Reviews Hanger Bolts And Screws

Hang It Dang It C3563 Adjustable Quilt Hanger, 35" to 63"

  • Amish Made Wooden Quilt Display Rack: The Rustic Red Door blanket rack is hand-crafted with great care and made in the USA to ensure the highest quality. This quilt hanger for wall for display is crafted from solid oak wood and is the very best way to display that family heirloom quilt!.
  • Secure Clamps: These handmade quilt wall hangers have the highest quality clamps to protect your great-grandmother’s precious handiwork. Our wooden quilt hanger has a groove in the wood to ensure your quilt hangs straight, while the pinch bolts provide a tight grip on the quilt without damaging it..
  • Easy To Use & Hang: Compared to others, this quilt hanger for wall for display is an easy one to install. Each wall hanger for quilt includes screws for hanging. - quilt shelves and clamps.
  • Multiple Sizes & Wood Options: These rug clips for hanging rugs come in a variety of woods, sizes, and stains so you can choose the one that fits your quilt or décor the best! This quilt clamp for hanging has 3 wood choices: Oak, Cherry, and Brown Maple, a variety of stain options, and range in sizes from 30”, 36”, 42”, 48”, 54”, 60”, 7....
Check Stock

Crib Screws Parts Replacements - M6 Baby Bed Crib Bolts and Barrel Nuts for Furniture Bed Cot Bunk 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm Crib Bolts

  • This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost 1 or 2 baby bed bolts or nuts, this kit is your choice. ..
  • This crib screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts and 3 size barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) and one free hex key..
  • Our crib screws bolts and nuts are universal, they are made of carbon steel, they are solid replacements parts for most cribs [but not for all cribs], beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. (for Woodwork Only).
  • Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
  • Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to confirm the right size you will need,.
Check Stock

SFEEEXUN Heavy Bag Ceiling Mount Bag Bracket, Punching Bag Swivel Hanger for Boxing Bag Yoga Hammock Chair Swing Include 2 Screws for Wooden and 2 Expansion Bolts for Concrete

  • 【PREMIUM MATERIAL】- Made of high-quality 304 stainless steel, the punching bag hanger is anti-rust, corrosion-resistant, capable of withstanding bad weather. Easily supports heavy bags up to 1000lb..
  • 【EASY TO INSTALL】- Heavy duty heavy bag hanger is easy to install, including 2 screws for wood(Style C not include), 2 expansion bolts for concrete(Style C include 4 expansion bolts) and 1 carabineer for more secure mounting. Can be installed in a few minutes..
  • 【360-DEGREE SWIVEL】- 360-degree swivel is designed for hanging bags(Style B and C can’t swivel), helping to lessen the stress on the punching bag mount and add extra support. The swivel chain can turn side to side without getting tangled up..
  • 【WIDELY USED】- Punching Bag Holder Fits indoor & outdoor, works well on a concrete ceiling or wooden beam, good for kick Boxing, Muay Thai Bag, hammock swing kit, suspension straps & resistance trainers, Battle Ropes, Yoga Swings, etc..
  • 【100% SATISFIED】- If you are not satisfied with this heavy bag bracket, please feel free to contact us, we will try our best to make you satisfied..
Check Stock

Crib Screws and Bolts Replacement Hardware Kit - Baby Bed Screws 85mm 75mm 70mm 55mm 50mm 45mm 40mm 30mm 20mm 16mm M6 Replacement Bolts Barrel Nuts for Baby Toddler Bed Crib Furniture

  • Crib blots and screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts + 3 sized barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) + one free hex key..
  • Our crib screws bolts and nuts are made of carbon steel, they are solid replacements parts for most cribs, beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. 【NOT for all cribs, Please Check Your Crib Assembly Instruction and Compare Bolt Sizes and Lengths to See if This Kit Will Work】.
  • This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost some bolts or nuts, this kit is your choice..
  • Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
  • Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to con....
Check Stock

4 Inch Wooden Furniture Legs, Tchosuz Set of 4 Solid Wood Pyramid Sofa Legs Couch Feets with 5/16 inch Bolt & Rubber Floor Protectors & Screws, Mid-Century Furniture Replacement for DIY Ottoman Black

  • ..., make you easy to clean the place under the furniture.
  • Or upgrade your furniture and your home's style to a modern look in minutes, giving your furniture a restyling has never been easy or more affordable!.
  • SUCH EASY INSTALLATION - There is a full hardware kit contains 4 furniture legs with pre-installed 5/16’’ hanger bolt, 4 insert nuts, and enough screws, you only need a screwdriver to install these replacement legs within 3 mins. Each wood leg also comes with a rubber protector! Use them to protect the floor from damage to the feet, or as an additional stabilizer for your tables or chairs..
  • 5/16’’ HANGER BOLTS - Tchosuz replacement feet are pre-drilled 5/16 inch threaded bolts, which will fit most furniture. Please kindly pay attention, if our furniture legs do not fit into your old furniture attached with different bolts, please don’t worry, you can use our Insert Nuts to screw in the legs..
  • MEET EVERY DEMAND - Match other kinds of hardwoods to ensure compatibility with a wide variety of furniture like couches, sofas, chairs ottomans, and so on..
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate 5/16\ (M8) Sofa Legs with Hanger Bolts,Screws,Strengthen Weak Furniture Repair Damaged Sofa Couch Seat,Set of 4

  • Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. Standard Legs by simply attach these mounting brackets with the over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • ...s to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

Artilife 4 Pack Acrylic Furniture Legs Tapered Style Acrylic Furniture Legs Replacement Sofa Feet Replacement Legs for Bed,Sofa,Table (7.87\/200MM)

  • 【High Quality】The furniture legs are made of high-quality Acrylic. The transparent sofa legs can be adapted to any decoration style. Brighter color, stable support and durable..
  • 【Universal Fit】Includes mounting screws and pre-installed 5/16 inch standard hanger bolts. It fits perfectly with your furniture..
  • 【Replacement Feet】Acrylic Furniture Replacement Cabinet Tapered perfect fit for coffee tables, cabinets, chairs, sofas, dressers, beds,couch, sideboard and other furniture..
  • 【Package Include】4 Pack 7.8 inch height Clear Acrylic Sofa Legs with mounting screws..
Check Stock