Reviews Hex Flange Shoulder Screw

#10-24 Serrated Flange Lock Nuts | Stainless Steel 304 | SAE Serrated Flange Nuts | Milliontronic | Imperial #10 HEX Flange Nuts | 100 pcs

  • Made of high quality stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • Package Included: 25 x Serrated Flange Hex Lock Nuts 3/8-16..
  • Flange Nuts are great to have around for use in wood and wet environments..
Check Stock

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Type F, 1/4\-20 Thread Size, 1/2\ Length (Pack of 50)

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
  • Steel is often used in applications where strength is the primary consideration.
  • Zinc plating resists corrosion and has a reflective appearance.
  • Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side.
Check Stock

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Type F, 5/16\-18 Thread Size, 1-1/4\ Length (Pack of 10)

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
  • Steel is often used in applications where strength is the primary consideration.
  • Zinc plating resists corrosion and has a reflective appearance.
  • Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side.
Check Stock

uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

Heavy Duty Garage Door Reinforcement Bracket Kit for 16FT Garage Door - Adds Strength and Rigidity Increasing The Overall Life of Your Garage Door

  • (2) 7′-11″ x 2-1/4″ 22 Gauge Galvanized Steel Struts for 16′ wide door..
  • (12) #8 1/2 in. External Hex Flange 7/16″ Hex-Head Self-Drilling Screws.
  • (10) 1″ External Hex Flange 7/16″ Hex-Head Self-Drilling TEK SCREWS (Installation).
  • Assembly instructions and helpful hints included.
  • Will work on a large variety of steel & wood section garage doors. Not compatible with Wayne Dalton Models 8100 & 8200 Garage Doors.
Check Stock

Small Parts 1408FWB Steel Thread Cutting Screw Black Oxide Finish Hex Washer Head Type F 1/4 -20 Thread Size 1/2 Length Pack of 50

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
  • Steel is often used in applications where strength is the primary consideration.
  • Black oxide finish offers mild corrosion resistance and lubricity.
  • Hex washer head has a nonserrated flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side.
Check Stock

Small Parts 3116FSW Steel Thread Cutting Screw Zinc Plated Finish Hex Washer Head Slotted Drive Type F 5/16 -18 Thread Size 1 Length Pack of 25

  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
  • Steel is often used in applications where strength is the primary consideration.
  • Zinc plating resists corrosion and has a reflective appearance.
  • Hex washer head has a flange for additional grip with the mating surface.
  • Slotted drive has a linear slot for use with a flat-blade driver.
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock