Reviews Heavy Duty Transmission Shaft

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
  • Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.
  • Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently.
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have....
Check Stock

APDTY 133962 Heavy Duty Steering Box Stabilizer Bracket Kit (Helps Remove Death Wobble; Includes Grease-able Bearing)

  • Brand New Heavy Duty Steering Box Stabilizer Bracket Kit.
  • Helps Remove The So Called Death Wobble Sympton.
  • Sector Shaft Extension for Added Rigidity, (1) Shaft Support Stabilizer Bearing with grease Zerk Fitting, Installation Hardware, Black Powder Coated Heavy Duty Bracket For Long Trouble Free Life.
Check Stock

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE MOUNT FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY

  • Brand New Southwest Speed Bolt-in Tubular Transmission Crossmember & Polyurethane Transmission Mount For 1955-1957 Chevy's (SWS Part # 400-7084 And # 400-7031). | * This Southwest Speed Bolt-in Tubular Transmission Crossmember Is For Installing A Powerglide, TH350, TH400, Or 700R4 Automatic Transmission In A 1955, 1956, Or 1957 Chevrolet 150, 210 Including Delray, Bel Air, Sedan Delivery, & Nomad. Unfortunately, It Won't Work With Any Of The Convertible Frames That Have The X-Braced Frame, That Encases The Drive Shaft..
  • This Crossmember Will Also Work With GM Manual Transmissions, Including Later Model Muncie & Saginaw 3 & 4 Speed Manual Transmissions, And Allows The Use Of Bellhousings That Don't Have The Rear Engine Mounts On The Bottom Of The Bellhousing. This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy. This Crossmember Moves The Rear Engine/transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission. | * This Transmission Crossmember Kit Includes The Polyurethane Transmission Mount, Which Offers Added Strength Without The Harshness Of A Solid Mount, Making It A Smart Upgrade Over Traditional Rubber Mounts. | * This Crossmember....
Check Stock

9706529 W11086780 Gear - by Huthbrother, Compatible with 5 & 6 QT WP9706529 9703543 Replacement Gear Parts, With 9709511 Gaskets And 1.8 Oz Grease & 9703680 Circlip

  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • The transmission structure of shaft gear wheel is simple, compact, small volume and light weight..
Check Stock

uxcell Cable Wire Binding Protection Flexible Spiral Tube Wrap Band Black

  • Can also pass through a bearing with an inner diameter of 5mm and use it with other robot parts with matching hexagonal holes, which greatly enhances the load bearing and transmission capacity of the robot parts..
  • High quality stainless steel material, with high hardness, wear resistance and durability, used as a drive shaft accessory for intelligent robots, and also suitable for lathe equipment and engineering equipment..
  • You can use a metal cutting blade to cut the Φ5mm stainless steel hexagonal shaft to your own customized length according to your needs..
  • The Φ5mm stainless steel hexagonal shaft has an outer diameter of 5mm and an appearance of a hex with a plane spacing of 4 mm. It is a perfect combination of a circular shaft with a diameter of 5mm and a hex with a plane spacing of 4 mm. It has the advantages of round shaft and hexagonal shaft..
  • Can be used with other robot parts and accessories with matching hexagonal holes, which can effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the force of the....
Check Stock

Oberdorfer N993R Gear Pump with Relief Valve, 8.8 gpm, 1/2\ NPT, 20 ft Maximum Suction Lift

  • SPECIFICATIONS: The International Fluid Power Birotational Gear Pump is a heavy-duty gear pump with a 2-bolt B mount, 1” NPT work port, 3000 PSI, 23.8 GPM flow rate, and 2400 maximum RPM. It weighs 37 lb..
  • HIGH EFFICIENCY: With 2400 max RPM and 23.8 GPM flow rate, this hydraulic gear pump offers high volumetric output. The IFP gear pump provides exceptionally dynamic performance and operational efficiency in demanding conditions..
  • ROBUST: Our hydraulic rotary pump is equipped with top-grade cast iron flanges, shaft bearings, castings, and an aluminum-alloy body to handle system transmission pressures of up to 3000 PSI. Its endurance makes it ideal for harsh conditions..
  • CONVENIENT: This low flow hydraulic pump, made from top-grade materials and precision-honed to perfection, is compact, portable, and interchangeable with Parker "P51.
Check Stock

On-Stage MS9411TB Plus Pro Kick Drum Microphone Stand

  • A compact, heavy-duty stand ideal for bass drums, guitar amplifiers, or anywhere else where a low profile mic stand is needed.
  • Improved features include extra-thick steel shafts and ergonomically designed and anodized machined aluminum center clutch.
  • Also features steel leg housing with adjustable heavy-duty leg mounts, and a scratch resistant finish.
  • A solid steel 5/8-27" threaded lug, oversized shock mount locking washer and steel counterweight complete the professional package.
  • Features steel leg housing with an anti-rotational device on the lower shaft eliminates shaft rotation.
  • Folding legs with plastic end caps offer durability and reduced floor vibrations.
Check Stock

Garage Door Inside T Handle

  • ■ Garage Door Chain Hoist - Wall Mount - Gear Reduced ■ HEAVY DUTY.
  • ■Sprocket ■3' of #41 roller chain ■26' of hand chain ■ 1 chain keeper and a 1/4" key.
  • ■Great addition to any heavy manually operated garage door.
  • ■Easy installation ■Recommended that door has a solid, keyed shaft.
  • ■This is for doors with 1" shaft ■For any questions or special ordering please Send us a message..
Check Stock

LainKeen Inner CV Joint Puller Front Wheel Drive Axle Half Shaft Removal Tool Kit with Heavy Duty 10 Pounds Slide Hammer, 63mm 48mm CV Joint Fork Adapter Attachments

  • Remove CV Axle Easily: Using the CV joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts..
  • Heavy Steel Slide Hammer: The slide hammer and the VC join fork is made of heavy duty steel, which can withstand huge pressure without deformation, is not easy to break. slide hammers are heavier and larger than normal ones, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, the length is 19.5 inches, so it can generate greater pulling force and work easier..
  • Efficient Slide Hammer: The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most veh....
Check Stock