Reviews Heat Sink Profile

Silicon Power Value Gaming DDR4 RAM 16GB (8GBx2) 3000MHz (PC4 24000) 288-pin CL16 1.35V UDIMM Desktop Memory Module with Heatsink Grey SP016GXLZU300BDAJ7

Supports Intel Coffee Lake Processors and Intel Extreme Memory Profile (Intel XMP) Standards..
Aluminum heat sink and low voltage of 1.35V enable fast heat dissipation and lower hardware power consumption..
Speeds up to 3000 MT/s / Timing 16-18-18-38 / Voltage 1.35V / Unbuffered / 8GB based.
Backed by a lifetime warranty to promise complete services and technical support..

NVMe PCIe Adapter Apply to 2280/2260/2242/2230mm M.2 NVMe and AHCI SSD, Adapter with Aluminum Heatsink Solution..
M.2 PCIe Adapter Supports PCI-Express X4, X8, X16 slots. PCIe 4.0 lanes with up to 64Gbps bandwidth, backward compatible with PCIe 1.0 2.0 3.0, Full release the speed of PCIE 3.0/4.0 X4 Full Speed M.2 PCIe SSD, such as 64Gbps M.2 PCIe 4.0 SSD..
PCIe NVMe Adapter Supports Windows 11/10/8、Windows Server 2012 R2、Linux、Fedora、SUSE、Ubuntu、Red Hat（no driver required） NOTE: Go to NVMe SSD manufacture website for driver installation if your PC can not recognize NVMe SSD. Win7 and Windows Server 2008 R2 need additional driver for NVMe SSD..
PCIe NVMe 3.0/4.0 x4 Adapter with 2 thermal pads, You put one between the ssd and the carrier and one between the ssd and the heat sink..
Package Including: ➤1-M.2 PCIe Adapter x1.➤2-SSD Spare bolt（Pre-installed on PCB）.➤3-Low Profile Bracket x1.➤4-Screw Driver x1.➤5-Regular Profile Bracket x1.➤6-Heat conducting silica gel pad x2 （thick + thin）.➤7-Aluminum Heatsink x1.➤8-Heatsink fixing spring nails x2.➤9-PCB fixing screws x2.➤10-Bracket fixing screws x1..

Special attention: The current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-25AA Solid State Relay 25A AC to AC.
Heat Sink Mounting Thread Diameter (Approx.) : 0.5cm / 0.19".
Heat Sink Total Size (Approx.) : 8 x 4.9 x 4.9cm / 3.1" x 1.9" x 1.9" (L * W * T ).

❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.

ATTRACTIVE LOW-PROFILE DESIGN: Unlike old-fashioned, bulky dish racks, which can be a true eyesore in your kitchen, Sinkin Dish Drying Rack has a....
REMOVABLE CUTLERY & UTENSIL HOLDER: Complete with drainage holes, Sinkin features a utensil and cutlery holder that can be removed or repositioned to....
MADE WITH DURABLE MATERIALS: Sinkin dish rack is made with durable polypropylene and coated wire. Rubber coated feet ensures it stays in place without....
WORKS WITH ALL SINK STYLES: Sinkin dish drainer works with all styles of sink, including standard drop-in sink, undermount sink, apron sink, corner....
SIMPLE, STURDY & STYLISH: Designed by Helen T. Miller for Umbra, Sinkin Dish Drying Rack measures 14 x 11 x 5.25 inches and is a simple, stylish way....

CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio..
BRIDGEABLE - Full range, four channel amplifier with flexible installation allows this amp to run in four channel or bridged mono mode, giving you the options you need to maximize the output of your car audio..
BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth..
CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system protection allows you to monitor overload and speaker shortages with illuminated indicators..
HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile, to keep your vehicle looking clean while delivering optimal power..

➤ M.2 NVME SSD to PCIe 3.0 x4 channel for Key-M M.2 SSD (form factors 2230, 2242, 2260,2280).
➤ M.2 SATA-based SSD to SATA channel for Key-B/B+M M.2 SSD (form factors 2230, 2242, 2260,2280).
➤ mSATA to SATA channel for 30x50mm mSATA SSD.
➤ With advanced heat sink solution,PCB 24 X 5 copper hole effective ventilation heat dissipation,Including 2 Aluminum Heatsink.
➤ Including both regular size and low-profile slot brackets for flexible system chassis installation. LED power and data transfer status. No driver installation required.

Support Windows 7, 8.X, 10, 11 ,Windows Server 2008 R2, 2012, 2016, 2019,Linux 2.6.X to 5.X.
PCIe v1.0a (2.5 GT/s) X1 Lane. Compatible with X1, X2,X4, X8, X16 standard and low-profile PCI Express slots..
Compatible with IPMI pass-through (SMBus or NC-SI), iSCSI boot, PXE remote boot, VLAN filtering.
Supports Full Duplex Flow Control (IEEE 802.3x).
Imported alloy heat sink , can effectively remove excess heat , keep the network card at normal operating temperature and double stable operation.

➤ Supports two M.2 SSD simultaneously (One SATA interface and one NVMe interface).
➤ Converts one M.2 NVMe SSD (M Key) interface to PCIe 3.0 x4 interface (PCIe 2.0 Compatible), Converts one M.2 SATA SSD (B Key or B+M Key) interface to SATA 6Gbps interface (SATA cable connection required)..
➤ With advanced heat sink solution,PCB 24 X 5 copper hole effective ventilation heat dissipation,Including 2 heat sinks.
➤ Supports M.2 SSD size 2230, 2242, 2260, 2280, 22110mm.
➤ Including both regular size and low-profile slot brackets for flexible system chassis installation. LED power and data transfer status. No driver installation required.