Reviews Handwheel Knife Gate Valve

awagas 8\ x 8\ Lab Scissor Jack, 200mm Stainless Steel Laboratory Lifting Platform Lab Lift Table Lab Jack Stand Rack Scissor Lab-Lift Lifter, Height Range from 85mm to 280mm Load Capacity 15Kg

  • ...se plate 200*200mm. The maximum load capacity is 15KG..
  • ❥【NOTE】100% brand new. There is a protective film on the surface of the product, PLEASE peel off the protective film before use! The protective film of the product may be warped or burrs, but it does not mean that the product has been used. Tightening the handwheel helps to maintain stability. But pay attention to the rotation force, and avoid excessive force causing the handwheel to be unable to tighten..
  • ❥【DURABLE AND ANTI-CORROSION MATERIAL】Lab lifting platform is made of sturdy and high-quality stainless steel material, anti-rust and corrosion resistant, strong and durable. Stainless steel top and bottom plate is NOT magnetic, galvanized iron stand is magnetic. The platform is flat, and the edge is not sharp..
  • ❥【STEADY HEIGHT ADJUSTMENT】Stainless steel laboratory scissor jack has a very firm and steady base and a stable structure, which makes the lifting very steady and not easy to shake! The lab lifting platform is composed of an upper panel, a lower base plate, a rotating shaft, and a handwheel. Place the lifting platform steadily, and rotate the handwheel to adjust the upper panel of the lifting platform to the desired height..
  • ❥【WIDE RANGE OF USES】The laboratory lifti....
Check Stock

Spears P106 Series PVC DWV Pipe Fitting, Cleanout Plug, 8' NPT Male

  • APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
  • KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
  • SPECIFICATIONS: Maximum Pressure 6psi Open/10psi Closed - PVC with female Slip/Hub fittings which receive 8" PVC pipe.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

Mr. Heater Handwheel

  • ALUMINUM ALLOY MATERIAL: This handle is made of high quality aluminum alloy, which is thick and durable. The handle can bear the pressure of hand pressing and not easy to be worn out..
  • EASY TO STORAGE: This black hand wheel is easy to fold and store without taking up too much space. The handle is made of reinforced nylon, which is more antiskid..
  • CONFORTABLE TO USE: The surface of hand wheel is smooth and comfortable. This foldable handwheel can bring you a better work experience, let you work more comfortable..
  • CONVENIENT OPERATION: This aluminum alloy hand wheel shank has smooth surface, flexible rotation and convenient operation. This hand-wheel is mainly used for processing cutting tools..
  • NICE HANDWHEEL: A good accessory to replace your old or bad hand-wheel, let you get rid of the trouble of machine parts difficult to use..
Check Stock

Valterra 10" PVC Gate Valve - Slip Hub Fittings with Stainless Steel Paddle

  • APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
  • KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
  • SPECIFICATIONS: Maximum Pressure 6psi Open/8psi Closed - PVC with female Slip/Hub fittings which receive 10" PVC pipe.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.
Check Stock

Enhon 2 Set Tub Spout Diverter Repair Kit, Includes 2 x Diverter Valve Stems, 2 x Cup Seals and 2 x Gates, Bathroom Shower Bathtub Leaky Faucet Repair Replacement Parts Replace

  • ...take our shower tub spout diverter gate and place the cap seal into the spout gate.
  • Third, put the bath diverter gate with the rubber washer into the tub spout.
  • Last, place the lift rod into original place.
  • Package Includes: the tub spout diverter kit includes 2 x diverter valve stems, 2 x diverter gates and 2 x diverter cup seals totally.
  • When you pull on the diverter knob that is supposed to stop the water from flowing on the top spout and instead divert the water flow up to and the shower head.
Check Stock

Upgraded Mini Lathe 7\X14\

  • ...iron with a powerful lathe motor:550W. High grade iron construction makes it more sturdy during turning, drilling, threading and cutting processing.Two rails provides smooth and durable moving..
  • 【NEW UPGRADE DESIGN】-This upgrade mini lathe uses metal gear instead a nylon one,increase service life.Adopts aluminum handwheel is more durable than plastic handwheel,and not easy to be damaged.Digital display screen is convenient for you to follow up the processing.Add automatic power-off protection switch to make the operation safer.An extra lamp can help you finish processing in places with insufficient light.We provide one extra gear belt and free 7PCS lathe carbide tool..
  • 【PRECISION DESIGN】-Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). A accurate self-centering 3-jaw is supplied,for holding a variety of round or square cylindrical materials stability.The metal lathe features forward and reverse design. The variable speed of MT4 Spindle range 0-2500RPM, two speeds are available for meet your different metal workings: Low Speed 0-1250RPM, High Speed 100-2250 RPM..
  • 【PROFESSIONAL COMPOUND REST】-4-way quick change tool post  can install 4 common turning tools at the same time.....
Check Stock

Aupoko Propane Refill Adapter Hose 36’’ Propane Refill Hose with POL Type 1LB Tank Bottle Adapter and ON/Off Control Valve 350PSI Rated High Pressure Propane Extension Hose

  • Perfectly replace the 16.4 oz/1 pound small propane tank-connect the 1 pound propane equipment directly to the 5-100 pound internally threaded propane....
  • Out of the box-no need to purchase additional regulators, directly connected to gas grill, camping stove,griddle,outdoor heater, trailer, propane....
  • 1lb Propane refill adapter-add a 1lb inflation valve, suitable for all small cylinders of 1lb tanks, fill 1lb cylinders with gas from large tanks,....
  • Easy to install-don't need any tools, just use your hands, follow the instructions on the handwheel and turn it counterclockwise, you can easily....
  • 100% after sales service-If it is found to be unsuitable after purchase, or damaged in transit, you can get a 100% refund service, please rest assured....
Check Stock

Camco 39509 Sewer Waste Valve Extension Rod - Extends the Handle of Your RV Waste Valve, Compatible With Most Standard RV Waste Valve Gates

  • Extends the handle of your RV waste valve (6″ to 8″ and 9″ to 11″).
  • Each extension adjusts 2″ with threaded stud.
  • Compatible with all Camco Waste Valves and other standard waste gate valves.
  • Aluminum tube easily threads onto valve shaft for easy installation.
  • Includes UV-stabilized handle and mounting bracket.
Check Stock