Reviews Garden Wiring Terminal Blocks

Leviton 1451-2TM 15 Amp, 120 Volt, Toggle Framed Single-Pole Ac Quiet Switch, Residential Grade, Grounding, 10-Pack, Light Almond

  • Faster installation with combination of Side wiring and quickwire push-in wiring.
  • Terminal screws accept up to no. 12 awg Copper or copper-clad wire.
  • Quickwire push-in terminals accept no. 14 awg solid Copper wire only.
  • Large triple combination screws robertson/Phillips/slotted for fast wiring.
  • Impact-resistant, durable thermoplastic Toggle and Frame.
  • Faster installation with combination of side wiring and Quickwire push-in wiring^Terminal screws accept up to No. 12 AWG copper or copper-clad wire^Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Large triple combination screws Robertson/Phillips/Slotted for fast wiring^Impact-resistant, durable thermoplastic toggle and frame.
Check Stock

400Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit Golden with Insulating Sleeve for Electrical Wiring Car Audio Speaker N-002

  • Three types of gold flat terminal set (2.8mm, 4.8mm, 6.3mm male and female) total are used in toggle switch, speaker, horn, etc. This terminal set contains 480 products, 240 terminal insulated sleeves, 120 female insulated sleeve, and 480 total products. It is a fastel terminal that is always used for car, motorcycle, home center, wiring work, repair..
  • It is made of high quality brass, and it has good electrical conductivity and durability. This connection terminal set has a large number of male Messiah terminals and insulated male / female sleeve, so please use it in a safe manner..
  • The safety cover is attached to each of the male and female terminals. It is the terminal terminal set suitable for insulation such as electric wire, horn, general relay, etc. A flat terminal terminal is used for connecting horn, speaker, and general relay..
  • First, the insulated sleeve is connected to the wire, and then the female and the male terminal of the male are connected to the end of the cable. Please note: connect the wiring cord using a dedicated electrician pouch..
  • This terminal set (110, 50, 187, 40, 250, 30) comes with a plastic storage case, easy to carry and take out. It is widely applied to automobiles, motorcycles, transportation, machinery, distribution, el....
Check Stock

PSEQT 6 Terminal Bus Bar Ground Power Distribution Terminal Block Bus Bar with Cover for Auto Marine Car Pickup Trailer RV Boat - Red & Black 2Pcs

  • ✅【Main Parameters】A pair of red & black base 6 screw terminal power distribution block with ring terminal and cover, wide range of use to protect your safety. Max voltage: 300V AC/48V DC.
  • Continuous Rating: 130A AC/150A DC. Terminal Screw: M4 x 6.
  • ✅【Safety Quality】Nickel-plated copper busbar contact plate has low resistance, maximum conductivity and anti-corrosion protection. High temperature resistance, abrasion resistance, and safer use. 6 terminal bus bars are ideal for car and marine boat wiring, helping to organize and clean up messy wiring, suitable for all types of power and ground distribution..
  • ✅【Excellent Accessories】Transparent polycarbonate cover adds extra protection, fireproof and dustproof, and protection from accidental touch. Environmentally friendly flame-retardant nylon base has best mechanical strength and durability. Stainless steel studs and screws are anti-rust and anti-corrosion, suitable for any environment..
  • ✅【Wide Application】Widely used for car, pickup, Trailer, RV, motorcycle, recreational vehicles, truck, Van, caravan, yacht, boat, etc. 6-position single-row busbar provides neat and clean finish for any installation in your boat or car, perfect for all your electrical wiring p....
Check Stock

HDMI Solderless Signals Terminal,Gelrhonr Gold Plated HDMI Free Welding Connector Breakout Board with Breakout Plastic Cover,Screwdriver

