Reviews Hdd Mounting Kit

Sedna - PCI Express Quad 2.5 Inch SATA SSD Controller Card (with Built in Power Circuit, no Need SATA Power Connector) (SSD/HDD not Included)

Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
Appearance: Brushed plastic with an aluminum appearance.
Stealth interior: hidden PSU / hidden HDD.
The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
Innovative liquid cooling mounting systems.
Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).

2.5" To 3.5" Mounting Adapter Bracket, works with HDD/SSD.
Using precision die stamping, great assemblability, easy to install..
2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
Compatible with SSD solid state disk and regular hard disks..
Package include :4pcs Holders, 1pc Slotted Screwdriver and some screws..

2.5" To 3.5" Mounting adapter bracket, works with HDD/SSD..
Using precision die stamping, great assemblability, easy to install..
2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
Compatible with SSD solid state disk and regular hard disks, with SATAI, SATAII, SATAIII..

Case Size(Installation): 11.3cm x 9.1cm x 6.2cm / 4.45inch x 3.58inch x 2.44inch.
Note: the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)..
This is metal case with super mute cooling fan kit for X820 V3.0 SSD/HDD storage board user, very easy to install, perfectly compatible with Raspberry Pi 3 Model B+/3B/2B/B+/Rock64 & X820 V3.0 Board&X735 Board..
Note: Raspberry Pi, X820 board, SSD/HDD and power adapter is not included in the packing list..
Installation Video refer to Geekworm WiKi search X820.
Power switch with beatiful LED indicator to control the power of X820 V3.0 and the Raspberry pi.
Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weekeness for the bluetooth and WIFI signal..

Support 2.5" HDD/SSD Mounting Adapter Bracket.
M3 + #6-32*6 screws included for mounting the bracking onto the PC case.
Fits in desktop PC case with standard 3.5" internal drive bay (all popular PC casings).
The best electing for DIY. 30 days product Replacement or Full Refund if you are not satisfied.

Work with Regular Computer Case: Widely compatible with different desktop computer cases. With the bracket you can mount a 2.5” hard drive to the 3.5” hard drive slot in a computer case..
Work with Mac Pro 2019: Can be mounted to a Mac Pro 2019. With this mounting kit, you can install 2 x 2.5” SSDs/HDDs in Mac Pro 2019..
Dual Hard Drive Installation: Supports installing 2 x 2.5” SSD/HDD. A single hard drive is also applicable..
Metal Strip Support: Put your hard drive on the metal strip support, and turn the screws into the holes on the two sides of the hard drive. No need for holding the hard drive manually..
Easy to Install: For Mac Pro 2019, lead the bracket into the computer case via the slideways and fix it from the outside with screws. For a regular computer case, you can install the bracket with screws..

CLEAR VIEW - Four 4mm thick tempered glass panels protect the chassis while providing easy access to the components.
COMPACT DESIGN - Supporting mini ITX and Micro ATX motherboards.
INTERCHANGEABLE PANEL DESIGN - Change configuration to fit your needs with Symmetrical panels (Top, Sides and Bottom Panels).
COOLING with TEMPERED GLASS – 1 of the 4 tempered glass panels is designed for radiator mounting that is gapped for more airflow.
DRIVE BAYS – 3 x 3.5”/2.5” with HDD Tray plus 3 x 2.5” with HDD Tray.