Reviews Hdmi Rf Signal

12ft RCA Single-Channel Male-Female Extension Cable - Black

  • Despite the introduction of more advanced audio and video signal cables such as HDMI and Toslink most audio and a large number of video connections still use the common RCA connector.
  • This is a single-channel cable with a male RCA plug on one end and a female RCA jack on the other end each with molded connector housings and strain relief boots.
  • The cable is ideal for extending low-frequency RCA connections such as standard audio signals.
  • For higher-frequency signals such as for RF or composite video over longer lengths we recommend the use of one of our premium RG-6 or RG-59 based cables.
  • HDMI the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Check Stock

SDI to HDMI, 3G-SDI/HD-SDI/SD-SDI to HDMI Converter Adapter,SDI in HDMI Out, SDI in SDI Out Loopout 1080P @60Hz Video Audio Splitter, Auto Format Detection and Stereo Audio De-embedder, Support HDCP

  • SDI to HDMI Converter, Convert pure digital SDI signals to HDMI signal. Auto format detection for 3G-SDI, HD-SDI and SD-SDI. designed for professional SMPTE video applications and support audio and video synchronization output. The SDI to HDMI converter only supports SDI signal convert to HDMI signal, not support RF, CVBS, AHD, TVI, CVI etc BNC signals. Does not support bidirectional transmission..
  • Auto format detection SD/HD/3G-SDI input signal. Convert SDI to HDMI and SDI both or seperately. Support 10-bit deep color, work as SDI Repeater & Extender with the Re-clock function and support multiple cascaded..
  • SDI in HDMI out and SDI Loop Outputs: Support 1 HDMI output and 1 SDI Loop Output,SDI data transfer rate up to 2.97Gbps, HDMI Output up to 1080P@60Hz. The loop-through design also allows you to view the original SDI content on an SDI monitor simultaneous with the HDMI display. SDI Input Resolutions: 480i /567i, 720P @30Hz /@50Hz/@ 60Hz,1080i /@ 50Hz/60Hz, 1080p/50Hz/60Hz,1080P @ 24Hz / @ 25Hz / @ 30Hz. HDMI Output Resolutions:720P/@ 50Hz, 720P / @ 60Hz,1080p/@24Hz /@25Hz /@30Hz/ @50Hz /@ 60Hz..
  • The SDI interface is built in a sturdy metal chassis, there is no static noise problem. *SDI data rate: 270Mb / s, 1.485 Gbps, 2.97Gbps. *Audio and image ou....
Check Stock

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock

RCA CRF907A RF Modulator - Quantity 1

  • RCA RF Modulator - Convert VGA 、AV video & audio signal to coax RF TV signal , helping combine your PC ( computer / laptop ) DVD , VCR VHS or Game Console etc. to your home theater to share the MPEG4 movies downloaded from the internet，hook up your DVD / VCR etc. VGA video devices or VHS / Game Console RCA audio & video devices with a RF splitter or large screen TVs that come with coax analog signal directly to demonstrate the multimedia documents or dispaly tv videos..
  • VGA RF Adapter - Ultra long distance signal transmission can be carried out by the included F type male to PAL male coaxial cable to achieve sharing multimedia documents , movies , videos or tv programs on multiple tv screens in diffrent rooms or farther away from the VGA / RCA source, just like working on your pc in your own room while playing entertainment videos to parents or children in another room, which is very conducive to protecting personal privacy and enjoying independent space..
  • AV & VGA to Coaxial RF Converter for TV - VGA (video signal only , not come with audio ) in + AV composite audio / video in ( An additional 3.5mm audio cable is required, which can be 3.5mm to 3.5mm, 2rca to 3.5mm or 3rca to 3.5mm )， then RF coaxial out and output only analog signals, the image....
Check Stock

gofanco HDMI 2.0 2x4 Switcher Splitter with Audio Extractor – 4K 60Hz YUV 4:4:4, Auto Downscaling, HDR, HDCP 2.2/1.4, 18Gbps, EDID, Audio Converter to L/R RCA & Toslink, 2 in 4 Out (HDSplit24)

