Reviews Generator Light Tower

30 AMP Generator Power Inlet Box, TOVEN NEMA L5-30P Power Inlet Box for 3 Prong Generator Cord, 125 Volt, 3750 Watt, Weatherproof 30A Generator Plug for Outdoor Use, ETL Listed

  • 30 AMP GENERATOR INLET BOX - 30A, 125V, 3750W generator power inlet box, compatible with all 30 AMP NEMA L5-30P 3 Prong generator cord, the max wire gauge is 10AWG. Designed to connect your home generator to your house in a safe & convenient way, provide backup power during a power outage..
  • INNOVATIVE DESIGN - The front panel of the 30AMP NEMA L5-30P 3 Prong generator inlet box is designed to be removable for wiring up. Four 1.2 inch knockouts located on the left side, right side, bottom, & back enables the power inlet box to be wired to the transfer switch or panel through different directions. Besides, the 3.1 inch in depth provides plenty of room for easy wiring..
  • ETL LISTED & SAFETY ASSURANCE - ETL certified generator plug 30 amp 4 prongs, manufactured to meet NEMA 3R rating. The built-in green indicator light on the flip lid cover lights up when the generator powers on and the cord are plugged into the box, providing a clear visible indication that your backup power system is working properly..
  • ANTY-RUST & WEATHERPROOF - Manufactured of steel with rugged, anti-corrosive coat finish, which makes the 30A generator inlet box rust proof. The spring-loaded flip lid cover with foam seal provides protection to harmful effects on the power inlet box due to....
Check Stock

BUBUQD Small Wind Turbine Generator 36W 40W 12-24V DC Permanent Magnet Motor Dual Purpose 4 Gears

  • Wind Turbine Generator has low power consumption, large torque, low noise, small size, light weight, remain stable. Motor if overload or blocked when load, the motor coil will not burn!.
  • Turbine Generator Apply to electric machinery, changes in temperature valve,automation instruments and meters, electric model, massager, twist wire machine,etc. Series of products the best choice..
  • turbine Multi-purpose Sanyo Electric Power Generator 40W(Wind power,Hydraulic power,Hand crank Power)..
  • Maximum drive:12V 100W LED bulbs,12V 40W incandescent light bulb.
Check Stock

30 Amp Generator Power Inlet Box,NEMA 3R/L14-30P Power Inlet Box,125/250 Volt,7500 Watts Generator Inlet Box for 4 Prong Generator Cord,Weatherproof for Outdoor Use,With Indicator Light,ETL Listed

  • 【Safety Certificate】30amp 125/250V,7500W Power Inlet Box NEMA 3R power inlet box,suitable for all 30amp 4 prong NEMA L14-30P generator and cord.The wire gauge of the generator inlet box is 10AWG. The weatherproof design can be installed outdoors and is very suitable for use as a backup power supply during a power outage..
  • 【Weatherproof & Rustproof】Our power intlet box is made of 100% metal and covered with corrosion resistant coating inside and out.The front cover of the power inlet box can be closed when not in use,which can effectively prevent the intrusion of water and dust. And our generator power inlet box has passed ETL certification..
  • 【Green Power Indicator Light】 When the generator cable is inserted and the Generator Power is turned on, a green light will light up on the flip cover to provide the best performance and higher.Can provide more safety and convenience at night..
  • 【Larger Space for Wiring】Compared with ordinary charging box, our charging box has increased 60% of the space, the front of the box can be removable, wiring will be easier,and it is also more conducive to the heat dissipation of the charging box, increasing safety..
  • 【Satisfaction Guaranteed】 We follow the concept of customer first and provide 24 hours a day....
Check Stock

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 2 position switches to turn each light Off or On Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of da....
Check Stock

Bandit Generator Multi-Species Minnow Jerkbait Glowing Fishing Lure, Fishing Accessories, Excellent for Bass and Walleye, 4 5/8", 3/4 oz, Replacement Glowsticks, 4 Pack

  • Designed specifically for the Bandit Generator.
  • Bandit Generator has insertion points toward the front and back to illuminate the lure and call fish from far away, even in stained water and under low-light conditions.
  • Don’t get caught in the dark when you are ready to re-light a Generator.
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case o....
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in cas....
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable....
Check Stock

GeepKey Latest 50 Amp Generator Power Inlet Box NEMA 3R Generator Receptacle 50 Amp NEMA SS 2-50P PB50 Weatherproof Inlet Box 125/250 Volt,12500 Watts Generator Transfer Switch ETL Listed

  • ETL Certification: 125/250V, 12500W, 50Amp generator inlet box with CS6375 inlet generator plug, suitable for all 50 amp NEMA SS2-50 generator cord.....
  • Best Choice for Outdoor: the whole body of GeepKey generator power inlet box is covered with anti-rust coating, with powerful features such as wind,....
  • Green Safety Light: There is a clear green warning light on the flip cover, which will be lit when the power connection is successful.
  • Large Space with 4 Way Connection: The large space of 6.1*4.1*3.1 inches allows you to wire more neatly.
  • the heat dissipation effect is better, and it....
  • 100% satisfactory service: This product is an upgraded model developed by us in accordance with market needs. Its performance, material, life, safety....
Check Stock