Reviews Gpon Transceiver

Uniden PRO401HH Professional Series 40 Channel Handheld CB Radio & RoadPro (RP-711) 24\ Magnet Mount Stainless Steel CB Antenna Kit

  • VHF/UHF Commercial Grade Dual Band Handheld Transceiver - Compact Design, Measuring W 2.1” x H 4.1” x D 1.2” (52.5 x 104.5 x 31 mm) - Rugged Construction.
  • Meets IP54 Rating (Dust/Water protection) , MIL-810-C,D and E - One Watt Powerful Audio Output and Clear Audio from the Big Front Speaker - 5 Watts of Reliable RF Power within a Compact body.
  • Three Selectable TX Power settings (5 W (High)/2.5 W (Middle)/0.5 W (Low)) - Over 9 hours Operating time with Supplied 1,950 mAh Li-Ion Battery pack *1 - Optional High-capacity 2,500 mAh Li-Ion Battery Pack (SBR-26LI) provides over 11.5 hours of Extended Operating Time *1 - 3.5-Hour Rapid Charger (SBH-22) Included (Using SBR-25LI) - QRK (Quick Recall Key) : Four User Programmable Keys for Quick Access to Favorite Functions.
  • Large White LED Flashlight, Alarm and Quick Home Channel Access for Emergency Signaling - Versatile Scanning Capabilities : Programmed VFO Scan, Memory Scan, Priority Channel Scan, Weather Alert Scan - WX Channels with "Severe Weather" Alert (US Version) - VOX Operation with Optional VOX Earpiece Microphone (SSM-512B) - PC Programmable with Optional Programming Cable (SCU-35).
  • Transceiver-to-Transceiver Cloning with Optional Cloning Cable (SCU-36) - FM Broadcast Receiver Equipped - ARTS ....
Check Stock

CW QRP Shortwave Radio Kit - CW Transceiver Shortwave Radio Kit

  • ...003 multiplication detection, the sound size is adjusted by digital potentiometer and sent to audio active filter circuit. Finally, LM386 drives speaker, and if frequency supports calibration setting..
  • Use 3 bs170 parallel outputs, class E amplification, 12V power supply, output power 5W! Relay switching is used for transceiver, with the function of transmitting delay adjustment to avoid frequent relay switching and improve the isolation of transceiver channel..
  • It has the function of automatically sending call signs, which is very convenient to use. The MCU uses the original code of our store, which can adjust the code speed, sidetone frequency and sidetone size. It can input the call sign by itself (in automatic key mode) and support power down saving..
  • The PCB board of this kit can be conveniently put into the 88 * 30 * 120mm aluminum chassis (the shell needs to be prepared by itself, and the opening size of the front and rear panels is in the mesh disk). Main indicators Power supply: 12V Working current: receiving ≈ 120mA @ 12V.
  • Emission ≈ 1A @ 12V Transmitting power: 5W @ 12V Frequency range: 7.000mhz-7.100mhz, 1kHz / 100Hz step Working mode: CW transceiver, SSB receiver.
Check Stock

LC to LC Fiber Patch Cable Single Mode Duplex - 3m (9.84ft) - 9/125um OS1 LSZH - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) – LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

Backcountry Access Tracker 3 Rescue Package

  • The BCA T3 Avalanche Rescue package is a smart purchase for those looking to gear up for their first backcountry experience or for experienced backcountry travelers wanting to replace their old outdated equipment..
  • This 3-part package comes with our industry-leading Tracker3 avalanche transceiver and harness, our extendable B-1 EXT avalanche shovel, and our quick deploying Stealth 270 avalanche probe..
  • The Tracker3 has Tracker's renowned ease of use and instantaneous real-time display. The beacon is designed to be pocket-friendly, and T3 is the choice of guides, mountaineers, and the weight-conscious crowd..
  • This transceiver uses Signal Suppression (SS) and Big Picture (BP) modes for no-nonsense multiple-victim searching..
  • Motion-sensing auto revert-to-transmit mode. Upgradeable software and electronics performance testing for Tracker3 fleet management. All transceivers include harness and batteries..
Check Stock

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (1M, OM3-5Pack)

  • Beyondtech Pre-terminated connectors on both ends LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC 1 Meter LSZH Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM singlemode fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

Microsoft Wireless Mobile Mouse 1850 for Business, Black. Comfortable Ergonomic Design, Wireless, USB 2.0 with Nano transceiver for PC/Laptop/Desktop, Works with Mac/Windows Computers

  • Design is suitable for use with either hand.
  • Built-in mini transceiver (USB) storage for ultimate portability.
  • Note : In case of Wireless mouse, the USB receiver will be provided inside or along with the mouse.
Check Stock

Dakota Alert MURS Alert Probe Sensor MAPS Metal Detecting Wireless Transmitter with 50-FT Of Direct Burial Cable - Outdoor Monitoring System

  • Automatically detects moving vehicles - The Dakota Alert MURS Alert Probe Sensor (MAPS) catches any moving vehicles that drive 14-ft near or over the....
  • Never sends false alarm - The probe is only capable of detecting large metallic vehicles. It doesn't detect moving animals or strong winds.
  • Wirelessly sends alert signals to MURS transceivers - MAPS can still send an alarm message to a MURS transceiver even if the radio is 2 miles away....
  • Provides convenient power source - Four CR123 batteries power the MURS transmitter. Conveniently install it any driveway without worrying about....
  • Compatible with - Dakota Alert MURS Transceivers: M538-BS Base Station, Handheld M538-HT Wireless VHF Transceiver.
Check Stock

Antenna Combiner MX72 VHF+UHF Duplexer 144-148MHz/ 400-470MHz Different Frequency Indoor Transceiver

  • ❤️Duplexer :MX72N duplexer is a series of inductors and capacitors used as bandpass filters.Used for different frequencies and cannot be sent at the same time..
  • ❤️After-sales service: We provide a 12-month product warranty and a 30-day money-back guarantee. If you have any questions or concerns, please contact us. Our professional and reliable customer service will do our best and provide you with satisfactory solutions within 24 hours, please rest assured to buy..
  • ❤️ Two different ways：MX72N duplexer can be used in two different ways..
  • ❤️Working principle: Combine the output of the HF/VHF transceiver and the output of the UHF transceiver so that both transceivers can be connected to the same antenna..
Check Stock

HYSHIKRA VHF Marine Antenna, 156-163Mhz Rubber Boat Antenna with 5M/16.4ft RG58 Cable and L Shape Fender Bracket for Uniden Icom Yaesu Cobra Midland Radio Transceiver

  • The frequency of the antenna is 156-163Mhz, it can work for most of marine radio transceiver.HYSHIKRA always use high quality material for the antenna.It can effectively improve the communication distance of transceiver.
  • Specification Freq:156-163Mhz/Impedance:50Ohm/VSWR :less than 1.5/Gain:2dBi/Max power:50Watt.
  • Antenna Length:6.7inch Cable length:5meter(16.4ft).
  • The antenna come with antenna mount bracket, it can install on the boat easily.
  • What you get: 1pcs HYSHIKRA Rubber Marine Antenna, 1pcs Antenna Mount, 1pcs 5meter RG58 antenna cable.
Check Stock