Reviews Heavy Duty Eyelet Punch

Ailejia 20 Pack Curtain Grommets Lnner Diameter Silencer Sliding Grommet Kit Sheers Grommets Reusable Silencer Sliding Easy snap Install Silver 1.73 Inch Inner Diameter Fasteners (Silvery)

Magnetic Mold——Magnetic dies to fix the eyelet and washer well. With the correct opening angle, you can press it with only one hand..
Premium quality——The grommet kit is made of premium copper, the surface looks brighter. This material also has good resistance to rust. Thickened metal eyelets and washers are harder and more durable..
Portable & Labor-Saving——Lightweight & easy to carry. The ergonomic handle is comfortable to hold. Using the principle of two-point support leverage, it is convenient to use and more strength-saving to use. This manual eyelet puncher matches 3/8"(10mm) inner diameter eyelets..
Package Included——The grommet kit set includes a handheld hole punch plier, a pre-punch hole cutter, a cushion plate, and 500 sets of grommet eyelets (each set includes 1 eyelet and 1 washer)..
Widely Application——It can be used for PVC banners, tents, leather, and fabric..

Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
Not recommended for stainless steel such as silverware and utensils.
PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.

Check Stock

3/16 Inch Grommet Tool Kit Grommet Eyelet Plier Set Eyelet Hole Punch Pliers Grommet Hand Press Pliers with 200 Pieces of Grommets Eyelets for Shoes Clothes Bags Craft Supplies

Package content: you will receive 1 piece of grommet eyelet plier and 200 pieces of grommets eyelets, and these grommets eyelets can be divided into 4....
Durable material: the eyelet hole punch plier is made of metal material, durable and sturdy, not easy to break or deform, each one can serve you for a....
Suitable eyelet size: the inner diameter of each grommets eyelet is about 3/16 inches, and the outer diameter is approx. 0.33 inches, each thickness....
Convenient to hold: our grommet hand press plier is designed with smooth and a bend grip, easy for holding, safe to use, brings you a comfortable....
Wide application: you can apply the grommet eyelet pliers set for various projects, and the pliers can press holes into many material surfaces, such....

Check Stock

Swingline 2-3 Hole Punch, Adjustable, Heavy Duty Hole Puncher, 160 Sheet Punch Capacity (74650)

HIGH CAPACITY – Increase productivity with this durable, metal, 2 or 3-hole punch, designed for heavy duty service. Helpful paper guide assists with punch placement and depth..
160-SHEET CAPACITY – High capacity punch powers through stacks of paper, piercing up to 160 sheets, with the option of either 9/32" or 11/32" holes..
REDUCED EFFORT – Specially engineered punch requires 30% less manual force than comparable models. One-touch punch pad extends punch head life..

Check Stock

Igrow

This 3 gallon fabric pots with holes,eliminates the need to use scissors to punch holes and effectively prevents the risk of fingers being cut by the....
This 3 gallon grow bags with holes, they are very suitable for low pressure training, you can easily put the chenille stems in this eyelet..
These eyelets are pretty handy，don`t have to cut the felt bag and these are reusable you wash them.
There are enough stainless steel holes on the upper edge of the plant bags, so you don’t need to cut any more holes work. Save you time..
This 3 gallon fabric grow bags with eyelet,thickness in 260g.bags can be reused for years..

Check Stock

Heavy Duty 3 Hole Punch Heavy Duty Adjustable 3 Hole Punch 30 Sheet Capacity Hole Puncher Black Metal Hole Puncher 3 Ring

50% Reduced Effort Three hole punch steel punch heads pierce through 30 sheets of bulk paper easily..
Easily removable hole punch chip tray container collects the mess for a clean paper punch experience.
Paper Guide for Perfect Alignment Three hole punch for binder is perfect for office and school use.
Rubber base bottom 3 hole punch paper ensures desktop stability.
3 hole punch heavy duty metal construction high quality is built to last.

Check Stock

BEDSIFV 2 Pack Heavy Duty Hole Punch, 1/4" inch Single Hole Punch and 1/8" inch Hand Held Puncher, 20 Sheet Capacity Perfect for Craft Paper Plastic Cardboard Business Card

❤ TWO SIZES❤ 2 single heavy duty hole puncher are included in the package, include a diameter 1/4" and a diameter 1/8". Multiple punch hole needs, a set to get it!.
❤ HEAVY DUTY❤ Thanks to the punched construction design, the PVC material can be easily perforated. Max thickness: Paper 0.06 inch, PVC card 0.04 inch, hard cardboard 0.04 inch. A maximum of 20 sheets of paper can be punched at one time. To make sure the holes are positioned correctly and correctly for each sheet, it is recommended that you punch 17 sheets at a time..
❤ LONG REACH HOLE PUNCH❤ The paper input depth is up to 2.9 inch. It can be punched anywhere on a business card or a 6 inch photo. The traditional hole punch can only punch within 0.4 inch at the edge..
❤ THOUGHTFUL DESIGN❤ Equipped with a collection slot. After punching, the confetti is stored in a small sealed box, which will not mess up your desk and floor. Also the hole punch is compact and portable and fits easily into pockets or backpacks..
❤ Widely Applicable❤ Suitable for paper, card, aluminum foil, cardboard, con....

Check Stock

【Upgraded Version】Grommet Tool Kit,Handheld 3/8 inch Eyelet Kit Manual Grommet Press Machine with 500 pcs 10 mm Grommets

【Get extra hole punch】HAPDEN grommet pliers doesn't require pre-drilling before use.If you need to hole punch,metal grommet kit comes a hole puncher and a white backer block..
【Upgrade jaw and die】Keeping the magnetic function of eyelet tool, HAPDEN adjust eyelet pliers opening angle to improve the accuracy of the clamp die. Metal eyelets do the job work better..
【Intelligent&Portable】Upgraded version grommet setter tool is made of special lightweight aluminum alloy and weighs only 0.9 pounds(0.41kg).Add elastic device, automatic return after pressing..
【Upgrade one-piece handle】Grommet fastener tool one-piece molding handle prevents peeling, black handle is skid-proof and dirty-proof, providing you with a better use experience..
【Anti-rust grommet】Silver grommet is made of chrome-plated metal, which has the function of anti-rust and perfect match with the grommet magnetic pliers..

Check Stock

Waterproof Gladiator Cargo Net- Heavy Duty Truck Cargo Net Tarp (MGW-100) Medium: 6.75' x 8'

Size: Medium 6.75' x 8' foot (for standard truck beds).
Durable, weatherproof heavy-duty 18 oz vinyl material.
Integrated webbing and vinyl prevent snags and secures small objects. Heavy duty cargo net for trucks and trailers..
Multiple eyelet anchor points to make net smaller or larger depending on cargo load.
Four attachment hardware straps and a storage bag included..

Check Stock