Reviews Heavy Pressure Solenoid Valve

1\ HEAVY DUTY HIGH FLOW IN-LINE COMPRESSED AIR PRESSURE REGULATOR 180 CFM

CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately).
Valves have dual-scale readings in psi and kg/cm.
Needle valve flow control provides precise flow adjustment and measurement.
Includes flow regulator, needle valve, electronic solenoid, and bubble counter.
NOTE:Kindly refer to the Regulator Set Up Procedure provided as a PDF manual in the product description section.

Note: This part is a refurbished part,If you have to replace the solenoids or valve body, or reprogram the system, always perform the adaptive relearn. If you don’t, you could run into harsh or erratic shifting..
Fitment:Compatible with Fits all GM Products with the 4L60E Model Automatic Transmission 2003-On.
Package List:This kit includes everything pictured: One (1) A Shift Solenoid One (1) B Shift Solenoid One (1) 3-2 Downshift Solenoid One (1) EPC (Pressure Control) Solenoid One (1) TCC/PWM Solenoid.

Heavy duty chrome train horn with true train horn sound at 140+ decibels.
Chromed brass trumpets with stainless steel brackets.
Operating range from 70 PSI to 140 PSI and up, 12V / 24V Multi-Voltage electric solenoid valve.
Requires air tank and 1/4 inch inner dimension hose (not included) for installation.
Optional accessories (not included) Train horn floor mount stand & air valve lever sets available in 4" (GG 69977), 7" (GG 69979) and 11" (GG 69982), Heavy duty electric solenoid valve (GG 69993).

4 Liter Capacity. That is 2x larger than the size of our competitors’ CO2 generator systems. Holds 600g-800g of citric acid and sodium bicarbonate, aka baker soda powders..
Professional CO2 Kit With All Accessories Needed For A Complete Setup! 4 Liter SUS304 stainless steel bottle / DC mini solenoid / Regulator / Precision needle valve / Bubble counter / CO2 diffuser / CO2-graded tubing / Plastic funnel and measuring cup..
Safety! The wall of the bottle meets the safety requirement - 1.5mm thick SUS304 stainless steel. It can sustain pressure up to 1137 PSI (80kg/cm2). The built-in safety valve will open automatically when the inside pressure exceeds the safety threshold..
12V DC Instead of AC Power. DC solenoid runs on very low voltage and generates almost no heat. The solenoid is warm to touch and is super quiet. No humming noises..
Attentions: The required powders to generate CO2 gas are NOT included! You will need citric acid and sodium bicarbonate powders..

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

Variable Geometry Turbo (VGT) Solenoid, Injection Pressure Regulator (IPR) Valves, Heui A/B Injectors, Valve Cover Gasket Repair Harness..
Compatible with 6.0L Powerstroke Turbo VGT Solenoid (AKA Boost Controller) and IPR Valve 2003-2010 (2003 2004 2005 2006 2007 2008 2009 2010)..
Compatible with 6.6L Duramax (LLY/LBZ/LMM/LML/LGH) Turbo VGT Solenoid (AKA Boost Controller) 2004-2016 (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016)..
Female Socket 2-Wire Pigtail Adapter Connector Repair Harness Kit For Ford Power Stroke, Navistar, And GM Duramax Engines..
You will get: 1x Connector Adaptor Wiring Harness..

Note: This part is a refurbished part,If you have to replace the solenoids or valve body, or reprogram the system, always perform the adaptive relearn. If you don’t, you could run into harsh or erratic shifting..
Fitment:Compatible with Fits all GM Products with the 4L60E Model Automatic Transmission 2003-On.
Package List:This kit includes everything pictured: One (1) A Shift Solenoid One (1) B Shift Solenoid One (1) 3-2 Downshift Solenoid One (1) EPC (Pressure Control) Solenoid One (1) TCC/PWM Solenoid.