Reviews Hex To Square Shaft Adapter

Klein Tools 70220 Impact Driver Reversible Driver Set Includes 3/8-Inch Square Drive Adapter and Four Hex Bits

Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws, and easily reverses for tightening or loosening screws.
Includes 3/8-Inch (10 mm)-square-drive fitting adapter for 5/16-Inch hex bits and four assorted hex screwdriver bits (5/16-Inch (8 mm) and 1/2-Inch....
Can also be used on 3/8-Inch (10 mm) square-drive impact sockets.
Internal, spring-loaded, helical design transforms the impact of a hammer blow to up to 200 foot-pounds of shock torque.

ACCURACY: +/- 2 inch/pounds up to 40 inch/pounds.
40 – 65 is +/- 5%. The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inches.
EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.
RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds.
DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”.
INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage case.
LONGTERM USE: Always return to the lowest inch/pound setting after use.
GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.

Pass-thru socket and ratchet system eliminates the need for deep sockets.
Fits 6 fastener types: Hex, Square, 12 pt., E-Torx, Rounded Hex, and Spline.
Up to 40% stronger than standard ratchets.
5° ratcheting swing arc provides turns restricted fasteners.
Up to 50% thinner than standard ratchets to give you greater access.
Included adapter converts X6 box end for traditional square drive sockets.
Pass-Thru system works over any length threaded rod, where normal ratchets and sockets won’t fit.
Laser-etched sizing makes identifying the correct tool quick and easy.

【Ice Auger Adapter and Extension】Hex head shaft Ice Auger Adapter fit in 1/2 inch drill chuck for Power Drill and adjustable in three different heights, about 14 inches in length. 0.79 inch inner Round Shaft black extension fit to Gas Powered Earth Auger , 12.6 inches in length. The Extension and adapter convert most hand ice augers to automatic mode, saving your fishing time..
【High-Performance Drilling】8'' auger diameter, about 20'' drilling depth(without Extension length ), weight 5.4 lbs. Quietly, lite weight and easy to use. Comes with spare blades, Dual flat steel blades offer smooth cutting and breakthrough. Drills fast and with the center point it can overlap holes and helps keep the bit stable when starting..
【High Quality】The Ice Auger, Auger extension and Ice fishing Auger Drill Adapter were all forged from heavy duty, welded steel and finished with a powder coat for Long-lasting use without rusting or damaging..
【Safety Topper and Carry Bag】The safety topper is really a must to prevent the auger from going through the ice if it falls out of your drill chuck. Saved your auger from disappearing dow....

【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..

Quick Release & Security Lock Design: 1/2 Inch Square Female to 1/4 Inch Hex Female Socket Adapter.
Convert any air or power impact wrench into a drill or ratcheting wrench into a driver with this single piece chuck converter.
Quick-release mechanism allows for easy, one-handed swapping between bits while working.
Adapter securely holds any 1/4" hex-shank bit (including insert bits).
Made of high quality material for maximum strength and durability..

7mm Wheel Hex Hubs Drive Adapter fits for 1/18 Wltoys 4WD A949 A959 A969 A979 K929 A959-B A969-B A979-B..
7mm Wheel Hex Hubs Drive Adapter is easy to run 12mm wheels on a 1/18 Wltoy car..
7mm Wheel Hex Hubs Drive Adapter hex dimension is 0.47 in (7mm), Wheel Hex Convert Adapter Hub Axle hole diameter is 0.157 in, Wheel Hex Convert Adapter Hub Thickness is 0.157 in..
7mm Wheel Hex Hubs Drive Adapter is made of high-quality Aluminum alloy, Wheel Hex Convert Adapter Hub is lightweight and durable..
Package of 7mm Wheel Hex Hubs Drive Adapter includes: 4 x Wheel Hex Convert Adapter Hub 4 x Axle Pins.

[WHAT YOU GET] – You will get 2Pcs hexagon key adapters for air conditioning ratchet wrench, provides access to 3/16-Inch and 5/16-Inch hard to reach valves..
[FEATURES] – Spring loaded ball bearing on hex adapter locks securely into HVAC service wrench..
[WIDE APPLICATION] – The A.I.FORCE Hex Key Adapters are designed to open and close the compressor service valve, rotalock valves and shutoff valves on air condition, refrigeration and other equipment, although there is very limited space..
[COMPATIBILITY] – The HVAC Service Hex Key Adapters fit for 1/4-Inch square wrench opening on Ratcheting Wrench, and compatible with 3/16" and 5/16" hex valves..
[PREMIUM QUALITY] - The A.I.FORCE Service Hex Key Adapters are constructed to last with high grade steel alloy, heat-treated for maximum strength..

Pin groove keeps pin straight and fiber behind the pin.
Nine 8/32 tapped holes for attaching light kit: One angled to intersect center of lens for illuminating a colored dot.
All 20/20 components are interchangeable with matching threads.
5/16 Mounting Slot accepts a hex or square mounting shaft.