Reviews Header Bolts

9Pin USB Header Splitter Male 1 to 4 Female Extension Cable Card for Motherboard USB 2.0 Splitter Cable Connector with 3M Adhesive Adapter Port Multiplier for CPU Fans RGB Lights WiFi Receiver

  • [Male 1 to 4 Female USB Header Splitter ] 9pin USB header provides your motherboard with more 4 USB header for use with most USB peripherals, like....
  • [Easy Setup] This USB 2.0 Splitter cable connector with 3M adhesive, the internal hub can be conveniently attached to case of your motherboard to....
  • [Safe and Reliable] USB 2.0 header hub with wire belt shielding, Can Prevent short circuit outlet design. Motherboard USB splitter can prevent....
  • [Port Multiplier Version] 1 male to 4 female, connector A: 9Pin USB header male, connector B: 4x 9pin USB header female, work without any driver..
  • [Package Details] 1x USB Header Male 1 to 4 and hub connecting, 1x 30cm 9 pin USB header cable..
Check Stock

MEIRIYFA USB Header Extension Cable, USB 2.0 9-Pin Male to 9-Pin Female Internal Motherboard Header Cable for USB Ports, Expansion Cards and Motherboard Ports 20.3 inches（2 Pack)

  • 【Applicability】: USB 2.0 9-pin male to 9-pin female internal motherboard header cable, jumper to reduce and eliminate stress on rear USB expansion board or front panel USB ports as well as expansion card and motherboard port connections..
  • 【Extendibility】: The USB 2.0 header extension cable extends your 9-pin USB IDC motherboard header cable length by 20.3inch/515mm, which is more convenient and efficient..
  • 【How to use】: Connect the motherboard USB 9-pin header port to the 9-pin front panel of the PC case. USB enclosure to motherboard header cable, USB internal header cable, USB header cable..
  • 【Safety】: The 9-pin USB 2.0 header protects against short circuit socket design, which can prevent the risk of accidental removal of the circuit board, pins and case short circuit..
  • 【Material】: The 9-pin jumper has a flexible PVC sheath, which is flexible and environmentally friendly, which greatly improves its durability and life..
Check Stock

MakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero W V1.3 Pi Zero Board NOT Included with Protector 2.4A Power Supply 1.5m Cable WiFi Dongle 16GB MicroSD Card HDMI Adapter

  • 9-in-1 Essential Accessories Kit for Raspberry Pi Zero, RASPBERRY PI ZERO IS NOT INCLUDED.
  • A Form Fitting 4-Port Stackable USB Hub HAT for Raspberry Pi Zero v1.3 (with Camera Connector).
  • Transparent Acrylic Case together with nylon bolts, imprinted with GPIO pins guides you the correct connection..
  • 150Mbps Wireless N WiFi USB Nano Adapter, Mini HDMI Connector, 3x20 Pin Header Set, All Gold Plated..
  • 16GB Micro SD Card and preloaded with the latest version of NOOBS installer..
Check Stock

Mophorn Catalytic Converter Direct Fit Front Exhaust Manifold High Flow Catalytic Converter Compatible with Subaru Impreza Legacy Forester Outback 06-12 4 Cyl 2.5L Except Turbo W/Gasket Kit

  • OEM High Flow Design: This catalytic converter is constructed to meet or even exceed OEM quality. Its high flow design can provide more oxygen to your....
  • Stainless Steel Structure: The Subaru exhaust header set with a stainless steel body, can endure high-temper gases from the exhaust. Its internal....
  • Bolt-on Installation: The high flow catalytic converter has standard specification flanges designed for easy installation. Direct bolts exist in the....
  • Standard OBD IV Compliant: To ensure the exhaust emissions meet the Federal Emission Standards, this free-flow catalytic converter is compliant with....
  • Vehicle Compatibility: Our high-quality Subaru converter is compatible with the 2006-2010 Subaru Forester, 2006-2011 Subaru Impreza, 2006-2012 Subaru....
Check Stock

PAGOW 10 PCS Gy6 Exhaust Bolt and Gasket Kit for 50cc 125 cc 150cc Scooters ATVs Moped Quad 4 Wheeler Dune Buggy Sandrail Vehicles Motorcycle (2 Sets)

  • Best Compatibility: The Gy6 exhaust bolt and gasket can match with 50cc 125 cc 150cc Taotao Sunl Coolster Jonway Roketa Scooters ATVs Go Karts Moped Quad 4 Wheeler Dune Buggy..
  • Size Details: Bolts size: approx. M6X32mm long. Nuts/Caps: approx. 30.5mm long. Exhaust gasket outer diameter size: approx. 30mm. Exhaust gasket inner diameter size: approx. 23.5mm. Thickness of exhaust gasket: approx. mm..
  • Durable Material: The exhaust studs nuts are made from metal, which is sturdy and can last long time..
  • The header was bent from the original owner. When installed on new skid plate, it can create a gap and an exhaust leak..
  • Package Included: You will get 4pcs studs, 4pcs nuts and 2pcs gasket, 10 pcs in total..
Check Stock

LIBERRWAY Exhaust Wrap Header Wrap Exhaust Heat Wrap for Exhaust Pipes Tap Kit for Car Motorcycle 2 Rolls of 2 x50ft with 20 Stainless Ties and Gloves

  • Premium Quality Exhaust Heat Wrap: LIBERRWAY exhaust wrap is made from pulverized lava rock. The header wrap reduces heat under hood up to 50% and....
  • Effective Exhaust Header Wrap: Withstands 1400℉ direct heat and 2000℉ intermittent heat. Stronger and more durable for improved thermal....
  • Functional Header Wrap: Extremely pliable for a tight and secure wrap. Improves horsepower performance and can be used on car exhaust header wrap,....
  • Easy to Install: Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching.....
  • What You Get: 2 rolls of 2 in (width) x 50 ft (length) x 1/16 in (thickness) header exhaust wrap, 20 pcs 0.3 in (width) x 11.8 ft (length) 304....
Check Stock

CY USB 3.1 Front Panel Socket to USB 3.0 20Pin Header Male Extension Adapter for Motherboard

  • Connector1: USB 3.0 Front Panel Socket / Connector2: USB 3.1 Front Panel Header.
  • The adapter is a converter to convert the available USB 3.0 header of a motherboard into a USB 3.1 header. Thus the USB 3.1 port of a housing can also....
  • Even the most up-to-date motherboards with AMD AM4 or Intel 2066 sockets are not always equipped with a USB 3.1 header. The adapter is the perfect....
  • The small converter is plugged into a USB 3.0 header that provides two USB 3.0 lanes. Thus, two data lines with 5 Gbps each are available, which are....
  • The converter thus provides a full-fledged USB 3.1 port..
Check Stock

TWOPAGES Isabelle Linen Custom Curtain Drapery for Living Room, Bedroom (Isabella)

  • Sole per panel. Made of 15% cotton, 20% linen and 65% polyester, natural linen look. Drapery unlined. Heavyweight 500 gsm. Sunlight shading rate 85%..
  • WIDTH: For pinch pleat, goblet header, panel width is the width after pleats already set, we recommend 1.0-1.1 times wide of your curtain rod or track. For tab top and rod pocket header, we recommend fullness ratio 1.0-1.2 times wide of your curtain rod. For grommet header, we recommend fullness ratio 1.5-2 times to create the waves and folds when close the curtains. For flat hook and back tab header, we recommend fullness ratio 1.25-2 times wide of your curtain rod..
  • LENGTH: For grommet, rod pocket, back tab and tab top header, measure from the top of rod to where you want the bottom of the drapery to be (1/2″ above the floor, or approximately 6″ to 8″ below the window sill ). This is your finished top of pole to hem drop. For flat hook, pinch pleat and goblet header, measure from bottom of rings to top of floor or top of window sill, depending on desired window coverage. Subtract 1/2″ to get the panel length you need..
  • Fit for living room, bedroom, patio door, club, hospital, room divider..
  • Easy Care: Machine washable in cold water, use only non-chlorine bleach when needed, tumble dry l....
Check Stock

TWOPAGES Liz Linen Curtain Linen Drapery Panel for Living Room Bedroom Patio Door (Custom)

  • FABRIC: Sold per panel, not a pair. 80% Polyester, 20% Linen. Heavyweight 350 gsm faux linen material. Skin-friendly, excellent colorfastness..
  • WIDTH: For pleated, goblet header, panel width is the width that pleats are already set, we recommend fullness ratio 1.0 time wide of your curtain rod or track. For tab top and rod pocket header, we recommend fullness ratio 1.2-1.5 times wide of your curtain rod. For grommet header, we recommend fullness ratio 1.5-2 times to create the waves and folds when close the curtains. For flat hook and back tab header, we recommend fullness ratio 1.25-2 times wide of your curtain rod..
  • LENGTH: For grommet, rod pocket, back tab and tab top header, measure from the top of rod to where you want the bottom of the drapery to be (1/2" above the floor, or approximately 6" to 8" below the window sill ). This is your finished top of pole to hem drop. For flat hook, pinch pleat and goblet header, measure from ring eyelets to the floor. Subtract 1/2" to get the panel length you need..
  • Fit for living room, bedroom, patio door, club, kitchen, hospital, room divider..
  • Machine washable for the unlined, white darkening or 90% blackout lining, in cold water and gentle circle. Dry clean suggested for privacy or thermal blackout l....
Check Stock