can be used in two different ways..
【HF-VHF/UHF Transceiver Duplexer】Combines the output of the HF/VHF transceiver and the output of the UHF transceiver so that both transceivers can be connected to the same antenna..
【Function】:Can also be used to separate UHF/VHF transmissions from UHF transmissions so that one transceiver can be connected to two antennas..
【Note】:The MX72 VHF+UHF Duplexer is designed for indoor use.If you use the MX72 VHF+UHF Duplexer outdoors, it should only be used for short periods of time under good weather conditions. Do not use the MX72 VHF+UHF Duplexer outdoors when there is any kind of precipitation..
【Quality Assurance】: As a professional seller, we offer high quality products and thoughtful services. Each product must be strictly inspected to ensure reliable quality. Please rest assured to buy our products, I hope you have a pleasant shopping experience..

Affordable HF, The Xiegu G90 gives you HF contact making capability at a fraction of the cost of other similar rigs..
Up to 20w of transmitting power on frequency Ranges of 0.5-30MHz, plus 60 meters SSB/CW/AM.
FREE BridgeCom University Course ($97 Value) Included setup and user course to get you, on the air, step by step, in minutes..
1.8 inch Bright and colorful waterfall display that is easy to see and read, so you don't have to strain to see what you are doing..
Built in antenna tuner so you save money and can make contacts easier and with less hassle..

Detailed build instructions available at www.K6ARK.com.
Can be used with HF bands from 160 m to 10 m.
Build as a 49:1 Unun, 9:1 Unun, or 1:1 Balun – just add wire to complete your antenna.
SMA Male connector for attachment directly to the (tr)uSDX or others with SMA connector.

The mount is a "trunk lid" mount with 13'/about 4m RG-58 cable..
The flange to the left hooks under the lid of a vehicle trunk..
Stainless steel brackets and corrosion resistance hardware.
Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna. Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz) or TC-HC152U (400-470Mhz), easy install and match perfectly.
This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..

Antenna Mounting Base: International standard NMO Mount connector,Suitable for CB/HF/VHF/UHF NMO antennas.
[4M(13ft) RG58 Coaxial Cable] NMO TO PL-259(UHF male) Plug RG58 Coaxial Cable,Suitable for mobile radio with SO239(UHF Female) Connector.You can also....
[Stainless Steel L-Bracket]L-Bracket makes the antenna mount to be better anchored to the surface hosting the mount,Easy to install..
NMO TO PL259 CABLE Work for Motorola Yaesu Kenwood Icom Vertex Blackbox HYT Hyte mobile radio..
Packing include: 1*Fix Bracket Lip Antenna Mount with 13Ft RG-58 Coax Cable.

The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation..
L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting..
Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz,B077HRNLHZ), TC-HC152U (400-470Mhz, B077HXNJ1F ) or HYS SDN1(144/430Mhz, B07P71M8M5), easy install and match perfectly..
Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna..
This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..

This item is 100KHz-1.7GHz full band UV HF RTL-SDR USB Tuner Receiver.
You can use the SDR software receives electromagnetic waves 100KHz-1.7GHz,support AM,FM(NFM,WFM),CW,DSB,LSB,USB demodulation..
Listen to HF SSB communication,FM radio,walkie-talkie call,aviation bands and the like..
There are supporting a U/V antenna,1pc 3m cable,1pc USB cable..
Package included:1pcs*100KHz-1.7GHz RTL-SDR USB Tuner Receiver.

I'm Radio-Active Funny Ham Radio Design With Tower Antenna.
Are you a ham radio operator? Love all of amateur radio - a good ragchew, CW, QRP, DX / DXing, contests, HF / VHF/ UHF or other frequency, digital radio and digital modes? Have your own rig, maybe even a nice tower or antenna? Great ham radio gift!.
Lightweight, Classic fit, Double-needle sleeve and bottom hem.