  • ✔ 2x4 HDMI 2.0 SWITCH SPLITTER- A complete solution to distribute HDMI signals from one of two inputs to four outputs simultaneously without signal degradation. *Note: Only 1 source device can be selected at a time, and all 4 outputs ports will have duplicated video signal from the 1 input source selected. !!!.
  • ✔ AUTO VIDEO SCALING/DOWNSCALING – Supports mixed 4K & 1080p display outputs. A 4K video source device can simultaneously display 4K content to 4K monitor(s) and 1080p content to 1080p monitor(s) via downscaling. **Note: Does NOT support resolution downscaling from 4K @60Hz 4:2:2 to 1080p.
  • ✔ AUDIO EXTRACTOR – Extracts audio from the HDMI signal to Analog RCA (L/R), and Digital Toslink Audio.
  • ✔ ADVANCED FEATURES – Supports the Latest standards. HDMI 2.0, HDCP 2.2/1.4, 18Gbps bandwidth, EDID, 4K @60Hz (4:4:4 8-bit), HDR 4K @60Hz (4:2:0 10-bit).
  • ✔ PREMIUM QUALITY & SERVICE: Surface-mountable metal housing allows easy placement and provides higher level of RF/EMI shielding. FCC, CE and RoHS compliant. Backed with a 3-year limited warranty and ex....
Check Stock

YWBL-WH Logarithmic Power Detector Meter AD8317 1M-10GHz 60dB RF Power Meter Logarithmic Detector Controller for Amplifier 50 Ohms

  • AD8317 CHIP---The logarithmic power detector is designed by using AD8317 chip, and is used for RF signal power detection.
  • -55dBm to 0dBm---The logarithmic power detector can detect power in -55dBm to 0dBm of an RF signal, so that the RF signal is converted to DC voltage output.
  • APPLICATION AREAS---The logarithmic power detector could be used for RF transmitter PA set point control and level monitoring.
  • Power monitoring in a radio line transmitter.
  • RSSI measurements in base stations, WLAN, WiMAX, and radar.
  • 55dB---The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB.
  • WIDE APPLICATION---The logarithmic power detector could be widely used radio frequency signal detection, signal power measurement, environmental field strength detection, or as a part of automatic gain control and automatic level control.
Check Stock

Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection

  • The product is designed by using AD8317 chip, and is used for RF signal power detection..
  • Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
  • The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
  • It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
  • It can also be used as part of automatic gain control and automatic level control..
Check Stock

4 Pack 3DHeaven Rechargeable 3D Glasses Compatible with EPSON ELPGS03 3-D Glasses

  • [RF 3D Glasses] The active shutter 3D glasses use RF to transmit signals, works without emitter. Compared with traditional IR signal transmission, the RF signal connection is faster, and the continuity is more stable. Pack of 2, super saving!.
  • [Compatible Devices] The RF 3D active shutter glasses suitable for most of RF 3D signal TVs and 3D projectors. Compatible 3D RF projector: EPSON, Sony, JVC, xiaomi2, Lenovo and other more.
  • Compatible 3D HD TVs: Epson, Samsung, Sony, Panasonic, Sharp, Toshiba, Konka, TCL, Haier and more. Can replace these models of 3D glasses: TDG-BT500A, TDG-BT400A, SSG-5100GB, TY-ER3D4MU, AN3DG40 and more. [PLEASE NOTE: Device before 2012 is not compatible with this remote control.].
  • [Easy to Use] Rechargeable design 3d RF glasses, with ON/OFF switch. Auto 5 seconds Stand by and 5 minutes Shut Off. Not throwaway 3D glasses. High definition, no ghosting images, no flickering, clearer and more stable than IR signal connection. Providing you a superior 3D visual experience!.
  • [Quickly Pairing] When pairing, please make sure that the distance between the 3D glasses and the 3D device is less than 19.5 inches/50 cm. Press the switch button, the green LED indicator will stay on for 3 seconds, the glasses are in the power-on state, then s....
Check Stock

AD8317 Logarithmic Detector, RF Log Detector Logarithmic Detector, Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller

  • [Main function]: This logarithmic detector is designed for ADI's AD8317 chip and is used for RF signal power detection..
  • [Detection frequency range]: The detection frequency range of the logarithmic detector is 1M-10GHz, and it can detect RF signals with a power of -55dBm to -0dBm, and convert the RF signal into a DC voltage output..
  • [Excellent performance]: The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which will expand the dynamic range of the detected signal by 55dB..
  • [Wide use]: The logarithmic detector is widely used in radio frequency signal detection, signal power measurement, environmental field strength detection, and can also be used as a component of automatic gain control and automatic level control..
  • [Stable and durable]: This logarithmic detector can withstand high and low temperatures, is stable and durable, with a temperature measurement range of 0°C to 1024°C, and a converter temperature resolution of 0.25°C..
Check Stock