Reviews General Purpose End Mills

SpeTool 1/4 End Mill for Aluminum 3 Flutes CNC Spiral Router Bit for Aluminum Cut Non-Ferrous Metal Upcut 2.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/4” shank, 1/4” cutting diameter, 3/4” cutting length and 2-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/4" collet..
Check Stock

SpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

  • Diameter for Bore in Shell End Mill 1/2".
  • Diameter range of standard end mills is 1-1/4 to 1-1/2"..
Check Stock

White Mountain Puzzles Cereal Boxes - 1000 Piece Jigsaw Puzzle

  • A customer favorite: introducing a new and improved image of the popular White Mountain puzzles – cereal boxes jigsaw puzzle, now with all new artwork from general Mills..
  • Specifics: includes 1, 000 extra large puzzle pieces made of sturdy blue chipboard on recycled paper. Completed puzzle Dimensions: 24 x 30 inches. 100% customer satisfaction guarantee. Made in USA..
  • For the cereal Lover: featuring a collage of the timeless General Mills cereal boxes, This colorful jigsaw puzzle will bring hours of fun and entertainment to both young and old cereal lovers..
  • More to puzzle building: art jigsaw puzzles are a fun, inexpensive way to enjoy works of art first hand. Use to boost valuable motor skills, hand-eye coordination, and problem solving skills..
  • About the artist: with his seemingly endless supply of ideas and creativity, Charlie Girard is one of our most popular designers and the creator of fantastic and unique collage puzzles..
Check Stock

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

  • Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
  • Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
  • This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
  • Shell mills can easily be held with Straight Shank arbors.
  • Clearance & relief angels are built into the base.
Check Stock

MSA 475396 Skullgard Cap Style Safety Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Cap, Made of Phenolic Resin, Radiant Heat Loads up to 350F - Standard Size in White

  • HIGH QUALITY PROTECTION: Intended for general purpose use or in places elevated temperatures. These Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
  • MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
  • FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
  • VARIETY OF SIZES & COLORS: Comes available in a large variety of colors an....
Check Stock

MSA 475408 Skullgard Full-Brim Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Hat, Made of Phenolic Resin, Radiant Heat Loads up to 350F - Standard Size in White

  • HIGH QUALITY PROTECTION: Intended for general purpose use or in places elevated temperatures. These Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
  • MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
  • FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
  • VARIETY OF SIZES & COLORS: Comes available in a large variety of colors an....
Check Stock

MSA 475407 Skullgard Full-Brim Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Hat, Made of Phenolic Resin, Radiant Heat Loads up to 350F - Standard Size in Natural Tan

  • HIGH QUALITY PROTECTION: Intended for general purpose use or in places elevated temperatures. These Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
  • MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
  • FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
  • VARIETY OF SIZES & COLORS: Comes available in a large variety of colors an....
Check Stock