Reviews Gas Range Fittings

D.N. Industrial Grade Yellow Plumbers Teflon Tape, Gas Line Pipe Thread Tape, Twice Longer and Higher Density (1.3 g/cm3) Propane Yellow Tape Perfect for Gas Fittings (1/2\

  • Size and Quality: D.N. 1/2 inch yellow plumbers Teflon tape Thickness is: 0.004” (0.075mm), Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%.
  • High density: Yellow teflon tape density is 1.3 g/cm3 ( gram per cubic centimeter).
  • Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets CSA 20755, UL MH25811 approved.
  • Each roll of yellow Sealant Tape has a width of 1/2 inch which is suitable for for gas fittings. The length of this gas seal tape Model is twice longer as the same models.
  • plumbing tape has a sealing function to prevent the leakage, Yellow gas Sealant Tape Perfect for gas fittings.
Check Stock

Legines Brass SAE 45 Degree Flared Tube Fitting, Long Flare Nut, 5/16\ Tube OD (2 pcs)

  • Long flare nut for connecting to a tube or fitting.
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F,Resists mechanical pullout for a more secure connection.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Plumb Shop Brasscraft CSSL54-24P Stainless Steel Gas Dryer Connector, 24-Inch

  • Flexible stainless steel corrugated tubing with stainless fittings.
  • A.G.A. Approved for indoor or outdoor use according to ANSI Z21.24 and Z21.45. 1/2" Male I.P.S. X 1/2" Female I.P.S. Fittings.
  • Corrugated flexible Stainless Steel gas dryer connector.
  • Polymer coated, 1/2-Inch inside diameter, 5/8-Inch outside diameter, tube with fittings.
Check Stock

Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small

  • 5-piece universal gas-appliance hook-up kit.
  • Comes with everything needed for installing most gas appliances.
  • Includes 18-inch flexible gas line, 3 different couplings and on/off valve.
  • On/off valve provides easy servicing of appliances or summer shutdown.
  • Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters.
Check Stock

TAISHER 4 Pcs 1/2 Inch FNPT Heavy Duty Ball Valve Kit, 304 Stainless Steel with Blue Handles & Nipple

  • 1/2" FNPT threads for connecting to male threaded pipe fittings.
  • Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing).
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • 90 degree valve closing range, the handle can close the valve by rotating it to either side of the valve body.
  • Working temperature of -20°F to 410°F, Fast 1/4 turn open or closed operation.
Check Stock

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN6 90 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
  • 6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and servic....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • ...gh pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
  • CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel....
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

HOTaitai Portable Water Heater, 1.58 GPM 6L Propane Tankless Water Heater Portable Hot Water Heater for Outdoor Kitchen, Camping, Cabins, Barns, Black

  • ...ful. Anti-freezing protection, the drain plug can discharge the residual water inside to avoid freezing in cold areas or in case of long time idle. High-temperature protection, if the water temperature is over 75℃(167 °F), the unit will shut down automatically..
  • 【QUICK CONNECT GAS INLET】: Upgrade to gas quick fittings, only one step to install the gas hose, at the same time, with more safety for preventing any gas danger. And HOTaitai tankless water heater has compact size and folding handle allow for convenience to carry. With the portable handle, you can hang it into a hook or by using the mounting bracket on the top/back of the gas water heater. Install it in a few minutes..
  • 【LIGHTWEIGHT PORTABLE BODY】: Body size of the portable propane water heater: 17.3”*11.8”*5.3”, net weight: only 12 lb! And this 1.58 GPM portable tankless water can bring instant hot water for you when camping with your family, off-grid cabins, boating, horse trailers, stables or simply rinsing off by the pool. Also, you can wash your pets outdoor with this 1.58 GPM portable tankless water heater..
  • 【CSA CERTIFIED】：The gas quick fittings-CSA approved, to make sure no gas leaks risk when connection and simplify the connection without tools, install by one han....
Check Stock