Reviews Handle Toggle Clamps

Accessbuy Heavy Duty Adjustable Toggle Latch Clamp 4003 Style,1320Lbs Holding Capacity, Large Toggle latch Hasp Clamp For Smoker,ToolBox Case,Industrial EquiIpment and More (7.5inch)

  • MATERIAL:Our toggle latch clamps are made of 4mm thick carbon steel, very strong,durable and sturdy. And galvanized coating makes it anti-rust,anti-corrosion and waterproof..
  • ADVANTAGES: This latch action toggle clamp is adjustable. Just simply turn the adjustment lever so that you can make it tight or loose. Adjustable distance2.6 inch- 3.3 inch. Holding Capacity: 1320Lbs. With lock hole..
  • EASILY INSTALLED: Just fix it with screws or weld, and then turn the adjustment lever to adjust a proper distance..
  • MUTIPLEPURPOSEThis lockable heavy duty toggle latch clamp can be used in many situations. Such as locking doors, cabinet doors, storage boxes, toolboxes, cases, smoker lid, making jigs, tool fixtures , and etc..
  • PACKAGE2 packs included. If theres any problem, please feel free to contact us, we will give you a replacement or refund your money back within 30 days!.
Check Stock

PRO ART - 3078 Pencil Set Sketch & Draw, 9.38\ x 9.38\ x 0.25\

  • Holding and toggle clamps included to keep wood steady and ensure precise cuts every time.
  • Additional two sharpeners and two erasers.
Check Stock

Gravity Tilt Deck Kit with Cylinder Assembly for Trailers

  • Tilt deck kits make loading and unloading of your trucks, tractors, and equipment of any type much easier. No heavy ramps to raise or lower. Drive on and you are ready to drive away..
  • Tilt deck kit comes complete with the hoses and cylinders assembled and oiled, hydraulic fittings, two cylinder supports, two toggle clamps, two hinges, and safety signs..
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

6 Pcs Hand Tool Toggle Latch Clamp, 201B Quick Release Horizontal Toggle Clamp with PVC Non-Slip Hadle, Stainless Steel Toggle Latch for Woodworking, Welding, Mechanical Operations,220 Lbs

  • [Corrosion-Resistant High-Quality Materials] Our hand tool toggle clamp is made of stainless steel. The cold-rolled steel surface is electroplated and anti-rust treated, which has high hardness and corrosion resistance..
  • [Four-Link Dead Point Structure] The toggle clamp adopts a quick clamping and quick opening structure designed by the four-link dead-point principle, which is flexible and smooth without slipping. Maximum clamping force is 90kgf..
  • [Robust and Stable Design] The clamping base is designed with reinforced ribs, which is firmer in use and the clamping is more stable. The adjusting shaft is made of stainless steel with high bearing capacity. 85° bar opening angle, 60° handle opening angle..
  • [Comfortable PVC Rubber Sleeve Handle] Our toggle latch use high temperature die-casting PVC handle rubber sleeve, which is non-slip, abrasion resistant and does not hurt your hands, make it easier, comfortable and safer to use manually..
  • [Wide Application] The hand tools toggle have the advantages of accurate positioning and fast loading and unloading. They are ideal choices for vehicle manufacturing, electronics, furniture and other industries..
Check Stock

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers

  • ...s Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project.
  • Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
  • Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
  • Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clam....
Check Stock

Bonost 48 Pcs Toggle Bolts - 1/4 3/16 1/8 Inch Butterfly Toggle Anchors for Drywall - Toggle Bolt Assortment Kit with Matching Wing Nuts Hex Nuts Washers

  • 【What You Get】: 48pcs toggle bolts and wing nut kit, including 1/4-inch: 12pcs, 3/16-inch: 16pcs, 1/8-inch: 20pcs. We also provide matching hex nuts and washers, making it easier for you to hang mirrors or pictures..
  • 【High-quality Material】: Made of premium carbon steel, these toggle bolts for drywall are corrosion resistant, durable enough to meet different occasions. Zinc coatings make the toggle bolts have a longer service time..
  • 【Easy to Install】: 1. Drill a hole required for installation.
  • 3. Place wing unit on toggle bolt. Thread the bolt to a depth of about four or five threads.
  • 4. Install your toggle bolt and then tighten the fastener clockwise..
  • 【Wide Applications】: Butterfly anchors for drywall have spring-loaded wings that open inside the hollow wall, dispersing the weight of the secured item over a larger area. Widely used in hollow block, gypsum wallboard and more..
  • 【Durable & Sturdy Case】: Comes with no-mix compartments and carrying handle, the case is easy to carry and store toggle anchors. Made of durable construction and heavy duty material, the case offers long-lasting usage..
Check Stock

CUKAYO 2pcs Toggle Latch Clamp 4001 Adjustable 304 Stainless Steel Pull Hasp Latches Quick Release Hand Tool Toggle Clamp for Smoker Lid Jig,Case Trunk,Door,220Lbs Holding Capacity

  • [100% 304 STAINLESS STEEL MATERIAL] Our toggle latch clamp Made of solid 304 stainless steel, Corrosion resistant, anti-rust and ultra....
  • [HOLDING CAPACITY] 100KG/220Lbs, Toggle clamps maximum overall length is 4.33” with adjustable pull bar. lock up range from 3 to 4.33 inches....
  • [EASY TO INSTALL AND ADJUSTABLE] Just fix them on the cabinet door or box with screws, Our Adjustable pull latch very easy to install.and you can....
  • [WIDE APPLICATION] 4001 Pull latches can be widely used in cabinet doors, storage boxes,tool boxes, cases,smoker lid,making jigs,tool fixtures,....
  • [PACKAGE INCLUDED] 2 Pcs quick Release Pull latch. If you have any problem at all, please contact us so that we can resolve your problem..
Check Stock

Jorgensen 24 One Hand Clamp/Spreader - 2-pack Medium Duty E-Z Hold Bar Clamps Set

  • Reach: 3-1/3” from the edge of the bar to center-line of the screw.
  • Bar: 1/4”*3/4” plated, round-edge, high-carbon steel..
  • E-Z HOLD II Design- These versatile clamps can be easily converted into spreader clamps and allow two clamps to join to make a clamp with more than double the opening capacity of a single clamp..
  • One-Handed Clamp- These bar clamps combine the speed and ease of single-handed use, with 3-1/3 inch reach, and are furnished with soft and durable plastic pads. As a “standard,” quick-acting, one-handed clamp, the patented, innovative sliding head maintains substantially higher clamping forces..
  • Features- The contoured comfort grip and quick-release lever make it simple to get a firm grip in a flash. The unique in-line advancing handle provides comfort and ease of use, permitting more significant travel per squeeze. These special bar clamps are some of our easiest-to-use clamps and are ideal for hobby, craft, and model projects..
  • Suitable for a wide range of woodworking..
Check Stock