  • ✪ HDMI Solderless Signals Terminal:No soldering needed! All signal ports is printed with wire number on both sides of the board for quick wiring,which is really nice because we sometimes forgetting the sequence..
  • ✪ HDMI adapter signals terminal is equipped with a crimping ringof tail pipe. Make sure that the cable is pulled in use without causing dropped wires or poor contact.Suitable for the cable up to 10mm.
  • ✪ The breakout board comes already installed in a plastic hood enclosure with a openable cover.For a wire holder for fixing cable and avoiding twisting.Snap-on construction that opens and closes easily and is sturdy and secure after closing..
  • ✪ Compact design and reliable connection, solderless type, Adopt environmentally friendly insulated terminal block.JRequires only a screwdriver and a wire stripper to terminate HDMI cables, slide in your stranded or solid-core wire, and re-tighten..
  • ✪ Little tips：Due to the different manufacturers,so the most HDMI have varying wiring plans.The actual wiring could be different depending on your equipment.（You can use the multimeter test to connect this HDMI solderless soldering head）If only one end needs to be changed, please apply the same wiring structure that was in use..
Check Stock

UOHGDPY DIN Rail Terminal Blocks,Universal Compact Wire Wiring Connector (40 pcs connectors+4 pcs Article in Parallel+4 pcs Digital Identification+2 pcs Fixed clamp+40 pcs Screw)

  • 【Easy to Use】The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time..
  • 【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 40pcs 12AWG terminal blocks, 4pcs connection bar, 4pcs digital identification, 2Pcs Fixed clamp,40pcs screws, 2pcs end stopper bracket and a transparent storage box..
  • 【Universal Compatibility】 This Wire Connector is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm² /28-12 AWG, flexible wire 0.5-2.5mm² /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc..
  • 【Premium Quality】Terminal blocks, high quality brass metal body and the best flame retardant insulating material modified nylon PA66 shell, it has a long life, no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail..
Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
Check Stock

Spurtar Battery Terminal Connectors 0/4/8/10 Gauge AWG Heavy Duty Top Post AMP Battery Terminal Auto Car Audio Battery Terminal Cable Ends Replacement Positive & Negative with 2 Clear Covers and Shims

  • Secure & Stable: Spurtar battery terminals are perfect for car battery terminals to make a tight and secure connection without any hassle with complex installation. It's the perfect tool to help protect the battery terminal ends in daily use..
  • 2/4/8/10 AWG Gauge Inputs: Battery terminal connectors have 4 different sizes of a wiring outlet for easy wiring modification. Includes Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector.
  • Quality Material: Battery connectors are made of zinc alloy and copper material for strong electrical conductivity to help reduce current transmission loss. Also, it can protect the battery post against corrosion to prolong the lifespan.
  • Universal Fit: Spurtar Car battery terminal clamps is the best solution to organize and connect multiple cables together. Suitable for most models of car Audio battery and it works great to replace the worn out and corroded terminals.
  • NOTE: The hole of the Positive Terminal is 19mm while the Negative Terminal is 17mm. The Positive is Bigger than The Negative, please check before purchasing.
Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
  • 【Wide Application】These battery terminal connectors can be used for ....
Check Stock

LotFancy Battery Terminal Connectors, 0/2/4/8/10 Gauge Positive & Negative Car Audio Battery Terminals with Spacer Shims, Auto Car Marine Boat Terminals Replacement, 1 Pair

  • 【Four Wiring Outlet】Two 0/2/4 Gauge Inputs and two 8/10 Gauge Inputs. Designed for multiple cables connection. Easy to modify the wiring.
  • 【Clamp Wire Tightly】The connectors are held in with a screw and make a tight and secure connection. Easy to install and only required two Alan wrenches.
  • 【Positive Negative Terminal】Our positive Terminal is designed for a 17.5mm tapering post And (-) Negative Terminal is designed for a 15.9mm tapering post.
  • 【NOTE】Please confirm the tapered post size before purchasing. Our terminal connectors only work with standard top post tapered terminal, NOT include JIS Pensil Post. (JIS pensil posts are visibly narrower at 13.1mm for negative post and 14.7mm for the positive).
  • 【Sturdy & Durable】 Zinc Alloy and Copper Material for Strong Electrical Conductivity, Super Corrosion Resistance, Reduce Current Transmission Loss. Also protect battery post against corrosion for long battery life time.
Check Stock