Reviews Heat resistant Vinyl Film

VViViD Air Tint Golden Yellow Headlight/Tail Light Window Tint (17.9 Inch x 48 Inch Large roll)

  • ...ches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you’re done! its literally that simple!.
  • Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost completely! The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights..
  • NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM.
Check Stock

EHDIS Window Tint Tool Kit Vinyl Wrap Installation Tool with Heat Gun for Car Wrapping Window Tint Film Applicator with Felt Tint Squeegee,Vinyl Cutter,Razor Scraper,Vinyl Magnet Holder,Working Glove

  • MULTI-FUNCTIONAL TINTING TOOLS :Professional and daily use to DIY wrappers.Suitable for installing all kinds of automotive window tint, paint protection films and solar film, vinyl wrap, car wrap, delicate surfaces, vehicle lettering & graphics, decals, sign making, PPF installing, vinyl film, wall decals, poster, wallpaper installation, all types of vinyl wrap for cars..
  • WINDOW TINT INSTALL KIT COME WITH 1800W HEAT GUN:The Dual Temperature Heat Gun Kit with LCD Display is the ideal tool for stripping paint, removing decals, strips, shrinking wire wrap, etc. You can check the temperature with the Real time LCD window.The Heat Gun kit with 2 different temperature heat settings (450°C [842°F] and 650°C [1202°F]), comes with 1pc Dual Temperature Heat Gun, 1pc Large Deflector Nozzle(8cm), 1pc Reduction Nozzle(2cm)..
  • WINDOW TINTING TOOLS COME WITH DIFFERENT TINT SQUEEGEE:Included 5pcs felt edge squeegee and 1pc wool squeegee,suitable for scraping off the bubbles downright under the film.the black and white card squeegee use for smooth large area window film and can clean the water very clearly for glass, mirror,car window.
Check Stock

BJZ 3/4'' LED Trailer Marker Clearance Lights Amber Round 12V LED Side Marker Front Rear Stop Turn Signal Tail Indicator Light Waterproof for Trailer Truck ATV UTV RV Van Pickup, 10Pcs w/Amber Lens

  • Fitment: Compatible with 2014 2015 2016 2017 Chevy Corvette C7 front rear side marker lights and rear reflectors (NOTE: just wipe the light when using, do not spray water to the film).
  • Designed with Special Vinyl Channel: Adopting special technology allows you to push the liquid and bubbles out easily, no creases in the tint wrap film. give your vehicle blacked out look.
  • Light Lens Protection: Made from the high quality cast vinyl, which makes your marker light scratch-resistant and weather resistant. The back of the tint kits is adhesive, not easily peel off after go through heavy rain, car wash, extreme heat and cold.
  • Easy to Install: This is precut overlays, no modification or trimming needed, just tear off the film and apply the tint cover to your lights. recommend wrapping the corners with a heat gun or hairdryer to stick better.
  • Package Including: 1 pair front side marker Lights vinyl film + 1 pair rear side marker lights tint covers + 1 pair rear reflectors tint overlays + 1 x squeegee + 2 x clean kits. 180 days manufacturer warranty since order purchase date, feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period.
Check Stock

QUICTO Car Light Tint Film, 47.2×15.7Inch Extra-Wide Headlight, Fog Light, Taillight, Vinyl Self Adhesive Car Headlight Sticker, Car Headlight Accessories (Black)

  • PREMIUM MATERIAL - The tinted film is made of scratch-resistant durable vinyl, which can effectively prevent some of life's light friction, gravel, sewage erosion and car wash scratches, and also prevent aging and cracks..
  • PREMIUM QUALITY - The light transmittance of the headlight tint is up to 90%, waterproof, sun protection, light weight, good adhesion, will not affect the original light source. Headlamps with tinted film work well in rain, fog, snow or night driving..
  • PERSONALIZED DECORATION - Light black headlight film can give your car a calm personality. This headlight film is different from spray paint and general car light film. The film can be peeled off at any time. The lights are still beautiful..
  • INSTALLATION - To get the vinyl to conform to the curves, simply heat it with a blow dryer and apply as you stretch. Finally, use a sharp blade to cut the vinyl to shape, trim off any excess from the headlights, and you're done..
  • UPGRADE AND REPLACEMENT - This headlight film increases the thickness of the film layer, changes the color of the headlight, and does not affect the light due to the thicker film layer, Dimensions: 47.2" x 15.7" (120x40 cm).
Check Stock

