Reviews Green 3d Printer Power Adaptors

Noctua NF-A6x25 FLX, 3-Pin Premium Cooling Fan (60mm, Brown)

  • Award-winning 60x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • Ideal replacement for noisy or broken 12V 6cm fans in DVRs, NAS, network and storage devices, 3D printers, etc..
  • 3-pin FLX version provides 3000/2400/1600rpm speed settings via Low-Noise Adaptors to fine-tune the fan for maximum airflow or near-silent operation.
  • Includes anti-vibration mounts, fan screws, Low-Noise & Ultra-Low-Noise Adaptors, extension cable and 3:4-pin adaptor for powering the fan directly from the power supply.
  • Trusted Noctua quality with premium-grade SSO2 bearing and more than 150.000 hours MTTF, backed up with 6-year manufacturer’s warranty.
Check Stock

Chengliang Power Supplys 24v 15a 360w Dc Original Ender 3 Pro 3D Printer Switching Power Supply

  • Original creality ender 3 ender 6 3d printer power supplies 24v universal regulated output dc 24v 15a 360w 24 volt adapter.
  • Input voltage 115/230v by switch range 90-132/180-264 vac convert ac 115/230v to dc 24v 15a 360w.
  • Efficiency over 86% for 3d printer CCTV monitor led light strip industrial automation communication.
  • Smart full protections SCP OVP UVP OPP OCP OTP auto on/off cooling fan power on auto works Noise≤35dB.
  • You get one original ender 3 printer power supply CL-C360W24V-N warranty 3 years 24hrs online service.
  • Withstand 300V AC surge input for 5 seconds.
Check Stock

AMOLEN PLA 3D Printer Filament, 1.75mm, Tri Color Changing with Temperature, Pine Green to Brown to Yellow,1KG

  • ✔TEMPERATURE COLOR CHANGE - Under 30ºC it looks pine green and above that it starts getting brown, and when the temperature is above 45ºC, it starts getting yellow. Please note that this type of filaments should avoid long-time direct sunlight exposure. The longer the exposure time, the faster the color fade..
  • ✔SMOOTHLY PRINT - AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping..
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔HIGH PERFORMANCE - Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
Check Stock

ANYCUBIC Resin 3D Printer, Photon Mono X 6K 9.25' Monochrome LCD UV 3D Resin Printer, Fast Printing, Power Adjustable, Matrix UV LED Light Source, Printing Size 7.8'x4.8'x9.6'

  • 6K Monochrome Screen：9.25" Photon Mono X resin 3d printer 6K screen has super high resolution (5760 x 3600 pixels), which is about 225% higher than other 4K 3d printer resolution screen. Adopting an industry-leading screen with 350:1 contrast ratio, provides your 3D models with extremely sharp and clear edges and corners and vivid details.
  • 4X Faster printing, One Step Ahead：The Photon Mono X 6K fast 3d printer single-layer exposure only takes 1 seconds, The max printing speed of AnyCubic Photon Mono X 6K is 3.15 in./h (80mm/h), It only takes 1.5 hours to print a typical 12 cm / 4.7 in. model, which is 4X faster than ordinary resin printers, you to obtain higher quality models in a shorter time..
  • 6% High Transmittance & Higher Precision ：AnyCubic Photon Mono X 6K printer is equipped with an industry leading screen with 6% light transmittance, adopts new upgrade 40 LED matrix parallel UV light source and ≤ 44,395 lux power density, the light source is more uniform. Ahieve a high degree of detail reduction, and the screen service life is up to 2000h, more durable than ordinary color screen..
  • Larger Build Volume： ANYCUBIC Photon Mono X 6K can print up to 9.6 x 7.8 x 4.8 inches / 24.5 x 19.7 x 12.2 cm, about 1.6 gallons / 5.9 L. The amazing print v....
Check Stock

Creality Ender 3 V2 3D Printer DIY Kit Upgraded Version of Ender 3 Pro 32-bit Silent Motherboard Carborundum Glass Bed Resume Printing Build Volume 220 x 220 x 250mm Ideal for Beginners

  • Great Support, Hassle Free Purchase: Aystkniet is the authorized store of Creality 3D Official. Every 3d printer Aystkniet sells are genuine and has....
  • Reliable Printer for beginners and experts: The Creality Ender 3 V2 is an incredibly popular 3D printer because it opens the door to 3D printing at a....
  • New, improved mainboard: Compared to the previous version, the Creality Ender 3 pro v2 printer equipped with a new, improved silent 32bit mainboard....
  • No more uneven table: The Creality Ender-3 v2 3D printer is equipped with a glass table with an overlay to increase the adhesion of the printed....
  • Many More Minor Improvements: The sleek design with discretely hidden power supply, the nice blue extruder knob for easy filament feeding and filament....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Pink PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Pink PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Pink - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience),....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Silver PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experien....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm White PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm White PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: White - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Red PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), U....
Check Stock