Reviews Hand Tool Screw Jack

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor ja....
Check Stock

MLLIQUEA Scissor Lift Jack for Car with Hand Crank/Wrench/Lug Wrench, Lifting Jack Kit Max 3 Ton Capacity, Ratchet Handle Tool Saving Strength Design, Oversized Bas(qianjinding-11-3)

  • Specifications-Maximum lifting weight: 3 tons (6,614 pounds).
  • lifting operation distance from 4.1 inches to 17.3 inches..
  • Intelligent mechanism-two operation methods: the scissor jack is equipped with labor-saving hand cranks and a ratchet and labor-saving wrench for opening and closing the scissor jack.
  • it will help you use 2 handle tools to lift the vehicle faster, effectively reducing 90 percent percent The amount of work required to lift the vehicle..
  • Tire socket wrench tool-The jack is equipped with 1 socket drill adapter and 2 CR-V sockets ((17/19 mm, 21/23 mm)) for loosening or tightening nuts. The telescopic handle can be extended to 19 inches for maximum leverage..
  • Bring your own bag-Bring your own carrying bag, which is more convenient to carry and the packaging is more compact. Including: 1 3ton jack.
  • 1 socket drill adapter with 2 CR-V sockets.
  • Note-Do not use on sloping ground, be sure to use on flat roads. The jack is only used as a tool to lift the car, not as a tool to support the car.
  • 1 year , if you have any questions, please feel free to contact us..
  • Guaranteed purchase-We know that you have many choices here, but please believe that our quality is firs....
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor....
Check Stock

BAOSHISHAN 4 Ton Bottle Jack Double Ram 6-1/4\ to 15-3/8\ Lifting Range Hydraulic Jack Car Jack Portable with Carrying Case

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 4 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/8"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 4 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or ma....
Check Stock

BAOSHISHAN 3 Ton Double Ram Bottle Jack 6-1/2\ to 16-1/2\ Lifting Range Portable Hydraulic Jack with Carrying Case

  • [HIGH LIFT] - This high lift bottle jack have a double ram design with extension screw. The car jack fully extends up to 16.54" on the basis of constant capacity and volume. The double extending ram makes it easy to put the jack in place and it extends enough to easily raise the high clearance cars..
  • [DOUBLE RAM] - The double-ram design means you can get it into places where a traditional 2-4 ton jack would fit, but you have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height. Combined with the extension screw, this fully extends to over 16 inches (about 10" of total lift)..
  • [WITH CARRYING CASE] - The bottle jack with case is easy enough to store away in the vehicle or garage. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it. And the color of the compact box is random, BLACK or GRAY..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack to lift cars. It allows the hydraulic jack to be adjusted to accommodate desired work height. The diameter of the top is 0.8 inches..
  • [STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 ....
Check Stock

DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

  • ... Easy to Operate: The ball joint service auto tool kit is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. .
  • Wide Compatibility: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four wheel drive (4WD) vehicles, as well as lightweight pickup trucks with press fit ball joints. The 4WD ball joint service kit allows service for 1967 to present 1/2 and 3/4 ton four-wheel drive vehicles with Dana 30 or 44 front axles (compatible with Ford, General Motors, Dodge, IHC, and Jeep vehicles)..
  • Package Included: 1 x Ball Joint Press (C-Clamp), 1 x Jack screw (Forcing C-Screw), 1 x Installation Adapter, 1 x Removal Adapter, 1 x Installing Cup, 1 x Receiving Cup, 1 x Installation Cup Adapter, 3 x Receiving Tubes.
Check Stock

Auto Jack Ratchet Handle, Auto Labor-Saving Jack Ratchet Wrench with Long Handle, Scissor Jack Lift Speed Handle Tool Jack Lug Handle Tool Tire Wheel Jack Wrench, Universal 360° Swivel Car Repair Tool

  • Jack Screw Set: With a weight capacity of 1000 pounds, the bases can be stacked and combined for cylindrical applications or narrow edges and slots.
  • Extendable Base: Includes 1" and 2" extension bases that can be combined.
  • adjustable with the pivotal top or a single contact point extension.
  • Dimensions: Machinist jack screw set has a range of 2.25" to 3.375" before extension use.
  • Set Includes: Screw jack set includes screw jack, two optional bases, 1" and 2" extension, locking bar, optional support and fitted case.
Check Stock

CFYUSEU Scissor Lift Jack Max 3 Ton Capacity with Jack Socket Drill Adapter, Lifting Jack Car Kit with Wrench/Lug Wrench for Car SUV MPV, Black, QJD-3-1

  • Come with 17mm Socket Drill Adapter: The 3 tons jack will come with a 17mm/0.67inch socket drill adapter, reduces time and effort to raise or lower your scissor jacks, only takes about 5 seconds..
  • Two way to handle: The scissor car lift jack comes with socket drill adapter and ratchet wrench to put the scissor jack up and down. It will help you lift your vehicle more quickly with 2 handle tools..
  • With Lug wrench: The lift jack comes with 1 x telescoping lug wrench and 2xCR-V sockets(17/19mm,19/23mm) to loosen or tighten the lug nuts.Telescoping handle extends to 19 inches for maximum leverage..
  • Come With bag: With the carry bag, Making your carrying more convenient and making the package more compact. Includes: 1x 3 tons jack.
  • Lift Range & Note: Lifting range from 4.1 inches to 17.3 inches.
  • Maximum lifting weight: 3 tons. The jack is only used as a tool for lifting the car, not as a tool for supporting the car. 1 year warrnty, if you have any questions, please feel free to contact us..
  • Included components: Jack Socket Drill Adapter, Lifting Jack Car Kit with Hand Crank/Wrench/Lug Wrench.
Check Stock

BAOSHISHAN 3 Ton Bottle Jack Double Ram 6-1/2\ to 16-1/2\ Lifting Range Hydraulic Jack Car Jack Welded Bottle Jack Portable with Carrying Case

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 3 ton bottle jack. You have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height..
  • [BETTER RANGE OF MOTION] - The 6-1/2" starting height allows small bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 16-1/2"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 pounds, the compact bottle jack with high-quality alloy steel structure to ensure qua....
Check Stock