Reviews Fuel Transfer Pump Fittings

Carter Mechanical Fuel Pump Automotive Replacement (M4685)

  • ... REDUCED CORROSION: Mechanical pump is located outside the fuel tank which provides the ultimate protection from corrosion and exposure to contaminates. Preserve your pump in the best condition while receiving reliable fuel..
  • SMOOTH & POWERFUL TRANSFER: Keep your vehicle running smoothly with Carter mechanical pump. With an enclosed camshaft, the pump is able to effectively carry fuel to the carburetor because every bit of fuel is suctioned and transported with ease..
  • SOLID STURDY BUILT: Tough in construction, Carter mechanical fuel system keeps fuel pressure at bay while effectively enclosing and guarding the fuel heat transfer..
  • VEHICLE FIT: Buick Century 1981, LeSabre 1982, Regal 1982-1981, Regal 1987-1984, Chevrolet Bel Air 1968-1967, Biscayne 1968-1967, C10 Pickup 1968, C10 Suburban 1968, C20 Pickup 1968, C20 Suburban 1968, C30 Pickup 1968 and more.
Check Stock

TWO (2) Pack of 2nd Gerantion Tera Pump 2.4GPM, 4AA Battery Powered Fuel Cell Transfer Liquid Gas Pump, 51 inch Hose fitting any racing can (VP FLO-FAST Summit Mr. Gasket LC LC2 Scribner Utility)

  • NO-LEAK TRANSFER | Our advanced build prevents leaking from the pump head during re-fueling & liquid Transfer. Transfer with out worry of spilling your precious fuel. Simply utilize Four (4) AA Batteries, Sold Seperatly to pump up gas, diesel, kerosene or even non-potable water.
  • OVERFLOW PROTECTION | Our Gas Can Pump was designed to be prevent fuel loss w/ Auto Stop Sensor built into the Nozzle. Nozzle will automatically stop pumping and warn with a bostirous beep, preventing any loss of fuel.
  • 3X TRANSFER RATES | High volume transfer rates at 2.4 Gallons per Minute or 9.2 Liters per Minute. Four AA Batteries will provide up to 250 Gallons of fuel transfer without the need to change out the batteries. Only have Two (2) Batteries? Our pump can be used with only Two AA Batteries for emergencies to save you power and money.
  • SAVE YOUR BACK | Tired of Spilling Fuel? Our Pump can help and save you the pain and the mess. Automatically transfer fuel with a Single Hand or No Hands at All for a Hand-Free Experience | 39 inch Foot Discharge Hose + 3.8 Nozzle for transfering to Boats from the dock, Generators, ATVs, Tractors, Cars, Trucks and more.
  • PORTABLE, LIGHTWEIGHT | Easy to store anywhere for convinient use. CSA Safety Certified by the CSA Group under USA ....
Check Stock

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

  • REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
  • GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
  • At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
  • FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
  • 58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....
Check Stock

Fleece Performance Emissions Compliant CP3 Conversion Kit & Pump FPE-LML-CP3-FF-EO Compatible with 2011-2016 Chevy Silverado/GMC Sierra 2500HD 3500HD 6.6L LML Duramax Diesel

  • Convert your 2011-2016 Duramax feet s fuel system from a CP4 to a CP3 high pressure pump and get performance and peace-of-mind. Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms. Our newest kit includes all of the hardware necessary to replace the troublesome CP4 with a CP3 and requires no tuning changes and maintains all factory emissions controls..
  • CP3 Pump Billet CP3 Engine Block Adaptor High Pressure Fuel Rail Line Low Pressure Fuel Feed Line Return Fuel Hose.
  • CP3 Feed Hose Fuel Rail Nut (3) CP3 Block Adapter Bolts (Flange Head, M8x1.25x35mm).
  • CP3 Pump Fittings 3/8 inch CP3 Pump Fittings 1/2 inch (2) 12mm Sealing Washers.
Check Stock

GPI - EZ-8 12v Fuel Transfer Pump, Manual Shut-Off Nozzle, 8 GPM Fuel Pump, 10' Hose, Power Cord, Adjustable Suction Pipe (137100-01)

  • DURABLE ALUMINUM HOUSING: Manufactured from high-quality diecast aluminum, our 12 volt transfer pump with manual shut-off unleaded nozzle is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
  • QUICK-INSTALLATION: The EZ-8 GPI fuel transfer pump 12 volt has easy installation and direct tank mounting. The design of the pump is meant for permanent mounting on fuel storage tanks..
  • ROTARY GEAR DESIGN: The rotary gear is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 8GPM. This model’s compact design allows for easy installation and versatile pump mounting..
  • 2 YEAR WARRANTY: GPI EZ-8 fuel transfer pumps come with a 2-year warranty and are Motor U.L. Listed to U.S. and Canadian Standards. The EZ-8 has a low-maintenance design and is ideal for on ....
Check Stock

Fill-Rite FR4211H 12V 20 GPM Fuel Transfer Pump with Standard Mechanical Meter Package, Gallons Gasoline, Diesel, Kerosene, Ethanol & Methanol Blends & Biodiesel

  • 100% FACTORY TESTED: Carter mechanical fuel pumps have undergone several factory testing and received approval for reliability and long term usage. Experience quality with a reassuring 12 month limited warranty with Carter mechanical pumps..
  • REDUCED CORROSION: Mechanical pump is located outside the fuel tank which provides the ultimate protection from corrosion and exposure to contaminates. Preserve your pump in the best condition while receiving reliable fuel..
  • SMOOTH & POWERFUL TRANSFER: Keep your vehicle running smoothly with Carter mechanical pump. With an enclosed camshaft, the pump is able to effectively carry fuel to the carburetor because every bit of fuel is suctioned and transported with ease..
  • SOLID STURDY BUILT: Tough in construction, Carter mechanical fuel system keeps fuel pressure at bay while effectively enclosing and guarding the fuel heat transfer..
  • VEHICLE FIT: Chevrolet Small Block Street Performance Pump.
Check Stock

Fuel Transfer Hose 3/4 Inch Fuel Hose 20 Feet,Farm Fuel Transfer Hose with Fittings,for transferring Diesel, Kerosene & Gasoline - Fuel Tank Hose for Fuel Transfer Pumps by BOOTOP PIN

  • 3/4 Inch NPT x 20 Feet Anti-Static Replacement Fuel Hose for Fuel Transfer Pumps For Dispensing Diesel, Kerosene & Gasoline.3/4 Fuel Transfer Hose With End connections..
  • Fuel transfer pump hose Designed for use with all electric pumps..
  • This Transfer tank hose include a 3/4 Inch NPT End connection and a 1 inch NPT threaded fitting at the other end..
  • 3/4 Fuel hose, 1 diesel fuel hose, gasoline pump hose, gas tank hose,Suitable for all Fuel Transfer Pumps for FPM-12, FPM-24, FPM-115 & FPM-220 models..
  • Feel free to contact us if you have any problems. If you are not satisfied with our products,we accept all of the return,replacement or refund requests..
Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

  • Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
  • Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
  • Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock

BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings

  • [Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
  • Use to evacuate a flooded yard, pump out water from a barrel, and more.
  • [Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
  • Fittings designed to fit standard garden hose spigot.
  • [Use Your Pump]: Threaded brass ends for use with your water pump.
  • Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
  • [No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
  • [Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.
Check Stock