Reviews Hantek Dso5202p 20mhz 2ch Digital Oscilloscopes

Goupchn High Voltage Oscilloscope Probe P4100 with Accessory Kit 100MHz 2000V 100:1

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • High voltage probe can withstand 2000V. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • High voltage oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 1 x probe, 8 x marker rings, 1 x ground spring, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock

Oscilloscope Multimeter, 2-in-1 Intelligent Digital Scope Meter Multimeter, Professional LED Handheld Oscilloscope Multimeter with 200ksps A/D Automatic Waveform Capture Function

  • DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

Goupchn Universal P6100 Oscilloscope Clip Probes 100MHz with Accessories Kit 1X 10X 2 Pack

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock

Goupchn Oscilloscope Clip Probes 200MHz Fully Insulated BNC End Probe with Accessories Kit 1X 10X

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 16 x marker rings, 2 x ground wires, 4 x locating sleeves, 1 x adjustment tools, 1 x ground springs, 1 x user manuals, 1 x oscilloscope link adapters..
Check Stock

Hantek PP80B 2pcs Oscilloscope Scope Clip Probe 1x:10x Oscillograph Rapier 80MHz

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 200MHz,Usable with Scopes having Bandwidth up to 200 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

DSO138 Oscilloscope, DIY Mini Oscilloscope DSO-138, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K (Welded Version)

  • 【WIDELY USE】DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay). Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • 【EXCELLENT QUALITY】This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • 【PRODUCT FEATURE】DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • 【NO NEED SOLDERED】DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • 【DIY DESIGN】Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

iArkPower HDMI Audio Extractor Splitter HDMI to HDMI + Optical + RCA L/R Stereo Audio Out Supports 3D (1080P)

  • Extract Audio from HDMI: One HDMI Input to One HDMI Output, One SPDIF Audio Output and One RCA R/L Stereo Audio Output. Note: DO NOT plug TV to HDMI IN port because TV’s HDMI ports do not send out signal.
  • A Perfect Solution: Designed to split 5.1CH/2CH audio from HDMI device like PS3/4, Chromecast, Blu-ray player, cable box, Fire TV, Apple TV, etc. Perfect to use if your receiver/sound bar/surround system does not have HDMI input. Note: Not support HDMI ARC (Audio Return Channel).
  • Three Audio EDID Settings: 2CH, 5.1CH and Pass for different configurations. Optical SPDIF Output supports incoming 2CH PCM, 5.1CH Dolby Digital, DTS (Note: Not support Dolby Digital Plus, Dolby TrueHD and above).
  • RCA L/R Output supports incoming 2CH PCM stereo audio.
  • Premium Quality: Supports Full HD 1080P, 3D and 36-bit deep color with sync sound.
  • made by metal enclosure for excellent heat dissipation and longevity.
  • Packing & Warranty: 1x HDMI Audio Extractor Converter, 1x 5V/1A (support 100V-240V input) power adapter, 1x User Manual.
  • Plug and Play & One year hassle free warranty.
Check Stock

AUTOUTLET P6100 Universal Oscilloscope Probe with Accessories Kit 100MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

  • Universal Oscilloscope Probes 10:1 and 1:1 Switchable Bandwidth 100MHz.
  • Usable with Scopes having Bandwidth up to 100 MHz.
  • Interchangeable Probe Tip. High Sensitivity, Excellent Performance and Reliable Function.
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

OWON Oscilloscope HDS272 2 in 1 2CH Digital Handheld Oscilloscope Multiumeter 3.5\ LCD 70MHz Bandwidth 20000 Counts Multiumeter OSC+DMM+for Automobile Maintenance,Power Detection

  • Parameter---HDS272 3.5 inch LCD automotive oscilloscope with 2 channel (oscilloscope+multimeter), 70MHz bandwidth, 250MS/s sample rate, 8K record length.
  • 2-in-1---2CH digital oscilloscope with 2 in 1 function, portable oscilloscope built-in multimeter is very handy. You can work well done with one device for your jobs or your experiments. At the same time, its detection date is very accurate, 20,000 count DMM, Scope update rate at 10k/s, perfect ranges of sweep time and vertical scales..
  • Crisp and Portable---Crisp and bright 3.5 inch color LCD screen, showing a higher resolution larger character display, even though in dim ambient light situations or outdoor environment, digital oscilloscope can be intuitive in its read. This handheld oscilloscope is portable and comfortably fits in the hand. It is much lighter, easier and perfect for field use. Practical and intuitive menu page layout, it is intuitive and handy in its use..
  • Excellent battery life---Power by standard 4400mAh 18650 Lithium battery, portable oscilloscope can work continuously for about 6 hours, a single battery can supply power normally, which are....
Check Stock