Reviews Ft2232h Breakout Module

RJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W

  • 8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
  • Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
  • RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
  • 2x20pin expansion pin header, pin height 10mm/0.39".
  • Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).
Check Stock

Treedix 2pcs Level Shifting MicroSD Breakout Board with SPI Interface Onboard Level Conversion for Arduino UNO R3

  • The module has built-in level adjustment circuit, which can realize level conversion between 5V and 3.3V microSD.
  • Hardware connection: This microsd card is equipped with a level converter, which can not only connect 5v devices other than arduino, but also prevent the SD card from being damaged.
Check Stock

Bus Power

  • Super material: It is made of electronic accessories, nickel plating on surface(anti-oxidatioan), inner conductor: pure copper.it is long lasting and durable for you to use..
  • Package including: Include 5pcs of MCP2515 Development Board. This version of the MCP2515 Breakout solves some of the board's problems. 120 ohm terminal resistors. With Impedance matching, ensures the drive capability, long distance data transmission prevents signal emission.
  • High Power High Efficiency: Supports CAN V2.0B specification, the communication speed 1Mb/s. High reliability, strong vibration resistance, good electromechanical performance. 0 to 8-byte data field. With standard frame, expand the frame and remote frame..
  • Main specification: The MCP2515 module is 5V DC power supply, SPI interface protocol control. Working current is 5mA (1 microamp standby current. Except the power indicator).
  • A wide range of applications: It is suitable for home smart devices, industrial wireless control, wireless monitoring, wireless identification, wireless positioning system signals and other applications..
Check Stock

Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi

  • The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
  • Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper..
  • FR-4 fiber glass PCB, dual copper layers..
  • 2x20 positions header connect to Raspberry Pi board..
  • Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board)..
Check Stock

KEYESTUDIO Motor Driver HAT Breakout Board for BBC Microbit TB6612FNG with Terminal Block Serial Pins

  • Specially researched and developed this motor driver breakout board to facilitate the micro bit to drive DC motor..
  • Four motor control modes: Forward/Reverse /Brake /Stop.Access to 3Pin headers connection..
  • Integrated with 3.3V and 5V voltage-regulator chip. Comes with a serial communication port for Bluetooth module..
  • EXCELLENT QUALITY: solder is very clean, everything is aligned nicely, all boards are well packed after function,voltage, current testing, protected in a beautiful box..
  • Up to FCC and CE Standard: made from environmentally friendly components and materials, as well as environmentally friendly production technology, it is really safe..
Check Stock

HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....
Check Stock

EAGWELL 200 Pcs Super Bright 12V 1.44W 3 LED Module Lights 5050 SMD RGB Color Changing 100Ft Waterproof Light Lamp for Home Garden Xmas Wedding Party Decoration or Letter Design (RGB Injection)

  • 【High Grade Commercial LED Module】Up to 20 Lumen/led output a total of 2400 Lumens, 600pcs super bright Big SMD 5050 RGB LED bulb, Red,Blue,Green basic lighting effect, can change to 12 different kind color, adjust brightness and 4 Dynamic mode by RGB remote controller..
  • 【Save Electricity Cost and Sales Picking Up】10 ft of each string ,total 100 ft (10 lots of 100 ft), provides extreme energy saving solution and brightness for your business. with upgraded DC12V input low voltage and IP67 waterproof so that module led lights can work normally when it rains or snows..
  • 【Can be Cut Off】 High energy efficient 5050 SMD module 30 watt and 200 Lumen for each . 20 Pcs led module each string ,3 Leds each module, so that module lights can be cut off to DIY your own LOGO or Lighted Store Signage..
  • 【Easy to Use】 Easy installation With Super Sticky Self-Adhesive tape on the back of each module, and optional screw holes, you can stick or hang on anywhere you like. Please search (ASIN) B082RM4XXJ of power supply and (ASIN) B082M8K68V of Remote Controller, if you need them from us ..
  • 【Extensive Applications】Can be used in LED Channel Letter Lighting, Boat Cabin & Deck Lighting,Garage,Car, Motorcycles, Cabinets, Showcase, Step lights, Makeup mirro....
Check Stock

EAGWELL Module Lights, 100 FT LED Window Lights Waterproof Storefront Light Business Decorative Lights 12V 5050 RGB LED Lights for Advertising Signs Business Store Light with SM-4P Connectors

  • 【Enough Brightness】3 LEDs for each module light, which ensure the brightness of your store, advertisements or any other attractive signs. There are 7 colors with the light: red, green, blue, purple, yellow,white, light blue. which can be switched between these 7 colors through the remote control. All Accessories are included (10 strands of LED Lights 100 feet long in total, 2 Power Plug, 2 Remote controller)..
  • 【Easy to Use】Easy installation With Super Sticky Self-Adhesive tape on the back of each module, you can stick or hang on anywhere you like.There are sm-4p connectors on the end of each strand of LED module light. It will be much easier for you to connect the lights. Just plug. No need to male female connectors any more. Please pay special attention to the positive and negative poles of the connectors to avoid short circuit..
  • 【Energy-saving】High energy efficient 5050 SMD module 30 watt and 200 Lumen for each, provides extreme energy saving solution and brightness for your business. The led window module light is powered by a 12V DC power supply and is driven by a constant current, which greatly reduces the fluctuating power efficiency, low powe....
Check Stock

HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V

  • Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission..
  • The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode..
  • It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands..
  • AT command interface with "auto baud" detection..
  • TTL serial port for serial port, you can link directly to the microcontroller.
Check Stock