Reviews Grip Puller

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
Check Stock

ABN Bolt Grip Set – Gear Puller Steering Wheel Puller Pulley Puller Harmonic Balancer Puller Crank Puller 43pc

  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool.
  • Can also handle 2 and 3-way bolt pulling applications.
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm.
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Compartments include sizing labels for easy identification.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience.
Check Stock

8MILELAKE 6pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller

  • [APPLICATION] : This front end service tool allows for easy removal of most popular types of pitman arms, Tie Rods and Ball Joints.
  • [FEATURES] : Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • [ALL IN ONE] : This Ball Joint Separator, Pitman Arm Puller Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x plastic carry case..
  • [DURABLE MATERIAL] : Durable heavy duty forged front end service tools constructed from heat-treated alloy steel with anti rust plating finish. the jaws are shaped to ensure a positive grip, which leaves your hands free for the pulling job..
  • [PORTABLE CASE] : A plastic carry case is included, keep your tool parts well organized, easy for storage and carry out.
Check Stock

Guitar String Winder String Cutter and Pin Puller 3-in-1 Guitar Tool Guitar Repairing and Adjustment Tool for Acoustic and Electric Guitars - 2 Pack

  • GRIP Winder's patented innovative dual bearing construction for effortless, silent & super fast winding combined with safe scratch-free & clank free rubber lined design that works on Electric, Acoustic, Classical and Bass Guitars.
  • GRIP Winder fits virtually all tuning pegs and narrow profile keeps your from hitting other pegs or headstock. Ergonomic handle and bonus 10mm hex wrench to safely tighten the most popular (10mm) tuning machine bushings..
  • GRIP Cutter high quality chrome vanadium steel blade is spring-loaded and comes with a convenient storage sheath when not using..
  • GRIP Cutter is perfect for cutting all string types from big bass strings to your smallest guitar string, and the ergonomic non-slip comfort grips feel so good..
  • GRIP Puller is a premium, innovative bridge pin puller for acoustic guitars. The metal free, ergonomic and clever design helps easily lift the pins..
Check Stock

OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods, 6 Piece

  • FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt.
  • Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
  • WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995).
  • EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process.
  • INSTRUCTIONS AND STORAGE CASE INCLUDED: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case.
  • Easily take this harmonic balancer puller set from job to job.
  • PRODUCT SPECIFICATIONS: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4.
Check Stock

Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1\ to 2-7/8\ IDs

  • 8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks.
  • AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
  • SEAL PULLER SET: The 5.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook.
  • BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

BTSHUB 13Pcs Slide Hammer Dent Puller Tool 10lbs for Auto Body Truck Repair

  • Heavy duty drop-forged carbon steel construction, tempered and treated with oxide to resist rust and corrosion for added durability.
  • Solid steel shaft with knurled handle for sure grip. A long shaft allows a more powerful pulling force. Perfect for both home and business. Solid steel shaft with knurled handle for sure grip and a long shaft allows a more powerful pulling force.
  • The dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
  • Versatile puller assortment lets you handle all kinds of pounding and pulling operations..
  • Comes with a portable plastic case for easy carrying. Keeps all the repair tools tidy and resist.
Check Stock

CELLBELL 3PCS Dent Puller, Car Dent Puller Remover Tool, Car Dent Repair Kit, Strong Suction Cup for Tiles, Glass Lifting and Heavy Objects Moving Orange

  • [Powerful Car Dent Puller] Our suction cup dent puller is made of natural rubber and high-quality ABS. The rubber pad seamlessly fits your car, ensuring a strong suction grip while not scratching the paint. Durable ABS can withstand great pressure, and easily pull out the dent from the car..
  • [PORTABLE DENT REMOVER TOOL] You will get 1 large car dent remover(4.5 inches) and 2 small car dent repairs(2.2 inches).Just go with this dent removal kit..
  • [WIDE APPLICATION] The suction cup is a great car dent removal tool. In addition, this suction cup dent puller is good at moving furniture, glass, tile, etc. And it can be used as the door/window handle, cell phone holder, and so on..
  • [EASY TO USE] Clean and heat the dent with hot water, start operation from the shallow concave line then press hard and make sure the suction cup fits seamlessly, gently pull the suction cup up by using the handle, the dent surface will be pulled up with the dent puller..
  • [Sturdy Suction Handle] Consists of a quick-release handle with a spring-loaded locking handle, the dent puller is ergonomically designed, which you can use with one hand, also has a precise structure that provides strong suction.
Check Stock