Reviews Glock Rear Sight Tool

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Xaegistac Glock Tool Set All Metal Magazine Disassembly Tool w/Armorers Punch Tool & Front Sight Installation 3/16 Hex Tool for Glock Accessories GT08

  • HANDY GLOCK TOOL KIT: 1*Mag Disassembly Tool,1* Pin Punch Disassembly Tool,1*Glock Front Sight 3/16" Hex. Compatible with Most Glock Models. A Must....
  • HEAVY DUTY MATERIAL & STRONG HANDLE FOR A LONG SERVICE LIFE: All Metal Construction, Made From Machined Aircraft Aluminum with Steel Handle. Larger....
  • MULTIPURPOSE MAG DISASSEMBLY TOOL (MDT): Safely and Easily Removes All Flat Bottom Magazine Base Plates for Cleaning and Inspection Without Damaging....
  • GLOCK FRONT SIGHT REMOVAL & INSTALLATION COMBO Kit: 3/16" Hex Fits for Glock Front Sight Screws, Pin Punch Disassembly Tool for Removing All Pins on....
  • EASY TO REMOVE AND INSTALL : An Internal Magnet Tip to Easily Hold the Front Sight Screw Securely in Place. Solid and Perfect for Sight Removal or....
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Glock Perfection OEM Adjustable Rear Sight Fits All Models

  • Glock Adjustabel Rear Sight. Fits all Glock Pistol models..
  • Adjusts for both Windage and Elevation with a few simple turns of the adjustment screws..
  • Glock Factory OEM (OEM Bulk Packaged). Manufactured to the same exacting standards as the original, guaranteeing excellent fit and reliable operation..
  • Replace your fixed rear sight with this adjustable sight..
  • New Style (Does not extend over back of slide)..
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to ....
Check Stock

DUTRIX Glock Tool Kit,Front Sight Tool Magazine Disassembly Tool Mag Plate Removal Tool Pin Punch Tool for Glock 19 17 26 27 43 Accessories

  • COMPATIBILITY: DUTRIX Black glock tool set compatible with Standard Glock 9/40 Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41. Please note: Our tool kit does not work on the Glock 30 round magazines or extended type base plates.
  • Magazine Disassembly Tool: The easiest and fastest way to remove base plates from the standard Glock magazines without any damage to the plates and mag bodies..
  • Front Sight Tool: Magnetized tool to aid in the installation and removal of front sights on Glock pistols.It is long enough to get a grip to remove the sight..
  • Armorers Disassembly Tool: Aid in the removal of pins and base plates on Glock pistols.It is a good tool kit for Glock pistols, even handles well in smaller hands making it handy for women..
  • Easy to Remove and Install: An Internal Magnet Tip to Easily Hold the Front Sight Screw Securely in Place. Solid and Perfect for Sight Removal or Installation.Easy to carry,They can be carried in a pocket, perfect fit for travelling or on the road.1 Years Warranty: 100% Satisfaction Guarantee.
Check Stock

OneTigris Universal Sight Pusher Tool - Pistol Glock Rear Sights Pusher Gunsmithing Tools for Handgun

  • Premium Aluminum Construction – The main body of pistol rear sight pusher tool is built with heavy-duty anodized aluminum alloy for added sturdiness and durability..
  • Lightweight and Compact – Only 0.7 inches thick and weighs less than 14oz. When you’re not using it, this glock sight pusher tool is compact to save space on your desk, be stored away in a drawer, or even be taken with you to the shooting site..
  • Adjustable Module Design – Easy to use, The gunsmithing tools have vertical and horizontal adjustment modules to support the slide. and the extra metal module provides multiple pushing surfaces to accommodate a variety of sights. The large handle makes sight adjustments work more easier, so even entry-level shooters can easily use it..
  • Compatibility Information – The universal pistol rear sight pusher tool fit for square slides, not for angles or notched slides like XD, XDM or Shield..
  • What You Get – OneTigris universal handgun sights pusher *1, and our friendly customer service..
Check Stock

Aolamegs Universal Sight Pusher Tool for 1911 Glock Sig Springfield and Others Market for Front or Rear Sights

  • Universal sight tool for changing or adjusting front or rear sights..
  • Handgun Sight Tool Pusher fit for all glock models, springfields, sigs and other handguns..
  • This tool grips "all 4 sides" of the slide to keep it from trying to tilt the slide while it exerts the thousands of pounds of force required to....
  • Also fits the ones with slide mounted levers like beretta 92fs after the lever is removed..
Check Stock

Tool for Glock Tool Kit, Disassembly Tool Compatible with G19 17 25 26 27 43 Accessories

  • 【Compatibility】Front Sight Tool Kit Compatible with Standard Glock 9/40mm, Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41ect. Please note: The Front Sight Tool kit does not work on the G30 round or extended type base plates..
  • 【Magazine Disassembly Tool】 Easily disassemble the Glock Magazine for cleaning and inspection without damaging your components..
  • 【Front Sight Tool】3/16″ Magnetic Hex Driver to install and remove the front sights on all Glock. The strong magnetism keeps your screws from moving randomly..
  • 【Pin Punch Tool】 Help remove all Pins and disassemble all Glocks..
  • 【Material】Front Sight Tool Kit set for Glock made of high-quality aviation aluminum and plastic, wear-resistance and durable..
Check Stock