Reviews Gas Caps

4.0 Gallon Gas Tank for 1982-1994 Harley FXR with 22MM Petcock Bung and Screw-In style gas cap Bungs - Chopper Bobber Motorcycle

  • A direct Bolt-On 4 Gallon replacement for '82-'94 Harley FXR Models..
  • Fabricated from 18 Gauge HRPO Steel with heavy duty 11 Gauge mounting tabs. Featuring new style mounts for a perfect fit..
  • Screw-In style gas cap mounts (Gas Caps not included). 22mm Petcock Bung on underside of left side of tank. 4 Gallon capacity..
  • Don't forget to check out all of our gas tank accessories like tank liners, petcocks, gas caps, sight glasses and gauges..
Check Stock

WANLIAN Harley Fuel Caps, OEM Compatible with 1996-2015 Harley Davidson Sportster 48 883 XL1200 Scooter Motorcycle Gas Cap Fuel Tank Screw Thread(POP-UP-Bronze)

  • Excellent Quality ( Not Made in China ) New Gloss Black Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Gloss Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson OEM 61272-91A 92A.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

Taiss 5PCS Motorcycle Gas Cap (Red) Gas Fuel Tank Cap Vent, Breathing Tube Hose Two-Way Fuel-Saving Breather Cap, Suitable For All Off-Road Motorcycles, ATVs.F-008-R-5P

  • ***SOLD AS A SET*** OE Style Chrome Vented / Non-Vented Fat Bob DUAL Gas Caps - LEFT & RIGHT Side For 1982-Up Harley Davidson 2-Piece Fat Bob Tanks.
  • One left-hand threaded cap and one right-hand threaded cap specifically for 2-Piece "Fat-Bob" gas tanks..
  • Vented & Non-Vented Caps - One cap is vented in both directions to prevent excessive gas tank pressure build up. The other is not vented..
  • These low profile caps will make for a sleek addition to any tank..
  • Fits 1982 and later Harley Davidson 2-Piece Fat Bob Tanks..
Check Stock

2 PACK Gas Can Stopper Cap Replacement Part or Spout Cap Compatible with Midwest Scepter Moeller Eagle Gott Rubbermaid Essence Igloo Blitz StanCan Kolpin RotopaX can,For Plastic Fuel Tank

  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, you can bend freely without breaking.Thicker....
  • Update your old gas can with these flexible spout, you will never spill gas all over yourself and your equipment again.
  • Push - in vent cap for faster and safer emptying, filter/flame arrestor prevent any serious damage for smoother and cleaner pouring.
  • Gas Can Spout Kit Come with Fine&Coarse thread screw caps, UNIVERSAL compatible with Rubber main Essence Blitz and Gott Scepter Midwest most of....
  • Kit includes (1) Flexible gas spout, (1) spout cap with string, (1) "O" ring gasket, (2) base caps, (1) push-in vent cap,(1)black rear vent cap. 3....
Check Stock

Screw-in Ratcheting Chrome Vented Gas Cap Motorcycle Tank Sportster Bobber Harley Davidson Dyna Chopper Fuel Caps Bike OEM 61272-92A 91A Drag Specialties 139568 390281 V Twin 38-0325 Softail 1996-2017

  • Excellent Quality ( Not Made in China ) New Chrome Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Chrome Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are chromed steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson OEM 61272-91A 92A.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

Screw-in Ratcheting Gloss Black Vented Gas Cap Motorcycle Tank Sportster Bobber Harley Davidson Dyna Chopper Fuel Caps OEM 61272-92A 91A Drag Specialties 139568 390281 V Twin 38-0325 Softail 1996-2017

  • Excellent Quality ( Not Made in China ) New Gloss Black Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Gloss Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson OEM 61272-91A 92A.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

EZ Pour Gas Can Spout Replacement Bundle – Includes Replacement Spout with Reducer Tip, Fine Thread Base Cap Kit, Push-in Vent & Engine Oil Dipstick – Update Old Gas Cans (Deal of 4)

  • HIGH COMPATIBILITY: EZ-Pour designs highly compatible spout replacement caps. They are specially made for our Rigid #70070 and #80080 kits many others..
  • EASY TO USE: The replacement spout caps are easy to install on your fuel, diesel, kerosene, and water can rigid spouts. All you need to do is place the cap onto the spout, push, and twist to lock. Now, your spout cap will secure the fuel or gas inside the can..
  • PACK OF 2: The package includes two caps for fuel, water, and gas can rigid spouts..
  • PREMIUM QUALITY MATERIAL: Our EZ-POUR replacement spout caps are made out of high-quality material, so they won't break and will hold up to years of activity. The RIGID Spout Caps provide a lasting experience..
  • NO SPILLAGE: Lost or broke a rigid spout cap? Worry no more.
  • EZ-Pour brings you a deal of two spout replacement caps. Once you put the cap on the can's spout, you can expect a hassle-free experience as it ensures no spillage..
Check Stock

EZ-POUR Replacement HI-FLO Spout Cap 2 pack - Update your Can!

  • EZ-POUR Replacement Hi-Flo Gas And Water Cap Let's You Update Old Cans.
  • EZ-POUR Caps Are Finely Made Cap For Transportation Or Storage.
  • Caps Won't Break And Will Prevent Spills.
  • HI-FLO Spout Cap Fits HI-FLO Gas Spouts And HI-FLO Water Spouts.
Check Stock

Locking Screw-in Ratcheting Chrome Vented Key Lock Gas Cap Motorcycle Tank Sportster Harley Davidson Dyna Chopper Similar Fuel Caps 03-0320A-A Drag Specialties 141892 Softail 1996-2017 J&P 7200843

  • Excellent Quality ( Not Made in China ) New Chrome Locking Key Lock Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Locking Key Lock Without Slide Cover Chrome Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are chromed steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson 2 Keys included.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock