Reviews Ftdi Basic Breakout V

Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On

Comes assembled and ready to rock out of the box.
0.1" Breakout pads with 5V, D- and D+ data lines, GND and VBAT.
For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells).
100mA charge current, adjustable to 500mA by soldering a jumper closed.

ATmega328 microcontroller with Optiboot (UNO) Bootloader. Compatible with Arduino IDE. R3 shield compatible..
USB Programming Facilitated by the Ubiquitous FTDI FT232RL.
Input voltage - 7-15V 0-5V outputs with 3.3V compatible inputs.
You'll also need a mini-B-to-A USB cable It powers the RedBoard and allows you to upload programs to it.

Support 4 kinds of TTL levels:This is a versatile USB to TTL converter. It is powerful enough to handle almost all TTL level communications. It is....
FTDI FT232RL Chip:Built-in original FTDI FT232RL Chip.The DSD TECH brand never uses cheap fake chips..
Not only provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND pins,but also provides access to DSR,R1,DCD,DTR,RESET pins.
Protective case: Come with a protective case, this transparent protective case can effectively prevent static interference from the hand and prevent....
WARRANTY:DSD TECH back this FTDI FT232RL USB to TTL UART adapter with 12 months warranty.If you meet any question, please contact us, we will fix your....

NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
Support up to six channels of data reception.
the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.

【Connectivity】Connects from the USB-C port of a PC /computer to the RJ45 console port of a networking switch, a modem or router with a console port.
replaces rs232 serial port perfectly, no more RS232/DB9 adapter needed. This is a Console Cable, will NOT operate over an Ethernet port for internet access!!!.
【Compatible Models】a practical serial cable to pair with branded Router, Switch, Firewall, Wireless LAN controller and other devices with console port, such as Cisco, Ubiquiti, Linksys, Juniper, Fortigate, Mikrotik, Huawei, HP ProCurve, H3C,ZTE. Powered by USB port, no external power supply required..
【Compatible Systems】built-in with FTDI-FT232RL chip, fully support Windows 10, Windows 8 / 8.1 /7, XP, Vista, macOS, Mac OS X, Linux. USB C rollover cable reverses all 8 pins in the cable to communicate from a computer Type-C port to a console port..
【Driver Installation】drivers needed before get the cable to work, drivers and instructions available for download from CableCreation.
Windows 10 and the latest macOS usually include FTDI drivers as part of the OS when using this FTDI USB cable..
【Warranty】CableCreation provides 24-month product warranty, lifetime technical support and friendly 24/7 customer service..

FTDI based USB to TTL Serial Cable are designed using the the standard FT232BL chipset.
Please note that this cable supports very low power devices-5V..
It can work with Raspberry Pi serial console.
UART interface IC device which handles all the USB signal and protocols.
What you will get is : 1 X USB to TTL serial cable.

FTDI based USB to serial communication cable to connect your training equipment to computer USB port. Works with both Mac and PC..
Enables direct connection to computer USB port. Eliminates the 9-pin serial port adapters.
Superior FTDI technology based USB to serial adapter solution. Plug an play and no driver installation required.
Cable length is about 6 feet . Easily extendable with USB extension cable.
Rugged design with overmolded USB housing. Cable USB has two LED lights for data traffic indication..