Reviews Full Scale Pressure Calibrator

Winters Instruments - PFQ807R1 -807R1 PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-300 psi, 2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Winters Instruments - PFQ804R1 -804R1 PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-100 psi, 2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

JIFETOR AC Charge Hose with Gauge, Car R134A Refrigerant Recharge Kit, Auto Air Conditioning U Charging Hose Low Pressure Measuring Meter with 1/2" Can Tap and R134A Quick Coupler, 100PSI

  • AC U CHARGE HOSE: R134A charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. Total length is 19", ideal for easy to reach AC suction service port, for example the AC connector is right on top of your engine compartment..
  • REFRIGERANT CHARGING GAUGE: Right in the middle of the refrigerant recharge hose, there is a AC low pressure gauge with scale range 0-100PSI / 0-7kg/cm². Equipped with metal scale plate, color coded scale range to mark pressure state with LOW FULL ALERT DANGER. Easy to monitor the automotive air conditioning low pressure side pressure, to insure a accurate R134A recharge..
  • METAL QUICK COUPLER AND CAN TAP: One side is metal quick interface coupler with accurate snap lock and anti-slip grip ring, easy to connect and disconnect, compatible with all models with standard R134A suction service port. The other side is metal can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly..
Check Stock

ennoLogic Volt mA Loop Process Calibrator eC380V - 0-20V and 4-20mA Signal Generator Simulator – Portable Precision Volt Millivolt and mA Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, PLC....
  • BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire....
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution) and 0-20V (1mV resolution) with....
  • GENERATE PRECISE TEST VOLTAGES AND CURRENTS for testing loops, transmitters, data logger, meters or any devices that measure 4-20mA currents or sensor....
  • The eC380V Volt/mA calibrator is powered by six AAA batteries (included). The package includes one eC380V calibrator, 6 AAA batteries, carrying case,....
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

SWAT-Tourniquet, Orange

  • Measuring Range: -100 to +100 Pascals with 4-20 mA O/P.
  • Display: Integrated 4 Digit Red LED 7 Segment Display 0.5”.
  • Maximum Over Pressure : 2 Times the rated pressure.
  • Construction: Aluminium LM-6 Powder Coated Body with Flush Bezel Fitment.
  • Water Splash Proof Polycarbonate Front Sticker.
  • Sensor Type : Integrated High Speed Differential Pressure Sensor.
  • Alarm Type : Built in Buzzer Alarm for Process Violation Alert.
  • Accessories: Instruction Manual, Adapter, Calibration, Traceability.
  • Application: Hospital, Clean Room, Pharmaceutical, Isolation Room.
Check Stock

CDN IRL500 Long Stem Fry Thermometer – 12\

  • Commonly used in industrial, pulp and paper, food and beverage processing, HVAC, and OEM applications.
  • Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and leakproof IP65 & NEMA 4x.
  • 90 degree Back angle, rear threaded connection design.
  • Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an Allen wrench to discourage inadvertent tampering.
  • Manufactured in USA, with an 8 year warranty.
Check Stock

TSI Quest (Formerly 3M) eg4-D-AC3 Personal Noise Dosimeter, Dock, and Calibrator

  • Kit Includes: EDGE 4 Dosimeter with 1/4-Inch Microphone Two Windscreens, AC-300 Calibrator, Single Docking Station, Calibrator Adapter, USB Cable, Power Supply and Storage Case.
  • Displays SPL, dose, Lavg, Leq, TWA, maximum level, minimum level, peak level, exposure, and run time… all while in Run mode.
  • Independent selectable thresholds from 70 to 90dB or none, independent exchange rates for each dosimeter (3, 4, or 5 dB), and independent criterion levels from 70 to 90 dB in 1dB increments.
  • Rechargeable lithium polymer battery provides more than 60 hours of run time, and only needs to be replaced every three years.
Check Stock

OTC Tools 4278 100 GPM Hydraulic Flow Meter

  • Tests hydraulic oil circuits on your machinery with high accuracy and measures flow from 2.5 to 100 gpm.
  • Flow Accuracy to +/- 1 percent of indicated value and Pressure accuracy of +/- 1.6 percent of full scale.
  • Pressure range up to 6,000 psi and Temperatures up to 250 deg F.
  • Standard burst disc protection system prevents spillage of hydraulic fluid in the event of an overpressure condition.
  • Accommodates bi-directional flow, reads flow in both directions, pressure on the high side of valve and Port is 1-5/16" -12UN #16 SAE ORB.
Check Stock