Reviews Gas Pipe Joint

1 Inch CTS Yellow Medium-Density Poly Pipe Line for Gas Distribution PE2708 100 Feet

  • Yellow Medium-Density poly pipe for natural gas or liquid propan distribution. Bimodel MDPE (PE2708).
  • Min. Wall Thicknes: 0.090 (100 Foot Length).
  • Outstanding strength and durability providing longer pipeline service and enhanced pipeline integrity..
  • Provides outstanding resistance to slow crack growth (SCG) and rapid crack propagation (RCP) which provides for a safer gas distribution system..
  • IMPORTANT NOTE: There are various pipe sizes described as 1". This for CTS pipe not IPS pipe. These are different pipe sizing standards with different....
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • 【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
  • 【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clea....
Check Stock

SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

SYKRSS 2.25'Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.25" OD pipe to 2.25" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Roadformer 5" Exhaust Clamp Narrow Band Stainless Steel (2 Pack)

  • This 5" exhaust clamp is made in Stainless Steel. Used to joint 5 inch OD pipe slip fit into ID pipe for connection. Two pieces included in a single pack.
  • Pre-attached hardware for fast, easy and accurate installation, Roadformer Clamp technology provides simple, effective way to maintain and repair your exhaust system.
  • Grade 10.9 bolts provided superior capability of clamping and sealing. This narrow band clamp does create over a ton of clamping force without crushing pipes, resulting in strong and serviceable joint. The working torque is in the range of 40-50 ft-lbs.
  • Our innovation Reaction Block Technology provides a full 360-degree equal distribution of stretching force, prohibiting pipe distortion, durable installation without damage to pipe ends.
  • Roadformer Clamps set industry standard in premium quality and affordable price. Roadformer private labeled products do means Quality, Trust and Responsibility.
Check Stock

Msfullsea Vertical Laminar Flow Hood Air Flow Clean Bench Workstation Vertical Laminar Dust Free Room Worktable for Phone LCD Repair Only 1 HEPA Filter (Air Flow Hood)

  • The fume extractor arm is generally used in laboratories, chemical plants, hospitals, mold halls, chemical reaction kettles, welding industry, injection molding machine industry and etc..
  • Lab Fume Hoods can discharge fume, dust, gases, and suspended particles, etc..
  • Smoke extractor arm is mounted on the ceiling，360°free rotation， positioning joints can be swung up and down freely, there are buttons to adjust the tightness of the joints..
  • Transparent lid made of PC material can It can withstand high temperatures of 150 degrees Celsius, with a gas control valve, manually adjust the external valve knob to control the gas flow..
  • Using expansion screws to fix the ceiling fixed base of the lab extractor hood, use self-tapping screws to fix the 360-degree rotation joint, the T-junction connects with the smoke exhaust pipe or smoke system..
Check Stock

JOPOO Pipe Lighter Gas Butane Refillable Soft Flame with Pipe Cleaner Tools (Sold Without Gas)

  • Adjustable and refillable soft flame pipe lighter.(Sold without gas butane).
  • Durable metal body and classic design, the three tools attached are extremely useful for a pipe smoker..
  • Pipe lighter angled soft flame without burning your thumb..
  • The way this lighter is designed makes it handy for other occasional situations: light up candles, gas oven, or even caramelize sugar on cakes..
  • Big piece of advice, ensure you check the gas adjustion is turned down at the first use time..
Check Stock

PowerSmart 26-Inch Self-Propelled Lawn Mower, 80V Lithium-Ion Dual-Force Cutting Cordless Lawn Mower with 6.0Ah Battery & Charger

  • 26-Inch Cutting Path, Double-Blade Mower With Dual Power.
  • Equipped With The Water Pipe Joint, Squeaky Clean, Easily Clean The Underside Of The Deck.
  • No Cords, No Gas, Low Noise - Powered By 80V 6.0Ah Lithium-Ion Battery.
  • Brushless Motor: Reduce Interference, Quiet Operation, Maintenance Free..
  • 5-Speed Height Adjustment, Which Can Meet The Mowing Needs Of Different Heights.
Check Stock