Reviews Fuel Injection Tester

Amprobe AT-8020 Advanced Industrial Wire Tracer Kit

  • 【FUNCTION UPGRADE】 KZYEE KM50 Circuit Tester Kit is an upgraded version of KM10, which performs each type of testing modes, like DC Voltage, AC Voltage, Signal Frequency, Duty Cycle, Fuel Injection, Resistance, and Diode.
  • 【QUICK DIAGNOSIS】Quicker troubleshoot and diagnose circuit conditions by switching waveform display from the digital display for AC Voltage, Frequency, Duty Cycle, and Fuel Inject testings by long-pressing the mode button for 3 seconds.
  • 【WIDELY APPLICATION】Works on 12V 100-2000CCA lead acid batteries , including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. Also, it is suitable for cars, motorcycles, trucks, ATVs, SUVs, boats, yachts, mowers, and even golf carts and lawn tractors batteries.
  • 【CRANKING & CHARGING SYSTEM TEST】Presents you with the test results (actual cranking voltage & cranking time) of the starter system in milliseconds to indicate if the cranking system is working as expected. Also, the battery load tester conducts a throughout check on the 12V charging system to make sure a normal generator output，perfectly working rectifier diode and under controlled charging current.
  • 【SAFE PROTECTION DESIGN】The battery tester doesn’t emit light, heat or spark, and won’t discharge the battery. It ....
Check Stock

Lichamp Fuel Pressure Gauge, Fuel Pump Pressure Test Kit with Hose Adapter, Compatible with Honda, Ford CFI EFI, GM MPI and Chrysler MPFI

  • FUEL PRESSURE TESTER - Automotive fuel injector tester kit tests fuel supply & injection system problems, help to judge if there are broken internal components or faulty oil lines..
  • PARTIAL COMPATIBILITY - Suitable for limited gasoline engines with 1/4", 3/8" and 5/16" fuel line connector, compatible with Honda, Ford CFI EFI, GM MPI and Chrysler MPFI..
  • UP TO 100PSI / 7BAR - Provide with dual scale accurate readings 0-100psi (0-7 bar), easy to read and provide you more precise and accurate readings..
  • FOUR IN ONE SET - Equipped with accurate gauge and three hair pin T-adapter which sized 6.30mm(SAE 1/4)7.89mm(SAE 5/16)9.49mm(SAE 3/8)..
  • LONG LASTING MATERIALS - Designed for repeated use with high quality materials (Brass, Steel, Rubber, Plastic), rugged and long-lasting. Excellent air-tightness and avoid any leaking..
Check Stock

Adorish 0-140PSI Fuel Injector Injection Pump Pressure Tester Gauge Kit Fuel Pressure Test Kit TU-114 for Auto Car Truck SUV Motorcycle ATV RV

  • Application: Fuel pump pressure tester is suitable for various gasoline engines such as cars, trucks, SUVs, motorcycles, ATVs, RVs (except Bo-sch, CIS Je-tronic, GM car throttle body systems), not suitable for diesel high-pressure injection pumps or direct injection engines..
  • Fittings & Hoses: M8/M10/M12/M14 adapter for corresponding fuel Test port on rails.
  • 15"L hose for direct connection to 1/4" SAE standard US valve on the fuel pump.
  • Aluminum tee helps in-line splicing between the fuel pump and engine on most vehicles..
  • Fuel Pressure Gauge: A large 3-1/2" dial protected by a rubber cover, a 0-140psi/0-10bar range, and a two-color coded scale for easy reading..
  • Material: Made of high-quality brass, steel, rubber, plastic, provide accurate reading and long-lasting products..
  • Storage: Nice carrying case and a well-made tool, great for DIY or even professional use..
Check Stock

CATOOL Fuel Injector Injection Pump Pressure Tester Gauge Kit ,0-140PSI Fuel Pressure Gauge,Leak Down Tester,Gas Fuel Injector Tester

  • 【UNIVERSAL DESIGN】:hoses and fittings cover all fuel injection systems and most cars.
  • 【Accurate Reading】: With a scale of 0-140 PSI /0-10 bar scale, the versatile fuel pressure gauge kit boasts dual dials for accurate reading and great precision.
  • 【DURABLE】: Anti-corrosion materials to ensure long lasting using life..
  • 【A MONEY-SAVING TOOL】: Save hundreds of dollars on fuel injection tester kit.a must-have tool in your garage.
  • 【BUY WITH CONFIDENCE】:CATOOL specializes in high-quality auto parts,If there is any question with our products or during use, please feel free to contact us first, we are here to provide professional technical support ASAP in 24h and will do our best for your satisfaction..
Check Stock

9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Red)

  • ...s protected by an anti-scratch coating and rubber protection to absorb shocks.
  • Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
  • 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
  • And then start the threaded end of the compression gauge in a spark plug hole by hand.
  • Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
  • Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
  • Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
  • If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check Stock

9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Blue)

  • ...s protected by an anti-scratch coating and rubber protection to absorb shocks.
  • Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
  • 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
  • And then start the threaded end of the compression gauge in a spark plug hole by hand.
  • Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
  • Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
  • Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
  • If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check Stock

9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Black)

  • ...s protected by an anti-scratch coating and rubber protection to absorb shocks.
  • Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
  • 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
  • And then start the threaded end of the compression gauge in a spark plug hole by hand.
  • Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
  • Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
  • Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
  • If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check Stock

AUTOOL Fuel Injector Cleaner and Tester Machine, Automotive Ultrasonic fuel injection cleaner for All 6 Cylinder Petrol Vehicles, GDI, EFI, FSI Fuel Injection Systems Cleaners Testers 12V/70V/120V

  • 【For GDI Injector Cleaning & Test】CT400GDI fuel injector 6-cylinder cleaner and tester adopt the latest GDI design and can clean and test not only standard injectors but also GDI injectors, such as for Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines..
  • 【Upgrade Ultrasonic Cleaning】Powerful ultrasonic cleaning technology is adopted. The equipment provides complete cleaning ejector, automatic cleaning and electronic pressure adjustment control technology Different from other cleaner& tester machines, this injector cleaner comes with a cooling fan and thermal protection, and with a power of 60w, its ultrasonic cleaning capacity is significantly enhanced..
  • 【Automatic Fuel Pressure Control & Digital Display Control】 Through microcomputer fuel pressure control, the pressure control is stable, the adjustable range is large, and the fuel pressure parameters can be adjusted in real time. It can help realize automatic cleaning and testing of syringes. This fuel injector tester adopts high-definition digital control panel display, it is operated easy to understand..
Check Stock

KIMISS Fuel Injection Pump Pressure Tester Gauge Kit TU-114 Petrol Diesel Fuel Pressure Gauge Tester Fuel Injection Pump Diagnostic Tool Kit

  • ❤ 【With Automatic Diagnostic Function】❤ --- TU-114 Fuel Pressure Gauge Auto Diagnostics Tools For Fuel Injection Pump Tester. The pressure....
  • ❤ 【Protective】❤ --- The components are fitted with quick coupling systems and safety valves to prevent inadvertent discharge of fuel under....
  • ❤ 【Safe Fuel Recovery】❤ --- The gauge comes with a pressure release valve on the side of the gauge, also a long drain hose for safe fuel....
  • ❤ 【Connections For Tu-114 Fuel Pressure Gauge Tool Kit】❤ --- 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve....
  • ❤ 【Reading Range】❤ --- Fitted with 90mm gauge having two scales (psi and bar), reading from 0~140psi and 0~10bar. Pressure gauge adopts rubber....
Check Stock