VViViD Air-Tint Matte Black Headlight/Tail Light Window Tint 17.98Inch x 60 Inch Large roll

  • VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include....
  • This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap....
  • This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl....
  • Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost....
  • NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 17.9" x 60".
Check Stock

VViViD Air-Tint Matte Black Headlight/Tail Light Window Tint (12 Inch x 24 Inch 2-roll Pack)

  • ...ches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you’re done! its literally that simple!.
  • Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost completely! The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights..
  • NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM.
Check Stock

HTVRONT HTV Vinyl Rolls Heat Transfer Vinyl - 12\ x 5ft Turquoise HTV Vinyl for Shirts, Iron on Vinyl for All Cutter Machine - Easy to Cut & Weed for Heat Vinyl Design (Turquoise)

  • ✅ 10 Sheets transfer tape for Printable Heat Transfer vinyl.
  • ✅ Use our mask film to transfer your cut designs and ready them for heat pressing..
  • ✅ You can use your own home inkjet printer and digital cutter to begin creating professional quality print and heat press personalized items. These inkjet printable vinyl sheets are compatible with any inkjet printer and are perfect for the print and cut features of machines such as the Silhouette Cameo or Cricut Explore..
  • ✅ Our mask film to transfer your cut designs and ready them for heat pressing. Mask film is used to transfer the printed and cut design to the backing making it ready to heat press..
  • ✅ Whether you’re a beginner or a pro, you’ll find that using Threadart printable heat transfer vinyl and mask film is as easy as it can be! Threadart high-quality vinyl sheet garments can easily be washed in hot or cold water in any washing machine for easy cleaning. Designed for inkjet printers..
Check Stock

TOMALL 78.7''x12'' Navy Blue Vinyl Film for Car Headlight Taillight Fog Lights Tint Self Adhesive Decals Sports Modification Car Stickers (Navy Blue)

  • ✔Vinyl Film - The size of this sticker is 78.7'' x 12'' (200cm x 30cm). It is made of vinyl material, stretchable, heat-resistant and waterproof, and comes with a self-adhesive, which makes it easy to stick..
  • ✔Change Color - This film can be used to change the color of your car's headlights/taillights/foglights, which is very personalized. Note: For your safety, it is recommended that the dark black film is only used on the taillights..
  • ✔How to Install - Clean the dust of the headlights and spray water, then tear off the two layers of the sticker, spray water on the adhesive, to facilitate adjustment when pasting, and heat with a hot air gun during the installation process so that the sticker can be Stretch and stick to the lights, and use a scraper to remove water and air bubbles to make the sticker more fit..
  • ✔Attention - When using a hot air gun, do not continue to blow the same place for too long, otherwise the film will be too hot and the film will be uneven or scratched when it is scraped. Just use hot air evenly. TIPS: If you are worried that you cannot install it well, or want to save time, you can ask a professional to install it..
  • ✔Come and Buy - The package contains 1 roll vinyl film, the size is 78.7'' x 12''/ 200cm x 30cm, which ca....
Check Stock

Threadart Eco Ink Printable Glitter White Heat Transfer Vinyl 20\ Heat Transfer Vinyl Film By The Yard | For Wide format Eco Ink Printers | Glossy, Matte, Glitter, Reflective, and Pearlshine Types Available

  • ✅ Threadart printable glitter white heat transfer vinyl by the yard, 20" width. For wide format printers using eco inks. Cuttable, easy to weed, heat transfer vinyl for shirts, pillows, caps and more. Perfect for print and cut The vinyl is durable polyurethane which is used to design custom t-shirts as it can be washed multiple times without changing appearance or coming off the item. Sorry, these printable htv vinyls do not work with desktop inkjet or laser printers..
  • ✅ Use our mask film to transfer your cut designs and ready them for heat pressing. Compatible with your Roland, HP DesignJet, and all wide format printers using eco inks..
  • ✅ Will adhere wash after wash to 100% cotton, 100% polyester, and poly/cotton blend fabrics. Threadart printable glitter vinyl has a brilliant, glittery, finish. 264 micron thickness.
  • ✅ Use our mask film to transfer your cut designs and ready them for heat pressing. Mask film is used to transfer the printed and cut design to the backing making it ready to heat press..
  • ✅ Whether you’re a beginner or a pro, you’ll find that using Threadart printable heat transfer vinyl and mask film is as easy as it can be! Threadart high-quality vinyl by the yard can easily be washed in hot or cold water in any washing machi....
Check Stock