Reviews Frs Axle Back

5303918301 Refrigerator Garage Heater Kit by Norward - compatible with Frigidaire Kenmore Refrigerator PS900213 AP3722172 AH900213

  • 【PACKAG INCLUDES】:5303918301 Refrigerator Garage Heater Kit (1pcs)..
  • 【COMPATIBILITY】:5303918301 Refrigerator Garage Heater Kit Compatible with Frigidaire Kenmore, Replacement for 1037646, AH900213, EA900213,....
  • 【FEATURES】:Works for Hundreds of Refrigerator model, common ones.
  • Frigidaire FRS6R5EMB, FFH1767GW, FRS6HR5HW, FRS3HR5HW, FRT18IS6CB, FRS3R5EMB,....
  • 【PLEASE NOTE】 : This heater kit will NOT work on Frigidaire refrigerators manufactured prior to 2001, on side-by-side or counter-depth models, or....
  • 【PROMISE】：If you are not completely satisfied with our accessories, you can request a replacement or a full refund. If you have any questions,....
Check Stock

PURATEN Refrigerator Garage Heater Kit for Kenmore Refrigerator Replacement Part 5303918301 AP3722172 EA900213 AH900213

  • Replacement Part: Refrigerator Garage Heater Kit. Replaces following part numbers 5303918301, 1037646, EA900213, LP15815,1037646, AH900213, LP15815,....
  • Application: Works for Hundreds of Refrigerator model, common ones, for Kenmore for FFH1767GW, FRS3HR5HW, FRS3R5EMB, FRS6HR5HW, FRS6R5EMB, FRT17B3AW,....
  • Function: Help your refrigeration system perform better. Clears the dumbness behind your refrigeration and helps parts respond well..
  • Material: This part is made from aluminum plate materials. Replacement heater kit for refrigerators you put in your garage..
  • Easy Use: It is easy to install, saves time and effort, and can save you a large amount of maintenance costs.Size(LxWxH): About 8.5x6.3x0.5....
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Bstinay Refrigerator Garage Heater Kit Replacement for AP3722172 5303918301

  • Replacement for Electrolux, Replacement for frigidaire, Replacement for kelvinator, Replacement for Gibson.
  • Replaceable part numbers: 5303918301, 1037646, Replacement for AH900213, Replacement for EA900213, Replacement for PS900213, Replacement for LP15815,....
  • Compatible Models: Replacement for FFH1767GW, Replacement for FRS3HR5HW, Replacement for FRS3R5EMB, Replacement for FRS6HR5HW, Replacement for....
  • This kit is designed for overhead freezer refrigerators (manufactured after 2001) placed in garages or basements, where refrigerator temperatures are....
  • Note: This heater does not apply to: refrigerators manufactured before 2001, and side-by-side, reverse-depth refrigerators and models with electronic....
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

4 PCS - 2\ Inch x 8 ft Flexible Axle Tie Down All in One Combo Strap with Snap Hook Ratchet 3,300 lbs Safe Working Load - Haul Car, Race, Truck, ATV, UTV SUV Polyester UV Resistant

  • ⭐High Quality Polyester Webbing Material: Hi-Gear Axle Ratchet Tie-Down Straps are made of Polyester Webbing Material and Hi-Test Webbing Protects you from shock during transportation. Polyester Webbing Material is very Soft, Pliable, good heat resistance, good moisture absorption. It is also less susceptible to wear and tear..
  • ⭐Secure Flat Snap Hooks: Hi-Gear Axle Ratchet Straps include Ratchet Buckles, have Flat Snap Hooks on both ends. These Extra-strong Snap Hooks mate easily with axle strap D rings and anchor points on your deck, provides you the most secure connection and you won't lose strap. The snap hooks include spring loaded latches for extra safety..
  • ⭐Strap Size, Break Strength, and Durability: Hi-Gear 2 inches Wide and 8 feet Long axle straps are very Strong and Flexible. And Minimum Breaking Strength of Hi-Gear Flexible Axle Tie-Down Ratchet Straps is 3300lbs. Axle Straps have excellent durability and long service life..
  • ⭐Heavy Duty Axle Straps For Car Trailer: Auto Haulers can use our heavy duty Hi-Gear Axle Tie-Down Straps to create securement around the car's front or rear axles for towing or tie-down purposes. Axle Straps are a must when securing a vehicle for transport by the axle or through the rims..
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ⚒️ Quick to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use....
Check Stock

TIDRADIO TD-H5 GMRS Radio with 4pcs 1500mah Batteries, 5Watt GMRS Handheld Radio for Adults, GMRS Repeater Capable, Two Way Radio with NOAA Weather Receiver & Scan (2 Pack)

  • ... has 250 channels, including 22 GMRS and 8 GMRS repeater channels that work out of box. 155 privacy codes give you up to 3,410 channel options to block irrelevant conversations when communicating with other GMRS/FRS radio. .
  • ✔️[4 Pcs Batteries] Two batteries for each GMRS handheld radio, one for use and one for backup providing you a non-stop communication experience. The 2-in1 Type-C USB charging can charge two devices at once, saving more time. No need to worry about running out of battery on the road..
  • ✔️[Speaker Mic for Outdoor] Enjoy loud and clear sound quality even in a noisy outdoor environment. This Bundle comes with two High-quality Speaker Mics that have excellent sound quality without static. These mic have a sturdy outer shell, bigger button design, stretchable and handy wire, and rotatable back clip. Come get this mic and save you more money in a long run!.
  • ✔️[Long Range & Repeater Capable] 5Watt high power output and GMRS Repeater provide you better communication distance than 2Watt FRS radio. 8 preprogrammed repeater channels and Extra 24 DIY repeater channels help you hit GMRS repeater, making it easier to maintain good communication quality with your partner in the outdoors..
  • ✔️[NOAA Weather Scan & Alert] One step ahea....
Check Stock

12 Pcs Bike Wheel Axle Nut and Safety Washer Kit 3 Sizes Bicycle Hub Flanged Hardware Nuts Steel Flange Nuts Wheel Retaining Bicycle Hook Hub Parts for Front and Rear Bike Wheel Mountain Road

  • Reliable and Sturdy: these wheel axle nuts are made of steel, hard to deform, bend or break, not easy to rust, smooth and bright on surface, with clear and neat thread, without burrs or pointed edges, delicate and serviceable, with a long service life.
  • What's Included: the package contains 2 pieces of M 9.5 bike nuts, 2 pieces of M 8 bike nuts, 2 pieces of M 10 bike nuts, 4 pieces of bike axle washers about 10 mm/ 0.39 inch, 2 pieces of bike axle washers approx. 8.5 mm/ 0.33 inch, various in sizes and sufficient in quantity, enough to meet your replacement needs of bicycle parts.
  • Size Information: this M 8 flange nut is about 0.6 inch in overall width, 0.31 inch in inner diameter, 0.24 inch high, matching with safety washer approx. 0.33 inch, suitable for bicycle front axle.
  • The M 9.5 nut is about 0.71 inch wide, 0.4 inch in inner diameter, 0.6 inch high, with safety washer about 0.39 inch, nice for bike rear axle, and the M 10 nut is about 0.71 inch in overall width, 0.4 inch in inner diameter, 0.28 inch high, with safety washer about 0.39 inch, nice for middle axle.
  • Choosing Desirable Size: please measure the size of the bike axle and choose the right bicycle wheel nut, you can mark the axle with paper and measure the circumference of the circle, you ....
Check Stock