Reviews Harmonic Balancer Installer

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
Package dimension is 4.5 inches width by 5 inches height by 2 inches depth.

Check Stock

Tallew 25264 Harmonic Balancer Puller Crank Pulley Puller Automotive Replacement Engine Quickly Removes Harmonic Balancer Puller Kit LS Balancer No Tapped Holes No Remove Radiator Compatible with GM

Novel Design: the 25264 harmonic balancer puller features a clip in design that provides a strong grip, and can be removed without bolting the puller to the balancer, helping to remove the balancer quickly and easily.
Easy to Use: crank pulley balancers can remove the balancer safely and quickly, no need for threaded holes, no need to remove the radiator, easy to operate, easy to do tough jobs, and also save your time.
Reliable Material: harmonic balancer puller is made of quality carbon steel material, the surface is sprayed with anti oxidation and anti corrosion paint, which is corrosion resistant, anti rust, sturdy and serviceable, with a certain weight and strength, does not deform, and ensures safe use.
Good Compatibility: compatible with GM engines: 5.3 L, 5.7 LS1, 6.0 LS2, 6.2 LS3 and 7.0 L, and compatible with Dodge: 3.5L V6, 3.6L V6, 4.7L V8, 5.7L V8, 6.1L V8.
Note: not for compatibility with 1997 or earlier GM LT (5.7L LT1.

Check Stock

DASBET 46Pcs Harmonic Balancer Puller Set, Steering Wheel Puller, Gear Puller, Crank Shaft Pulley w/Case

【Application】The tool set applies equal pressure to the hub, helping removing harmonic balances, crankshaft pulleys, and steering wheels safely..
【Including】 Package provides everything you need to pull a harmonic balancer, 1 pc- pressure screw.
【Material】Constructed from heat-treated carbon steel for ultimate strength and longevity.
【Easy Storage】The tool set comes in a blow-mold case with handle and latches for secure storage, simple organization and easy transportation..
【Service】If you have any issues with the Harmonic Balancer Puller, please contact customer service for troubleshooting help..

Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....

Check Stock

Crank Pulley Puller, GM Harmonic Balancer Puller Automotive Replacement Engine Harmonic Balancers without Tapped Holes

Damper Remover Puller is designed to Remove Harmonic Balancers without Tapped Holes,Time Saving Tool - No Need to Remove Radiator..
Fit: Applicable to General Motors engine models: 5. 3 L, 5. 7LS1, 6. 0 LS2, 6. 2 LS3, 7. 0 L, and Engine models compatible for Chrysler/Dodge: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8..
Not Fit: Not applicable to 1997 or earlier GM LT (5.7L LT1<4) series engines (with threaded holes), and will not work with 2018 and newer Coyote balancers..
Time-saving tools: No need to disassemble the radiator, unique snap-on accessories, allowing removal without bolting the puller to the balancer. Harden and temper. Make it easy to remove the damper..
Advantages: The design can be disassembled without disassembling the radiator when disassembling the harmonic balancer without threaded holes, and can be disassembled without connecting the puller bolts to the balancer..

Check Stock

SEEBOO LS Harmonic Balancer Installation Tool Crank Pulley Install Tool Compatible with GM 1997-UP V8 LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9 with Thrust Bearing & Wrench Flats

【HIGH PERFORMANCE】—The Crank Strength Of The Harmonic Balancer Installation Tool Is 12.9, And It Is Made Of High-Quality 35CrMo Heavy Steel. The Quenching Process Is Modulated To Ensure That It Does Not Affect Long-Term Use. The Surface Is Black And Rust-Proof. There is No Need To Worry About The Wrench Slipping Off During The Installation Process With Customized Flange Nuts!.
【COMPATIBLE WITH CHEVROLET GM LS & LT SERIES 】—Harmonic Balancer Installation Tool Suitable For Camaro, Corvette, Trans Am, GTO, G8, LS Truck Or LS Power Road Signs. Compatible With All GM LS And LT Series Engines From 1997 To The Present (Third, Fourth And Fifth Generations). You Can Also Search For Matching Models Through Amazon To Purchase!.
【 INSTALLATION AND REMOVAL 】— Can Be Screwed Completely Into The Crank, Just Slowly Twist The Nut Until The Pulley Is In Place. The Upgraded Wrench Plane Is Convenient For Disassembly Without Worry，This Is Required For Engine Replacement Or Balancer Upgrades. A Little Lubricating Oil Will Make It Smoother When Using!.
【 PACKAGE INCLUDES 】— 1*Stud, 2*Washer, 1*Thrust Bearing, 1*F....

Check Stock

Shorty's Skate Tool The Wench

Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..

Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

[Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
[Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
[Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
[Built to Last] Heat-treated carbon steel ensures maximum strength.
Chrome and black oxide finishes resist rust and corrosion.
Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
[Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....

Check Stock

aremnry 25264 GM Harmonic Balancer Puller Crank Pulley Puller Automotive Replacement Engine Quickly Removes Harmonic Balancers without Tapped Holes

【Easy to Use】 aremnry harmonic balancer puller saves your time by safely and quickly removing balancers without tapped holes, making a difficult job much easier. No need to remove the radiator!.
【Benefits of Tools】 The tool has sufficient weight and strength to ensure that it will not break during use. Made of special carbon steel, the surface is sprayed with anti-oxidation and corrosion paint, corrosion resistant and very durable..
【Unique Design】 Harmonic Balancer Puller features a "clip-in" design allowing removal without bolting the puller to the balancer. Compatible with Jeep/GM/Chrysler/Dodge balancers without threaded holes..
【Applications】 GM APPLICATIONS: 5.3 L, 5.7 LS1, 6.0 LS2, 6.2 LS3, and 7.0 L.
CHRYSLER, JEEP, DODGE APPLICATIONS: 3.5 L V6, 3.6 L V6, 4.7 L V8, 5.7 L V8, 6.1 L, and V8..
【Not Fit】 Not applicable to 1997 or earlier GM LT (5.7L LT1003c4) series engines (with threaded holes), and does not apply to 2018+ Ford 5.0 engines and newer Coyote balancers. Also will not work with the truck pulley. If you have any question, please feel free to let us know..

Check Stock