Reviews Hand Operating Pressure Pump

Graco TC Pro Cordless Airless Paint Sprayer

Size (INCHES):Max tip size .016 Depth 5.3125 Height 12.0625 Width 15.5625 Compatible w/ Exterior + Interior Paint,Primers,Stains Cup capacity (oz.) 32 Flow rate (gallons per min.) .2 Included Case Included,Pump Preserver Fluid,Spray Gun Tip Included Interior/Exterior Exterior,Interior Number of Spray Settings 99 Operating Pressure (psi) 2000 Low Overspray,Pressure Relief Valve Cordless Product Weight (lb.) 10 lb Spray Tip Pattern Size (in.) 10(in) Spray Tip Size 514 One Finger Trigger.

...ication: This high-pressure hydraulic air-powered pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single-acting ram applications. An ideal all-around power source and a great unit for use with a wide variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI..

Complete accessories, with everything you need, including: water pump speed switch, filter, hose clamp, interface nut.
12V/5A DC water pump, 4.5 L/Min (1.2 GPM) water flow, when connected to the speed switch, water pump switch control and water flow adjustment can be realized, providing stable flow in all operating ranges, while consuming low current(Load 1.8-3A).
Inlet and outlet: pipe thread connection, 3/8 inch hose barb port, vertical suction force of 6.6 feet (2m). The pump has a self-priming function to prevent liquid from flowing back. The pump can be installed above the water tank. Do not immerse the pump in water..
With built-in pressure protection switch, automatically cut off the pressure, the maximum pressure is 100PSI (7BAR). It can automatically stop protection when overpressure, and automatically restart when the pressure is lower than the threshold.
Durable soft rubber feet can provide good vibration cushioning and reduce noise. High performance, corrosion resistance, good sealing, long service life, widely used in RV camper, water taps in the boat, household water supply, caravan, lawn and garden sprinkler, spray device, cleaning equipment.

10,000 PSI for Wide Application: This hydraulic pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single-acting ram applications. It is a great unit for use with a wide variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI..

This pump can be barrel, cart or wall mounted.
A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.

【HIGH QUALITY MATERIAL】- The first grade pipe of the high pressure hand pump is made of stainless steel and the second grade pipe of the pcp air pump is made of aluminum-magnesium alloy which has the characteristic of high hardness and lightness. It can reduce friction when you pull the air hand pump..
【NEW DESIGN】- Compared with the traditional 3-stage hand pump pcp, the 4-stage airgun pcp pump has great advantages: it can save at least 25% of the force and lighter than a 3-stage pump. And it carries with various connectors, easy to use..
【EASY-TO-READ PARAMETER】- The pressure gauge is made of high quality stainless steel, the measure range of which is 0-6000Psi and working pressure is 0-4500Psi. Accurate display, explosion-proof pressure protection, safe and assured..
【WATER-OIL SEPERATE FUNCTION】- Built-in double-deck oil and water separation tool, Made of aluminum alloy, Internal use of imported filter element, well filtration, the air is pure and breathable. It can reach 90 percent effect of water and oil separation, and it can be used over and over again..
【WIDE APPLICATION】- The air hand pump can be applied in various occasions. For example, most PCP pistols, rifles and air guns, soccer, inflatable boat, cars and etc..

High-pressure, lightweight hydraulic hand pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately).
Glass-filled nylon reservoir and nylon-covered aluminum base provide corrosion resistance and are lighter than steel hydraulic hand pumps.
Internal pressure relief valve protects against overloading the pump.
Two-speed operation requires fewer handle strokes than single-speed hydraulic hand pumps.
First-stage pressure rating of 200 psi and second-stage pressure rating of 10,000 psi.

... Scenarios】-The air hydraulic pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications. Pump, hold, or release load using simple pedal control - great unit for use with a wide variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI.

... Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
Easy-to-use: Includes a variety of adapters ideal for most vehicles.
4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
Extra-long rubber hose and 14mm/18mm manifold adapter.
Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Package Included: (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male ....